Position Control Performance Improvement of DTC-SVM for an Induction Motor: Application to Photovoltaic Panel Position

Abstract

This paper deals with the adaptive sliding mode control DTC-SVM approach dedicated to the position control of photovoltaicpanels according to the maximum sunshine position to allow a high efficiency of photovoltaic systems. The paper is devoted tothe presentation of a comparison study between three DTC-SVM strategies applied to the position control of an induction motor:(i) a DTC-SVM strategy using PI controllers, (ii) a DTC-SVM strategy using PI controllers with a nonlinear compensator, and(iii) a DTC-SVM strategy using sliding mode controllers. Moreover, using estimations of machine parameters updated online, therobustness with respect to parameter variations of the induction motor is also tested. These performances are confirmed by simulationworks.

Keywords

• Induction motor;direct torque control;photovoltaic panels position control;space vector pulse width modulation;sliding mode control;torque ripples;parameter estimations.

Kaynakça

1. M. Depenbrock, U. Baader, G. Gierse, “Direct Self- Control (DSC) of Inverter-Fed Induction Machine: a Basis for Speed Control without Speed measurement”, IEEE Trans. on Power Electronics, vol. 3, no.4, pp. 420– , 1988.
2. O. Barambones, P. Alkorta and J. M. G. De Durana, “Sliding mode position control for real-time control of induction motors”, International Journal of Innovation Computing, Information and Control, vol. 9, no. 7, pp. –2754, 2013.
3. F. Ben Salem, A. Yangui and A. Masmoudi, “On the reduction of the commutation frequency in dtc : a comparative study”, European Trans. on Electrical Power Engineering (ETEP). vol. 15, no. 6, pp. 571–584, 2005.
4. H. I. Okumus and M. Aktas, “Adaptive Hysteresis Band Control for Constant Switching Frequency in Direct Torque Control of Induction Machine Drives”, Elec. Eng. & Comp. Sci., vol 18, no. 1, pp.59-69, 2010.
5. T. G. Habetler, F. Profumo, M. Pastorelli and L. M. Tolbert. “ Direct torque control of induction machines using space vector modulation”, IEEE Trans. On Industry Applications, vol. 28, no. 5, pp. 1045–1053,
6. C. Y. Chen,. Sliding Mode Controller deseign of Induction Motor Based on Space-Vector Pulsewidth Modulation Method. International Journal of Innovative Computing, Information and Control, vol.5, no.10, pp. 3614, 2009.
7. S. Belkacem, F. Naceri and R Abdessemed, “A Novel Robust Adaptive Control Algorithm and Application to DTC-SVM of AC Drives”, Serbian Journal Of Electrical Engineering, vol. 7, no.1, pp. 21-40, 2010.
8. S. A. Davari, E. Hasankhan, D.A. Khaburi, “A comparative study of DTC-SVM with three-level inverter and an improved predictive torque control using two-level inverter”, 2nd Power Electronics, Drive Systems and Technologies Conference, pp. 379 - 384, 17 February, 2011.

9. A. Joseline Metilda, R. Arunadevi, N. Ramesh and C. Sharmeela, “Analysis of direct torque control using space vector modulation for three phase induction motor”, Recent Research in Science and Technology, vol. 3, no7, pp. 37–40, 2011.
10. H. F. Rashag, S.P. Koh, K.H. Chong, S.K. Tiong, N. M.L. Tan and A. N. Abdalla, “High performance of space vector modulation direct torque control SVM- DTC based on amplitude voltage and stator flux angle”, Research Journal of Applied Sciences, Engineering and Technology, vol. 5, no. 15, pp. 3934–3940, 2013.
11. N. Ahammad, S. A. Khan and R. K. Reddy, “Novel DTC-SVM for an Adjustable Speed Sensorless Induction Motor Engineering and Advance Technology (IJSEAT), vol. 2, no.1, pp. 31–36, 2014. Journal of Science
12. B. Bouzidi, F. Ben Salem, A. Yangui and A. Masmoudi, “Direct Torque Control strategy Based Maximum Sunshine Position Tracking”, in CD-ROM Second International Conference and Exhibition on Ecological Vehicles and Renewable Energies, Monte Carlo, Monaco, 4-7 february, 2007. W.
13. Srirattanawichaikul, Y. Kumsuwan and S. Premrudeepreechacharn, “Reduction of torque ripple in direct torque control for induction motor drives using decoupled amplitude and angle of stator flux control”, ECTI Trans. On Electrical Engineering, Electronics, and Communications, vol. 8, no. 2, pp. 187–196, 2010.
14. A. Ouarda and F. Ben Salem, “Induction Machine DTC-SVM: A Comparison Between Two Approaches” IEEE 10th Int. Conf. on Systems, Signals and Devices (SSD’13), Hammamet, Tunisia, 18-21March, 2013.
15. F. Ben Salem and N. Derbel, “Direct torque control of induction motors based on discrete space vector modulation using adaptive sliding mode control” accepted for publication in the international journal of Electric Power Components and Systems, Mai 2014.
16. K. D. Young, V. I. Utkin, U. Ozguner, “A control engineer’s guide to sliding mode control”, IEEE Trans. Control Syst. Technol. Vol.7, no.3, pp. 328-342, 1999.
17. M. S. Carmelia, M. Maurib, “ Direct torque control as variable verification and analysis”, Electric Power Systems Research. Vol.81, pp. 1188–1196, 2011. conditions
18. F. Ben Salem and N. Derbe, “A Sliding Mode field Oriented Control of an Induction Machine Operating with Variable Parameters”, Journal of Power and Energy Systems, vol. 27, no.1, pp. 205-212, 2007.
19. F. Zidani and D. Diallo, “ Direct Torque Control of Induction Adaptation”, IEEE Trans. on energy converion, vol. 21, no. 2, pp. 619–621, 2006. Fuzzy Stator Resistance
20. B. Mouli Chandra and Dr S. Tara Kalyani, “FPGA Controlled Stator Resistance Estimation In IVC of IM using Engineering Electrical and Electronics Engineering, vol. , no. 13, Online ISSN:2249-4596& Print ISSN:0975- , 2013.