Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2018, Cilt: 8 Sayı: 3, 1589 - 1592, 10.07.2018

Öz

Kaynakça

  • [1] Male AT, Cockroft MG. “A method for the deformation of coefficient of friction of metals under bulk plastic deformation”. J Ins Met 1964– 1965;93:38–46. [2] Koboyashi S. “Deformation characteristics and ductile fracture at 1040 steel in simple upsetting of solid cylinders and rings”. ASME Paper 69-WA/Prod-14 1–8; 1970. [3] Lange K. “Handbook of metal forming”. USA: McGraw-Hill International Book Company; 1985. [4] Dieter GE. “Mechanical metallurgy. second ed”. Japan: McGraw-Hill International Book Company; 1984. [5] Sahin M, Cetinarslan CS, Akata HE; “Effect of Surface Roughness on Friction Coefficients During Upsetting Processes for Different Materials”, Materials & Design 28 (2): 633-640 2007 [6] Rajesh E, SivaPrakash M., “Analysis of friction factor by employing the ring compression test under different lubricants” International Journal of Scientific & Engineering Research, Volume 4, Issue 5, 1163-1170, May-2013 1163 ISSN 2229-5518

Evaluation of an Experimental Setup Developed For Measuring the Friction Coefficients

Yıl 2018, Cilt: 8 Sayı: 3, 1589 - 1592, 10.07.2018

Öz

Abstract - In the presented study, an experimental setup was developed in order to measure the friction coefficient and examine
the material flow during upsetting. A grid pattern was printed on the side and upper surfaces of ring shaped test specimen, and
photos of the final positions of the grids were taken for different upset ratios. Grid deformation views and the standard procedure
for friction coefficient determination were used in the analysis of the ring-compression test results. Two different test materials
were upset to different ratios in the tests and the friction coefficients for unlubricated conditions were determined. The friction
coefficients are harmonious with similar test results as expected. Variation in the grid dimensions with respect to deformation ratios
offer a better analysis for the ring deformations.

Kaynakça

  • [1] Male AT, Cockroft MG. “A method for the deformation of coefficient of friction of metals under bulk plastic deformation”. J Ins Met 1964– 1965;93:38–46. [2] Koboyashi S. “Deformation characteristics and ductile fracture at 1040 steel in simple upsetting of solid cylinders and rings”. ASME Paper 69-WA/Prod-14 1–8; 1970. [3] Lange K. “Handbook of metal forming”. USA: McGraw-Hill International Book Company; 1985. [4] Dieter GE. “Mechanical metallurgy. second ed”. Japan: McGraw-Hill International Book Company; 1984. [5] Sahin M, Cetinarslan CS, Akata HE; “Effect of Surface Roughness on Friction Coefficients During Upsetting Processes for Different Materials”, Materials & Design 28 (2): 633-640 2007 [6] Rajesh E, SivaPrakash M., “Analysis of friction factor by employing the ring compression test under different lubricants” International Journal of Scientific & Engineering Research, Volume 4, Issue 5, 1163-1170, May-2013 1163 ISSN 2229-5518
Toplam 1 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Makaleler
Yazarlar

Doğuhan Ufuk Işık Bu kişi benim

Hüseyin Erol Akata Bu kişi benim

Yayımlanma Tarihi 10 Temmuz 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 8 Sayı: 3

Kaynak Göster

APA Işık, D. U., & Akata, H. E. (2018). Evaluation of an Experimental Setup Developed For Measuring the Friction Coefficients. International Journal of Electronics Mechanical and Mechatronics Engineering, 8(3), 1589-1592.