AN ANALYSIS OF ELECTRO-MELTING AND HOT ELEMENT WELDING METHODS’ SAFETY USED TO JOIN PE NATURAL GAS PIPES

Abstract

Use of natural gas as an eco-friendly and user-friendly fuel increases day by day, in parallel to developments in industry and need for comfort. The common use of natural gas arouses interest about gas transfer and joining of pipes in order to install gas pipe lines. In this study, two methods to join PE plastic pipes are compared: electro-melting welding and hot element (butt) welding methods. Tests are applied in order to measure the leaktightness and strength properties of the joined pipes in ambient conditions similar to actual working conditions. Results of the standardized tests are compared. Consequently, electro-melting welding is found to be the ideal method for pipes of certain diameters. However, for main transfer line pipes (of larger diameters), hot butt welding gave more successful results.

Keywords

• Plastic pipe welding, Electro-melting (Electrofusion), Hot butt welding, PE pipe welding, PE pipe welding safety

Kaynakça

1. Anık, S., Dikicioğlu, A., and Vural, M. “Termoplastik Malzemelerin Kaynağı”, Kaynak Tekniği Derneği, Yayın No. 2, İstanbul. Jim Craig, P. E. 2005. “QA Technology for
2. Polyethylene Butt Fusion Joints”, American Society for Trenchless Technology, McElroy Manufacturing, Inc. Florida. Ogorkiewicz RM., 1970. “Engineering Properties
3. Interscience, London. p .249 – 317. North of Thermoplastics”, Willey- GEV–ATB–2009. “Plastik Malzemeleri
4. Birleştirme Yöntemleri”, Gedik Eğitim Vakfı. ASTM D2657-97. 2002. “Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings”, Volume 8.04. American Society of
5. Testing and Materials. Baltimore. Jun, H. Y, Grimm RA. 1998, “Infrared welding of thermoplastics: Practical thermoplastics”, Proceedings of , Conference Proceedings, termoplastics”, Welding Journal, Vol. 83, No. , p. 45- 47. October. “Welding of
6. Steven A., Kocheny, S. A., and Miller, B., “Laser Welding: It’s Not Just for Metals Anymore”, Welding Journal, Vol. 88, No. 3, p. 30. “Fabricated Procedure”, Technical Bulletin: TB-0308
7. FF, FPR IDC and NIDC Fittings. Fusion Fitting Butt http:// www.akatherm.com/files/ Pressure/ Weld ing %20polyolefins.pdf. ASTM F1056-97. 2002. “Standard
8. Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings”, Volume 04. American Society of Testing and Materials. Baltimore. Plastics Pipe Institute Inc. 2009. “Recommended

9. Guidelines for PE Pipe Butt Fusion Joining Operators for Municipal and Industrial Projects”, TN-42/September 2009. Training
10. Runcev, D., Trpkovski. Lj., 2008. ”
11. Heated Tool Butt Welding Of PE Pipes”, 8 International Manufacturing Operations, p. 21- 25. Advanced Crawford S. L., Cumblidge S. E., Hall T. E., Anderson M. T., 2008. “Preliminary Assessment
12. Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion”, Prepared for the U.S. Nuclear Regulatory Commission under U.S. Department of Energy. on General Guidelines for the Heat Fusion of Unlike Polyethylene Pipes and Fittings, Report TN-13, Plastics Pipe Institute, Washington, DC. Arthur. E., 2006. “Inspection of
13. Fusion Joints in Plastic Pipe”, National Energy Technology Laboratory, February The Plastics Pipe Institute, Inc. 105 Decker Court, Suite 825, Irving, TX 75062 P: www.plasticpipe.org
14. TR-45/2008, Butt Fusion Joining
15. Procedure For Field Joining of Polyamide- , January 2008
16. Starostin N. P., Ammosova O. A., “Thermal Processes in Butt-Welding Polyethylene Pipe at Low Ambient Temperatures”, Research, Vol. 29, No. 1, p. 12–16. Engineering Arkema Inc. , 2004. “Optimization of
17. Parameters Influencing Butt Fusion Integrity in Polyamide 11 Pipe”, King of Prussia, 900 First Avenue, PA 19406
18. PE Jointing Technics, www.tega com.tr Messer, B., Yarmuch, M., Boer, P., “Novel High Resolution Defect Detection For Thermoplastic Butt-Welds”, Pipeline & Gas Journal, Services Inc. Vol. 230, p. 46, March, 2003 RTD Quality
19. Dong. H. N., 2005, “A Study of The Combined Socket anda Butt Welding of
20. Plastic Pipes Using Through Transmission İnfrared Welding”, Presented in Partial Fulfillment of the Requirement for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University Fujikake. M., Fukumura. M., Kitao. K., 1997. “Analysis of the electrofusion joining process in polyethylene gas piping systems”, Proceedings of the 11th ADINA Conference, September 1997, Pages 939-948 , Issues 6,
21. Jack. Q. Z., Lyne. D., Denis. B., 2002.
22. “Effect of joint contamination on the quality polyethylene Canadian Journal Civil Engineering 29(5): –798 high-density pipe joints”, Kaluç, E., Taban, E., 2005. “Doğalgaz
23. Boru Hatlarında Kullanılan Polietilen Boruların Kaynağı”, MakinaTek, Bileşim Yayıncılık, s. 118 - 124, İstanbul. html Alet_Listesi/MSA300.pdf Donoghue, P. E., Kanninen, M. F., Green, S. T. and Grigory, S. C. 1991,
24. “Results of a thermomechanical analysis model for EF joining of PE gas pipes”, In Proceedings of Twelfth Plastic Fuel Gas Pipe Symposium, p. 331–342, Boston. Polytubes Technical Note, 2007. “Butt POLYETHYLENE,
25. Polytubes Technical Bulletin. July 2007. Technical Note.
26. Takasu, N,. 2003. “Friction welding of plastics”, Selected from journal of the Japan
27. International” , 17(11), p.856, 2003. Welding
28. Barber P, Atkinson JR. 1994. “The use of tensile tests to determine the optimum conditions for butt fusion welding certain grades of polyethylene”, polybutene-1 and polypropylene pipes. J. of Materials science, p.1456.
29. M.G. Murch, M.J. Troughton, 1993.
30. “A Study of the Applicability of the Tensile Weld Test for Thick Walled Polyethylene Pipe”, TWI, p. 757. Murch, M.G., Troughton, M.J., 1993.
31. “A Study of the Applicability of the Tensile Weld Test for Thick Walled Polyethylene Pipe”, TWI, p. 757 Saint Royre, D., Gueugnaut, D. and Reveret, D. 1989. “Test meth - 1995. odology for the determination of optimum fusion
32. Manual”, Version 5.3, Hibbit, Karlsson conditions of PE. J. Appl. Polym. Sci., p.147–162 Theory Fischer. W., 1999. “Experts for Pipes and Engineering, Regensburg, Germany. Fischer