Investigation of Flow Mal-distribution in Proton Exchange Membrane Fuel Cell Stack

Yıl 2012, Cilt: 2 Sayı: 4, 652 - 656, 01.12.2012

Kanthabhabha Palaniappan R. Govindarasu R. Parthiban

https://izlik.org/JA62NE93FZ

Öz

During the operation of a fuel cell stack, a uniform distribution of reactants from the manifolds to each cell is desired.  An uneven flow distribution results in uneven performance between the cells. Though desired, it is difficult to achieve uniform distribution in practice and it is of interest to analyze the nature and magnitude of those undesirable deviations from ideality. In this research works, an attempt is made to experimentally investigate those deviations using pressure drop in a Proton Exchange Membrane Fuel Cell (PEMFC) stack at various stoichiometric flow rates. Fluctuations in pressure drop and effect of increase in number of cells and stochiometric of reactants are analyzed in this works. In addition the impact of flow patterns such as U-type and Z-type are also discussed here.

Anahtar Kelimeler

PEM Fuel Cell; Flow characterization; pressure drop; U-type and Z-type flow patterns

Kaynakça

• FranoBarbir, “PEM Fuel Cells: Theory and Practice”, Elsevier Academic Press, 2005.
• Joon-Ho Koh, Hai-Kyung Seo, Choong Gon Lee, Young-Sung Yoo, Hee Chun Lim, “Pressure and flow distribution in internal gas manifolds of a fuel-cell stack”, Jn. of Power Sources, Vol.115,54-65, 2003.
• S. Pandiyan, A. Elayaperumal, N. Rajalakshmi, K. S. Dhathathreyan, N. Venkateshwaran ,”Design and analysis of a proton exchange membrane fuel cells”,Jn of Renewable Energy Vol 49, 161-165, January 2013.
• Robert L. Pigford, Ashraf, Muhammad, Miron, Yvon D , “Flow distribution in piping manifolds”, Ind. Eng. Chem. Fundam.,Vol.22, 463-471, 1983.
• Li Xi Anguo,Sabir Imran., “Review of Bipolar Plates in PEM Fuel Cells: Flow-Field Designs”, Int. Jn. Hydrogen Energy, 30, 359 - 371, 2005.
• Wenzhong Cao, “Performance comparison of a fuel cell-battery hybrid power train and a fuel cell-ultra capacitor hybrid power train”, IEEE Trans. on Vehicular Technology, Vol.54, No.3,846-855, 2005.
• S.Um, C. Y.Wang, K. S. Chen, ,“ Computational fluid dynamics modeling of proton exchange membrane fuel cell”, Jn. of Electrochem. Soc., Vol. 147, 4485-4493,
• D. Singh , D.M. Lu, N. Djilali “A two-dimension analysis of mass transport in proton exchange membrane fuel cells”, Int. Jn. Eng. Sci., Vol. 37, 431-452, 1999.
• Junye Wang, “Flow distribution and pressure drop different in arrangement”. Energy science and technology, Vol. 2, No. 2, 1-12, 2011. configurations with z-type
• Paul A.C. Changa, “Flow distribution in PEM fuel cell stacks”, Jn. of Power Sources, Vol.162, 340-355, D.Spernjak, A. K. Prasad, S. G. Advani., “Experimental Investigation of Liquid Water Formation and Transport in a Transparent Single- Serpentine PEM Fuel Cell,” Jn. Power Sources, 2, 334-344,2007.
• J.Y.Wang, “Theory of Flow Distribution in Manifolds”, Chemical Engineering Jn, Vol 168, 1331- , 2011.
• Suman Basu, “Two-Phase Flow mal distribution and Mitigation in Polymer Electrolyte Fuel Cells”, Journal of Fuel Cell Science and Technology, Vol. 6 /1,2009.
• J.Y.Wang, “Pressure Drop and Flow Distribution in Parallel-Channel of Configurations of Fuel Cell Stacks: U-Type Arrangement”, Int. Jn. of Hydrogen Energy, Vol (21), 6339-6350, 2008.
• J.Y.Wang, ”Pressure Drop and Flow Distribution in Parallel-Channel of Configurations of Fuel Cell Stacks: Z-Type Arrangement ”, Int. Jn. of Hydrogen Energy, Vol , 5498-550, 2010.
• X.Li, I.Sabir, J.Park,“A Flow Channel Design Procedure for PEM Fuel Cells With Effective Water Removal,” Jn. Power Sources, Vol 163,2, 933-942, 2007. John Bachman, Maxime Charvet, Anthony
• Santamaria, Hong-Yue Tang, Jae Wan Park, Ronald , “Experimental investigation of the effect of channel length on performance and water accumulation in a PEMFC parallel flow field”, International Journal of Hydrogen Energy,In Press, Corrected Proof , September