The Characterization of Welded AA 5005 Alloy with AA 5356 Filler Metals According to Slow Welding Rate Using by MIG Welding Technique

Yıl 2023, Cilt: 9 Sayı: 4, 346 - 353, 31.12.2023

Günhan Bayrak , Hüseyin Müştak

Öz

In the present study, AA 5005 cold rolled plate was used for welding application with AA 5356 filler materials using MIG welding process. Slow (780 mm/min) welding rate was applied for weld joint of the plate. After the welding operation, NDT tests (Visual Test, Liquid Penetrant Test, Radiography Test) and X ray Diffraction analyzes were applied to the welded plates for proving the weld quality and determination of the phases in the weld beat during the solidification of the weld pool. Then, microstructural color metallography technique was used for the investigations of grain size distribution of the weld joint and heat affected zone and base metal. Vickers microhardness tests applied on the cross-section of the weld joint together with HAZ and base metal. In addition these, tensile tests were realized for the determination of the mechanical properties of the welded cold worked AA 5005 alloy with AA5356.

Anahtar Kelimeler

AA 5005 Alloy, MIG Weld, Welding Rate, NDT, Characterization

Destekleyen Kurum

Sakarya Applied Science University , Asaş Alüminyum Ticaret A.Ş

Kaynakça

• [1]Davis, J. R. (Ed.). (1999). Corrosion of aluminum and aluminum alloys. Asm International.
• [2]. Quebbou, Z., Chafi, M., & Omari, L. E. H. (2021). Corrosion resistance of 5005 aluminum alloy by anodizing treatment in a mixture of phosphoric and boric acids. Materials Today: Proceedings, 37; 3854-3859.
• [3]. Kaluç, E., & Taban, E. (2004). EN AW-5083-H321 Alüminyum alaşımının MIG, TIG ve sürtünen eleman ile birleştirme (FSW) kaynaklı bağlantılarının mekanik ve mikroyapısal özellikleri. Mühendis ve Makina, 46 (541); 40-51
• [4]. Hooda, A., Dhingra, A., & Sharma, S. (2012). Optimization of MIG welding process parameters to predict maximum yield strength in AISI 1040. International journal of Mechanical engineering and Robotics research, 1(3); 203-213.
• [5]Praveen, P., & Yarlagadda, P. K. D. V. (2005). Meeting challenges in welding of aluminum alloys through pulse gas metal arc welding. Journal of Materials Processing Technology, 164; 1106-1112.
• [6]Mishra, B., Panda, R. R., & Mohanta, D. K. (2014). Metal Inert Gas (MIG) welding parameters optimization. International Journal of Multidisciplinary and Current Research, 2(1); 637-639.
• [7] Olson, D. L., Dixon, R. D., & Liby, A. L. (Eds.). (2012). Welding: theory and practice. Elsevier.
• [8] Wang, J., Feng, J. C., & Wang, Y. X. (2008). Microstructure of Al–Mg dissimilar weld made by cold metal transfer MIG welding. Materials Science and Technology, 24(7); 827-831.
• [9] Çevik, B., & Koç, M. J. K. M. (2019). The effects of welding speed on the microstructure and mechanical properties of marine-grade aluminium (AA5754) alloy joined using MIG welding. Metallic Materials/Kovové Materiály, 57(5).
• [10] Bhatt, D. A., & Mehta, H. R. (2015). Analyzing Effects of Weld Parameters for Increasing the Strength of Welded Joint on Mild Steel Material by Using the MIG Welding Process. Dimension, 300(300mm), 10mm.
• [11] Himarosa, R. A., Rahman, M. B. N., Adi, R. K., Putra, L. A., & Nugroho, S. W. (2022). Effect of MIG Welding Speed Butt-Joint on Physical and Mechanical Properties of Materials AA 5083. Materials Today: Proceedings, 66, 3101-3106.
• [12] EDITION, F. Arc Welding of Nonferrous Metals, Pg 16.
• [13] Meseguer-Valdenebro, J. L., Martínez-Conesa, E., & Portoles, A. (2022). Influence of welding parameters on grain size, HAZ and degree of dilution of 6063-T5 alloy: optimization through the Taguchi method of the GMAW process. The International Journal of Advanced Manufacturing Technology, 120(9-10); 6515-6529.
• [14] Atabaki, M. M., Yazdian, N., & Kovacevic, R. (2016). Partial penetration laser-based welding of aluminum alloy (AA 5083-H32). Optik, 127(16); 6782-6804.