Development of a Cassava Grating Machine

Öz

Developing of a cassava grating machine is presented. This is a great boost in the development of local content and reduction of wastage in cassava produce in Africa. The use of internal combustion engine in powering the cassava grating machine makes the study unique as it goes a long way in eliminating the undue stress involved manual grating of cassava tubers. The developed machine is made up of components such as hopper, pulley belts, grating unit, internal combustion engine and shaft. Scientific formulae were employed to aid the design of the cassava grating machine. A detailed graphical modeling was done to serve as a guide for the fabrication of the machine. The developed grating machine had a volumetric capacity of hopper to be 50272000 mm3. A power capacity of 1.715 KW was delivered to the solid shaft of 27.05 mm diameter to grate the peeled cassava tubers at a designed torque of 10.23 Nm.

Anahtar Kelimeler

• Cassava
• Grating
• Machine
• Design
• Internal combustion engine

Destekleyen Kurum

Auchi Polytechnic, Nigeria

Proje Numarası

1

Teşekkür

Thank you for your encouragement and support

Kaynakça

1. [1] O.J. Olukunle and O. M. Jimoh, “Comparative analysis and performance evaluation of Cassava peeling machines”, International research Journal of Engineering Science, Technology and Innovation, Vol. 1, No. 4, pp. 94-102, 2012.
2. [2] E.K. Orhorhoro, A. E. Ikpe and A. N. Ngbeneme, “Analysis of Continuous Cassava Peeling Machine for Domestic and Commercial Use in Nigeria”, Journal of the Nigerian Association of Mathematical Physics,Vol. 36, No. 2, pp. 443-448, 2016.
3. [3] O.R. Adetunji and A.H. Quadri, “Development of a Cassava Grating Machine”, Pacific Journal of Science and Technology, Vol. 1, No. 2, pp.120-129, 2016.
4. [4] B. H. Abdulkadir, “Design and Constructionof a cassava peeling machine”, IOSR Journal of Engineering, Vol. 2, No. 6, pp. 1-8, 2012.https://doi.org/10.9790/3021-02630108
5. [5] E. K. Orhorhoro, P. O. B. Ebunilo and E. G. Sadjere, “ Design of Bio-Waste Grinding Machine for Anaerobic Digestive System”, European Journal of Advances in Engineering and Technology, Vol.4, No.7, pp. 560-568, 2017.
6. [6] E. K. Orhorhoro and E. V. Atumah, “Development of a Cassava Peeling Machine”, North Asian International Research Journal of Sciences, Engineering and Information Technology, Vol. 3, No. 6, pp. 23-28, 2017.
7. [7] S.K. Bello, S. B. Lamidi and S. A. Oshinlaja, “Development of Cassava Grating Machine”, International Journal of Advances in Scientific Research and Engineering, Vol. 6, No. 10, pp.162-167, 2020.
8. [8] O. M. Akusu and J. Oluwayomi J., “Development of Dried Cassava Pellets Grinding Machine”, American Journal of Engineering Research, Vol. 7, No.3, pp. 46-55, 2018.

9. [9] B.N.G. Aliemeke, H. A. Okwudibe and O. G. Ehibor, Development of a Fatigue Strength Machine, Nigeria Journal of Technology, Vol. 41, No.2, pp. 256-262, 2022.
10. [10] R. S. Khurmi and J. K. Gupta, “Theory of Machines”, Fourteenth edition, Eurasia publishing Ltd, New Delhi, 2008.
11. [11] I. S. Oghenevwaire, D. U. Owuamanam and I. S. Anisha, “Development of a Motorized oil palm rotary digester”, American Journal of Engineering Research, Vol. 8, No. 12, pp. 195-205, 2019.
12. [12] R. S. Khurmi and J. K. Gupta, “Machine Design”, Revised edition, Eurasia publishing Ltd, New Delhi, 2014.
13. [13] P. C. Sharma and D. K. Aggarwal, “A Textbook of Machine design”, Twelveth edition, S. K. Kataria and sons Publisher, New Delhi, India, 2013.