Abstract─ In this paper, the MPPT (Maximum Power Point Tracking) with DC submersible solar pump is implemented in MATLAB with output sensing direct control method using Cuk converter. The simulated system consists of the BP SX 150S photovoltaic (PV) module, the ideal Cuk converter, the MPPT control, and the dc submersible solar pump. The selection of the purturb & observe (P&O) algorithm permits the use of output sensing direct control method which eliminates the input voltage and current sensors. The direct control method adjusts of duty cycle within the MPP tracking algorithm. The way to adjust the duty cycle is totally based on the theory of load matching. When the value of Rload (Load of DC submersible pump) matches with that of Ropt, the maximum power transfer from PV to the load will occur. These two are, however, independent and rarely matches in practice. The goal of the MPPT is to match the impedance of load to the optimal impedance of PV.
Keywords─ P&O algorithm MPPT Cuk converter PV module direct control method DC submersible solar pump
Birincil Dil | İngilizce |
---|---|
Bölüm | Articles |
Yazarlar | |
Yayımlanma Tarihi | 1 Mart 2013 |
Yayımlandığı Sayı | Yıl 2013 Cilt: 3 Sayı: 1 |