Yazım Kuralları

Guide for Authors

The International Journal of Engineering Science and Application  operates an online submission and peer review system that allows authors to submit articles online and track their progress via a web interface. The International Journal of Engineering Science and Application  is published four times per year.

For online submissin click here

Click Here for Template for Accepted Papers

Click Here for Copyright form 

Author Guide to Add ORCID ID to Your Papers
IJESA is going to accept your submissions only if they were written in its own template. You can download this template from HERE. In our new paper template, ORCID IDs must be added in your papers for all of the authors. In Figure 1, you can see newly added ORCID ID icons next to author names.
Figure 1: ORCID ID information

You need to add your ORCID ID as a hyperlink that’s attached to given ORCID ID icon. If you want to add ORCID ID for any author, you can copy this icon and paste it next to any authors name.

To add your own ORCID ID please follow the instructions below.
1) Left click to the ORCID ID icon. After you left click it, you’ll see it as given below.


2) Then right click to the ORCID ID icon, select the “Edit Hyperlink” option in the popup menu.


3) Paste your own ORCID ID in the Address bar. Press OK to complete the process.


After the following steps, you should have successfuly add your own ORCID id to the submitted paper.

Ethic Responsibilities

The publication of an article in peer-reviewedInternational Journal of Engineering Science and Applicationis an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behaviour for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.

All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work.

Submission of an article implies that the work described has not been published previously that it is not under consideration for publication elsewhere. The submission should be approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder.

Upon acceptance of an article, authors will be asked to complete a “Copyright Form”. Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a “Copyright Form” form or a link to the online version of this agreement.

Author Rights

As a journal author, you retain rights for a large number of author uses, including use by your employing institute or company. These rights are retained and permitted without the need to obtain specific permission from International Journal of Engineering Science and Application. These include:

v The right to make copies (print or electronic) of the journal article for your own personal use, including for your own classroom teaching use;

v The right to make copies and distribute copies (including via e-mail) of the journal article to research colleagues, for personal use by such colleagues for scholarly purposes;

v The right to post a pre-print version of the journal article on Internet web sites including electronic pre-print servers, and to retain indefinitely such version on such servers or sites for scholarly purposes

v The right to post a revised personal version of the text of the final journal article on your personal or institutional web site or server for scholarly purposes

v The right to use the journal article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes .


Article Style

Authors must strictly follow the guide for authors, or their articles may be rejected without review. Editors reserve the right to adjust the style to certain standards of uniformity. Follow Title, Authors, Affiliations, Abstract, Keywords, Introduction, Materials and Methods, Theory/Calculation, Conclusions, Acknowledgements, References order when typing articles. The corresponding author should be identified with an asterisk and footnote. Collate acknowledgements in a separate section at the end of the article and do not include them on the title page, as a footnote to the title or otherwise.


Abstract and Keywords:

Enter an abstract of up to 250 words for all articles. This is a concise summary of the whole paper, not just the conclusions, and is understandable without reference to the rest of the paper. It should contain no citation to other published work. Include up to six keywords that describe your paper for indexing purposes.


Abbreviations and Acronyms:

Define abbreviations and acronyms the first time they are used in the text, even if they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title unless they are unavoidable.


Text Layout for Peer Review:

Use single column layout, double spacing and wide (3 cm) margins on white paper at the peer review stage. Ensure that each new paragraph is clearly indicated. Present tables and figure legends in the text where they are related and cited. Number all pages consecutively; use 12 pt font size and standard fonts; Times New Roman, Helvetica, or Courier is preferred.

Research Papers should not exceed 20 printed pages in two-column publishing format, including figures and tables.

Technical Notes and Letters should not exceed 2,000 words.

Reviews should not exceed 20 printed pages in two-column publishing format, including figures and tables.



Number equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). To make equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use an dash (–) rather than a hyphen for a minus sign. Use parentheses to avoid ambiguities in denominators. Punctuate equations with commas or periods when they are part of a sentence, as in

                              C = a + b                                                                                                                                         (1)

Symbols in your equation should be defined before the equation appears or immediately following. Use “Eq. (1)” or “equation (1),” while citing.


Figures and Tables:

All illustrations must be supplied at the correct resolution:

    * Black and white and colour photos - 300 dpi

    * Graphs, drawings, etc - 800 dpi preferred; 600 dpi minimum

    * Combinations of photos and drawings (black and white and color) - 500 dpi


Table captions should be written in the same format as figure captions; for example, “Table 1. Appearance styles.”. Tables should be referenced in the text unabbreviated as “Table 1.”



Please ensure that every reference cited in the text is also present in the reference list (and viceversa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. Citation of a reference as “in press” implies that the item has been accepted for publication. Number citations consecutively in square brackets [1]. Punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]. Use “Ref. [3]” or Reference [3]” at the beginning of a sentence:  “Reference [3] was …”. Give all authors’ names; use “et al.” if there are six authors or more. For papers published in translated journals, first give the English citation, then the original foreign-language citation.



                       [1]          J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford:Clarendon Press, 1892, pp.68-73.



                      [2]          Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interface”, IEEE Transl. J. Magn. Japan, vol. 2, pp. 740-741, August 1987.


                      [3]          I. Çolak,  E. Kabalci,  R. Bayindir, and  S. Sagiroglu, “The design and analysis of a 5-level cascaded voltage source inverter with low THD”, 2nd PowerEng Conference, Lisbon, pp. 575-580, 18-20 March 2009.



                      [4]          IEEE Standard 519-1992, Recommended practices and requirements for harmonic control in electrical power systems, The Institute of Electrical and Electronics Engineers, 1993.


Text Layout for Accepted Papers:

A4 page margins should be margins: top = 24 mm, bottom = 24 mm, side = 15 mm. Main text should be given in two column. The column width is 87mm (3.425 in). The space between the two columns is 6 mm (0.236 in). Paragraph indentation is 3.5 mm (0.137 in). Follow the type sizes specified in Table. Position figures and tables at the tops and bottoms of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns.  Figure captions should be centred below the figures; table captions should be centred above.  Avoid placing figures and tables before their first mention in the text.  Use the abbreviation “Fig. 1,” even at the beginning of a sentence.



Type size (pts.)






Authors’ affiliations, Section titles,references, tables, table names, first letters in table captions,figure captions, footnotes, text subscripts, and superscripts





Main text, equations, Authors’ names, a


Subheading (1.1.)


Paper title





Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is Microsoft Word document file format.
  3. Where available, URLs for the references have been provided with the last visited date.
  4. The text is double-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end. 

  5. All illustrations, figures, and tables are placed within the text at the appropriate points, rather than as separate files at the end. 

  6. All authors have been registered with affiliations and e-mails on the IJESA WEB system (https://dergipark.org.tr/tr/pub/ijesa).

  7. Names, affiliations and e-mails of all authors are given on the paper.

  8. IJESA Template for Peer Review Papers has been used as given at the link below.


  9. I will give the paper ID in all communications regarding my manuscript. Paper ID is given automatically by the system after submitting the paper

  10. Similarity rate of the submitted paper is below %20.
    NOTE: If your submitted paper's similarity rate is above %20, you'll be notified to modify your paper and re-submit in 7 days. If you don't re-submit it in 7 days, your application will be declined.



Copyright Notice


The undersigned hereby transfers the copyright of the submitted article to International Journal of Renewable Energy Research (the "IJESA"). The Author declares that the contribution and work is original, and he/she is authorized by all authors and/or grant-funding agency to sign the copyright form. Author hereby assigns all including but not limited to the rights to publish, distribute, reprints, translates, electronic and published derivates in various arrangements or any other versions in full or abridged forms to IJESA. IJESAholds the copyright of Article in its own name.


Author(s) retain all rights to use author copy in his/her educational activities, own websites, institutional and/or funder’s web sites by providing full citation to final version published in IJESA. The full citation is provided including Authors list, title of the article, volume and issue number, and page number or using a link to the article in IJESA web site. Author(s) have the right to transmit, print and share the first submitted copies with colleagues. Author(s) can use the final published article for his/her own professional positions, career or qualifications by citing to the IJRER publication.

Once the copyright form is signed, any changes about the author names or order of the authors listed above are not accepted by IJESA

ISSN 2548-1185
e-ISSN 2587-2176
Period: Quarterly
Founded: 2016
Publisher: Nisantasi University