Comparison between Different DPC Methods Applied to DFIG Wind Turbines

Öz

In this paper the direct power control methods of doubly fed induction generator in wind turbine applications are studied. In the methods under study, the proper voltage space vector of the rotor side converter is selected using a switching table which is derived from flux position and the difference between the measured and reference stator active and reactive powers. Various simulations are performed in Matlab/Simulink software on a DFIG system in order to investigate the dynamic performance and robustness of the proposed control methods against machine internal parameters variations.

Anahtar Kelimeler

• Direct Power Control (DPC); Doubly Fed Induction Generator (DFIG); Rotor Side Converter (RSC); Space Vector; Wind Turbine

Kaynakça

1. L. Xu and W. Cheng, “Torque and reactive power control of a doubly fed induction machine by position sensorless scheme”, IEEE Trans. on industry applications, Vol. 31, No. 3, pp. 636-642, May/June 1995
2. N. P. Quang, A. Dittrich and A. Thieme, “Doubly fed induction machine as generator: Control algorithms with decoupling of torque and power factor”, Electrical Engineering 80 (1997), Springer- verlag 197, Vol. 80, No. 5, pp. 325-335, 1997
3. S. Peresada, A. Tilli and A.Tonielli, “Robust output feedback control of a doublyfed induction machine”, IEEE 25th annual conference on industrial electronics, Vol. 3, No. 1, pp. 1348-1354, November 1999
4. S. Muller, M. Deicke and R. W. De Doncker, “Doubly fed induction generator systems for wind turbines”, IEEE Industry Applications, vol. 17, No. 1, pp. 26-33, May/Jun 2002
5. Chia Chi Chu, Chia Chun Hung, Yuan Zheng Lin and ZenJey Guey, “Universal field oriented rotor side controllers for doubly fed induction generators”, International Conference on Power Electronics and Drive Systems, pp. 342-347, 2009
6. K. Gierlotka and M. Jelen, “Control of double-fed induction machine using DTC method”, in Proc. EDPE'03, pp476-481, September 2003, Slovakia
7. U. Baader, M. Depenbrock and G. Gierse, “Direct self control (DSC) of inverter-fed induction machine: A basis for speed control without speed measurement”, IEEE Trans. Industry Applications, Vol. 28, pp. 581-588, May/June 1992
8. Rajib Datta and V. T. Ranganathan, “Direct power control of grid connected wound rotor induction machine without rotor position Sensors”, IEEE Trans. Power Electronics, Vol. 16, No. 3, May 2001

9. Lie Xu and Phillip Cartwright, “Direct active and reactive power control of DFIG for wind energy generation”, IEEE Trans. Energy Conversion, Vol. 21, No. 3, Sep 2006