Integrated assessment of irradiance and temperature effects on the electrical performance of contemporary photovoltaic technologies

Öz

This study presents a comprehensive performance assessment of a 10 kWp grid-connected photovoltaic (PV) system located in Kayseri, Türkiye focusing on the coupled effects of irradiance and temperature on electrical output characteristics. PVGIS-SARAH3 climatic data were employed to model long-term solar resource availability, while PSIM-based single-diode simulations were used to analyze the dynamic electrical and thermal behavior of different PV technologies under operating conditions ranging from 300-1000 W/m² irradiance and 10-90 °C cell temperature. The investigated modules include polycrystalline, monocrystalline, heterojunction (HJT), and advanced N-type TOPCon technologies. Results indicate that the highest conversion efficiency of 28.80% is achieved by the TOPCon module, whereas polycrystalline technology exhibits the lowest performance at 17.74%. Irradiance variation leads to a power increase of approximately 261%, while temperature rise causes up to 23–28% power degradation depending on module type. Voltage output remains relatively stable within 38-42 V, whereas current is highly sensitive to irradiance changes. Seasonal analysis reveals an annual energy yield of 16,272.70 kWh, with approximately 55% of production concentrated between May and September. The findings confirm that N-type and TOPCon technologies provide superior thermal stability and higher energy yield under high-irradiance climates. The proposed integrated PVGIS-PSIM framework offers a robust methodology for realistic PV system performance prediction and technology comparison under field-relevant environmental conditions.

Anahtar Kelimeler

• Photovoltaic module
• Solar panel
• Temperature effects
• Irradiance

Kaynakça

1. [1] De-Dios-Jiménez JP, Pérez-Hernández G, Torres Ricárdez R, Ramírez-Betancour R, et al. Three-dimensional transient thermal analysis of BIPV roof systems with passive cooling fins under real climatic conditions. Energies 2026; 19(9): 2056.
2. [2] Faheem M, Bakr MA, Ali M, Majeed MA, Haider ZM, Khan MO. Evaluation of efficiency enhancement in photovoltaic panels via integrated thermoelectric cooling and power generation. Energies 2024; 17(11): 2590.
3. [3] Yang C, Tao Q, Zheng J, Qiu L, Chen Y, Yan H, Min Y, Fan Y. Thermal evaluation of photovoltaic panels combined pulsating heat pipe with phase change materials: Numerical study and experimental validation. Energy and Buildings 2024; 303: 113806.
4. [4] Huang X, Alva G, Jia Y, Fang G, Liu X. Thermal regulation of photovoltaic panels using shape-stabilized phase change materials supported by exfoliated graphite/graphene nanofillers. Solar Energy Materials and Solar Cells 2020; 210: 110487.
5. [5] Kayabaşı R, Kaya M. Effect of module operating temperature on module efficiency in photovoltaic modules and recovery of photovoltaic module heat by thermoelectric effect. Journal of Thermal Engineering 2023; 9(1): 191-204.
6. [6] Abdelrahman MA, Elsaid AM, Ahmed MS, Ookawara S. Performance enhancement of photovoltaic panels using a hybrid phase change material and nanofluid cooling system: Experimental and numerical investigation. Applied Sciences 2026; 16(10): 5049.
7. [7] Hasanuzzaman M, Malek ABMA, Islam MM, Pandey AK, Rahim NA. Performance enhancement of solar photovoltaic cells using effective cooling methods: A review. Renewable and Sustainable Energy Reviews 2016; 64: 382-393.
8. [8] Skoplaki E, Palyvos JA. On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations. Solar Energy 2009; 83(5): 614-624.

9. [9] Akar MC, Demir M. Indoor experimental investigation of actively air cooled photovoltaic panel performance under low irradiance conditions. International Journal of Heat and Fluid Flow 2026; 119: 110301.
10. [10] Al-damook M, Qubeissi MA, Abid KW, Mumtaz A, Dixon-hardy D, Heggs PJ. Photovoltaic module efficiency evaluation: The case of Iraq. Alexandria Engineering Journal 2022; 61(9): 6701-6715.
11. [11] Odeh S, Behnia M. Improving photovoltaic module efficiency using water cooling. Heat Transfer Engineering 2009; 30(6): 499-505.
12. [12] Nishad S, Ahmad Z, Krupa I. Enhancement of photovoltaic module performance by thermal management using shape-stabilized PCM composites. Solar Energy Materials and Solar Cells 2024; 273: 112948.
13. [13] Faiman D. Assessing the outdoor operating temperature of photovoltaic modules. Progress in Photovoltaics: Research and Applications 2008; 16(4): 307-315.
14. [14] Forniés E, Cañizo CD, Méndez L, Souto A, Vázquez AP, Garrain D. UMG silicon for solar PV: From defects detection to PV module degradation. Solar Energy 2021; 220: 432-443.
15. [15] Kim T, Lee D, Ko Y, Hwang K, Kim N. Thermal analysis and design optimization of photovoltaic module for improved heat dissipation from photovoltaic module. IEEE Journal of Photovoltaics 2022; 12(5): 1162-1170.
16. [16] Wang YN, Lin TT, Leong JC, Hsu YT, Yeh CP, Lee PH, Tsai CH. Numerical investigation of high-concentration photovoltaic module heat dissipation. Renewable Energy 2013; 50: 20-26.
17. [17] Zhang X, Yuan S, Wang Z. Causes and prevention of photovoltaic module hot spot effect. Journal of Physics: Conference Series 2023; 2520(1): 012012.
18. [18] Marion B. Comparison of predictive models for photovoltaic module performance. 33rd IEEE Photovoltaic Specialists Conference, 2008; 1-6.
19. [19] Colvin DJ, Schneller EJ, Davis KO. Impact of interconnection failure on photovoltaic module performance. Progress in Photovoltaics: Research and Applications 2021; 29(5): 529-538.
20. [20] Peters IM, Buonassisi T. How changes in worldwide operating conditions affect solar cell performance. Solar Energy 2021; 220: 671-679.
21. [21] Macalpine SM, Wolfrom CW. Impact of photovoltaic module performance degradation rate on LCOE of utility scale systems. 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC), 2019; 1368-1371.
22. [22] Wang X, Barnett A. The evolving value of photovoltaic module efficiency. Applied Sciences 2019; 9(6): 1227.
23. [23] Gelis K, Al-Khatib OA, Ozbek K. Development of partitioned rectangular-shaped heat sink for photovoltaic thermal systems and performance evaluation using TiO₂/water-based nanofluids. Applied Thermal Engineering 2024; 248(Part A): 123220.
24. [24] European Commission Joint Research Centre. Photovoltaic Geographical Information System (PVGIS). [Database/Software]. 2026. [Online] Available at: https://pvgis.com/tr
25. [25] Kulkarni RS, Talange DB, Mate NV. Output estimation of solar photovoltaic (PV) system. 2018 International Symposium on Advanced Electrical and Communication Technologies (ISAECT). https://doi.org/10.1109/isaect.2018.8618858
26. [26] Martynov V, Ploskyi V, Sergeychuk O, Virchenko G, Usenko V, Tereschuk M. Improving efficiency energy systems-photovoltaic modules and solar collectors in construction. IEEE 3rd KhPI Week on Advanced Technology (KhPIWeek), 2022; 1-4. https://doi.org/10.1109/khpiweek57572.2022.9916463
27. [27] Shiyani T. Transparent Solar PV Panels. Solar Panels - Recent Advances and Future Prospects, 2023. https://doi.org/10.5772/intechopen.110062
28. [28] Messmer C, Tutsch L, Pingel S, Erath D, Schön J, Fell A, ..., Hermle M. Optimized front TCO and metal grid electrode for module‐integrated perovskite–silicon tandem solar cells. Progress in Photovoltaics: Research and Applications 2022; 30: 374-383.
29. [29] Huang G, Markides CN. Spectral-splitting hybrid PV-thermal (PV-T) solar collectors employing semi-transparent solar cells as optical filters. Energy Conversion and Management 2021; 114776.
30. [30] Öztürk M, Kayabaşı R. Güneş enerjisinin İç Anadolu bölgesinde kullanılabilirliği ve sistem analizi. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 2023; 12(4): 1351-1359.