Fuel Cell Integrated with Five Level VSI for Industrial Pump Applications

Yıl 2013, Cilt: 3 Sayı: 2, 388 - 394, 01.06.2013

Ajay Kumar Maurya Yogesh K Chauhan Raghvendra Kumar Mishra

Öz

This paper investigates and analyzes a Solid Oxide Fuel Cell (SOFC) connected three-phase five level voltage source inverter (VSI) supplying induction motor driven industrial pump systems. The neutral point clamped (NPC) topology is used for multilevel VSI and phase disposition switching frequency optimal pulse width modulation (PD-SFO PWM) technique is proposed for producing three-phase five level ac  voltages. The output of VSI is used to drive three-phase induction motor driving a pump load system. Extensive studies have been carried out on the proposed novel system. The harmonic analysis of the proposed multilevel VSI output is also evaluated to assess the power quality. The proposed model is implemented in MATLAB/SIMULINK environment to obtain the results under different operating conditions, which thereby validates the proposed system model.

Anahtar Kelimeler

Five level inverter; Induction motor drive; PD-SFO PWM; Pump load; Solid Oxide Fuel Cell (SOFC)

Kaynakça

• Jingang Han, J.F. Charpentier, Tianhao Tang “State of the art of fuel cells for ship applications” Industrial Electronics (ISIE), IEEE International Symposium, pp: 1461, 28-31 May 2012
• Caisheng Wang, “A physically based dynamic model for solid oxide fuel cells” IEEE Tran. On Energy Conversion, DOI: 10.1109/TEC.2007.895468, Vol. 22, no. 4, pp. 887-897
• Jeferson M. Corrêa, Felix A. Farret, Jonas R. Gomes, Marcelo Godoy Simões, “Simulation of fuel-cell stacks using a computer-controlled power rectifier with the purposes of actual high-power injection applications” IEEE 1109/TIA.2003.814548, Vol. 39, no. 4, pp. 1136-1142 Applications, DOI:
• C.A. Forbes, J.F. Pierre, “The solid fuel-cell future” Spectrum, IEEE Vol. 30, no.10, pp. 40 - 44, Oct. 1993.
• A. Wheeler “Pumps and pumping: what the industry wants from pump manufacturers” the international journal of mine water, Vol.7, No.2, pp.1-6, June 1988.
• Yu. M. In’kov, V. V. Litovchenko, and A. V. Nevinskii “Multilevel Invertors of Traction Motors” Russian Electrical Engineering, Volume 82, Issue 8, pp 399-404, August 2011.
• L. M. Tolbert, F. Z. Peng, T. G. Habetler, "Multilevel converters Applications, 1109/28.740843, vol. 35, no.1 ,pp. 36-44, 1999. Transactions IEEE on, DOI:
• Ilhami Colak, Ersan Kabalci, Ramazan Bayindir” Review of multilevel voltage source inverter topologies and control schemes” Energy Conversion and Management, Vol. 52, no. 2, , pp. 1114-1128, February 2011
• J. Rodriguez, J.-S. Lai, and F. Z. Peng, "Multilevel inverters: a survey of topologies, controls, and applications," Electronics, DOI: 10.1109/TIE.2002.801052, vol. 49, no.4, pp. 724-738. Transactions on Industrial
• D. Patel, R. Saravanakumar, K.K. Ray, R. Ramesh, "A Review of Various Carrier based PWM Methods for Multilevel Inverter", Power Electronics (IICPE), 2010
• India International Conference ,pp,1-6, Jan. 2011.
• N.F. Mailah, S.S.T. Othman, I. Aris, M. Norhisam, M.Z.A. Hiroaki,”Harmonics reduction of three phase five-level Neutral-Point-Clamped International Conference on Power and Energy (PECon) , Page(s): 13 - 17, 2-5 Dec 2012. H. Tsuyoshi, Y.
• Multilevel Inverter” IEEE J.L. Davies, M. Malengret , “Application of induction motor for solar water pumping” , AFRICON '92 Proceedings., 3rd AFRICON Conference, pp. 209 - , 1992
• B. Savitha, A. PriyaaGomathi, R. Seyezhai “Design and simulation of five level multistring inverter for fuel cell applications” Interational Conference on Computing, Electronics and Electrical Technologies [ICCEET], pp.472-476, 21-22 Mar 2012.
• C. A. García, F. Llorens, P. García, L. M. Fernández, F. Jurado “Voltage harmonic compensation control for a stand-alone single phase inverter-based fuel cell” Electronics,Electrical Drives, Automation and Motion, pp. 379-383, 20-22 Jun 2012 on Power
• R. Bojoi, A. Tenconi, F. Farina, F. Profumo “Dual- source fed multi-phase induction motor drive for fuel cell vehicles: topology and control” 2005 IEEE 36th Power
• Electronics Specialists Conference, pp.2676-2683, 16-16 Jun 2005.
• Y. Zhu, K. Tomsovic “Development of models for analyzing the microturbines and fuel cells” Electric Power Systems Research, Vol. 62, no. 1 ,pp.1-11, 28 May 2002, of
• J. Padulles, G.W. Ault, J.R. McDonald “An integrated SOFC plant dynamic model for power systems simulation” Journal of Power Sources, Vol. 86, no. 1-2, March 2000, Pages 495-500
• Y. Zhu, Kevin L. Tomsovic, “Analysis and Control of Distributed Energy Resources” IEEE Power and Energy Society General Meeting, pp.1-6, 24-29 July Yosuke Komatsu, Kenji Otsuka, Atsushi Kurosaki, Chosei Kaseda, Shinji Kimijima “Development of an SOFC Dynamic Simulation Environment: Model Extension for Adopting Heat Loss Analysis” Proceeding of SICE Annual Conference, pp.1081-1090, 20-23 Aug.
• A. Nabae, I. Takahashi, H. Agaki, "A New Neutral- Point-Clamped PWM, Inverter," IEEE Transactions on Industry Applications, DOI: 10.1109/TIA.1981.4503992, Vol. IA-17, no.5, pp.518-523.
• Palanivel, P.; Dash, S.S. “Analysis of THD and output voltage performance for cascaded multilevel inverter using carrier pulse width modulation techniques” Power pel.2010.0332, Vol. 4, no. 8 pp. 951 - 958. IET ,DOI: 1049/iet- www.sealing.com/fileadmin/docs/Pump_Principles_ Manual.pdf