BibTex RIS Kaynak Göster

Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill

Yıl 2012, Cilt: 2 Sayı: 4, 640 - 644, 01.12.2012

Öz

In India the average per capita electricity consumption for domestic utilities is from 1-1.5kWhrs, which means a small wind mill of 1 kWp is reasonably sufficient to cope up with every day need of a family. This paper has dealt with design, manufacturing and performance testing of aerodynamic rotor blade for 1kWp small wind machine. It is observed that the small wind mills available in this range are not indigenous and are designed for higher rated wind speeds. A new design methodology was established for indigenous development of small wind machine technology, which considers aerodynamic rotor blade design for rotor blade performance and finite element design practices for strength of rotor blades. This has facilitated to consider the cut in speed from 2m/s onwards, rated speed 11-14m/s and cut out speed of 25m/s. The FRP/ERP rotor blades having light weight and highest strength to weight ratio was selected and has fulfilled the conditions of low initial torque for lower cut in speeds. The power curves obtained by testing wind machines by IEC 61400-121 methods shows improved performance over market similar capacity wind machines.

Kaynakça

  • Paul Gipe Califonia, USA www.wind-works.org S.P.Patil-Mechanical publications.(2009) System Design- Jaico
  • V. B. Bhandari- Design of Machine Elements- Tata Mcgraw Hill publications. (2009)
  • S.M.Habali, I.A.Saleh - Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics Part-I-International Journal www.elsevier.com (2005) and Management
  • D.M.Somers- The S822 and S823 Airfoils- Report by National Renewable Energy Laboratory Colorado (2005)
  • Tony Burton, David Sharpe, Nick Jenkins, Ervin Bossanyi- Willey publications-Wind Energy Handbook, ( 2004)
  • Dr.S.P.Sukhatme- Solar energy- Tata Mcgraw Hill publications (2009)
  • Dr.R.K.Bansal - Fluid Mechanics and Hydraulic Machines - Laxmi publications ( 2009)
  • Ron Stimmel A Guide for State and Local Governments In the Public Interest How and Why to permit for Small Wind Systems-American Wind Energy Association September 2008,
  • Wind Energy Integration in the Urban Environment by Weinuer 2007
  • Mr. Josua Kirsch-Design of a small wind turbine for electric power generation November 2009
  • Paul Gipe A Guide to Small and Micro Wind Systems - Wind Energy Basics Erich Hau - Wind Turbines- Tata Mcgraw Hill publications Luis Arribas de Paz, Félix Avia, Luis Cano, Ignacio Cruz, and Enrique Soria - Power Performance Testing of Small Wind Turbines: Experiences and findings obtained testing the Bornay1500 Inclin Neo Wind Turbine.
  • Department of Renewable Energies CIEMAT D.E.Warne- Wind Power Equipment - E. & F.N. Spon Ltd. New York.(1983)
  • Small Wind Turbine Testing Results from the National Renewable Energy Lab A. Bowen, A. Huskey, H. Link, K. Sinclair, T. Forsyth, and D. Jager National Renewable Energy Laboratory J. van Dam and J. Smith Windward Engineering. Power Performance Testing IEC 61400-12-1 stedition NWTC Joe Smith 20 October 2009.
Yıl 2012, Cilt: 2 Sayı: 4, 640 - 644, 01.12.2012

Öz

Kaynakça

  • Paul Gipe Califonia, USA www.wind-works.org S.P.Patil-Mechanical publications.(2009) System Design- Jaico
  • V. B. Bhandari- Design of Machine Elements- Tata Mcgraw Hill publications. (2009)
  • S.M.Habali, I.A.Saleh - Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics Part-I-International Journal www.elsevier.com (2005) and Management
  • D.M.Somers- The S822 and S823 Airfoils- Report by National Renewable Energy Laboratory Colorado (2005)
  • Tony Burton, David Sharpe, Nick Jenkins, Ervin Bossanyi- Willey publications-Wind Energy Handbook, ( 2004)
  • Dr.S.P.Sukhatme- Solar energy- Tata Mcgraw Hill publications (2009)
  • Dr.R.K.Bansal - Fluid Mechanics and Hydraulic Machines - Laxmi publications ( 2009)
  • Ron Stimmel A Guide for State and Local Governments In the Public Interest How and Why to permit for Small Wind Systems-American Wind Energy Association September 2008,
  • Wind Energy Integration in the Urban Environment by Weinuer 2007
  • Mr. Josua Kirsch-Design of a small wind turbine for electric power generation November 2009
  • Paul Gipe A Guide to Small and Micro Wind Systems - Wind Energy Basics Erich Hau - Wind Turbines- Tata Mcgraw Hill publications Luis Arribas de Paz, Félix Avia, Luis Cano, Ignacio Cruz, and Enrique Soria - Power Performance Testing of Small Wind Turbines: Experiences and findings obtained testing the Bornay1500 Inclin Neo Wind Turbine.
  • Department of Renewable Energies CIEMAT D.E.Warne- Wind Power Equipment - E. & F.N. Spon Ltd. New York.(1983)
  • Small Wind Turbine Testing Results from the National Renewable Energy Lab A. Bowen, A. Huskey, H. Link, K. Sinclair, T. Forsyth, and D. Jager National Renewable Energy Laboratory J. van Dam and J. Smith Windward Engineering. Power Performance Testing IEC 61400-12-1 stedition NWTC Joe Smith 20 October 2009.
Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Articles
Yazarlar

Mahesh Wagh Bu kişi benim

M. M. Wagh Bu kişi benim

Nilkanth N. Shinde Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2012
Yayımlandığı Sayı Yıl 2012 Cilt: 2 Sayı: 4

Kaynak Göster

APA Wagh, M., Wagh, M. M., & Shinde, N. N. (2012). Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill. International Journal Of Renewable Energy Research, 2(4), 640-644.
AMA Wagh M, Wagh MM, Shinde NN. Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill. International Journal Of Renewable Energy Research. Aralık 2012;2(4):640-644.
Chicago Wagh, Mahesh, M. M. Wagh, ve Nilkanth N. Shinde. “Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill”. International Journal Of Renewable Energy Research 2, sy. 4 (Aralık 2012): 640-44.
EndNote Wagh M, Wagh MM, Shinde NN (01 Aralık 2012) Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill. International Journal Of Renewable Energy Research 2 4 640–644.
IEEE M. Wagh, M. M. Wagh, ve N. N. Shinde, “Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill”, International Journal Of Renewable Energy Research, c. 2, sy. 4, ss. 640–644, 2012.
ISNAD Wagh, Mahesh vd. “Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill”. International Journal Of Renewable Energy Research 2/4 (Aralık 2012), 640-644.
JAMA Wagh M, Wagh MM, Shinde NN. Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill. International Journal Of Renewable Energy Research. 2012;2:640–644.
MLA Wagh, Mahesh vd. “Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill”. International Journal Of Renewable Energy Research, c. 2, sy. 4, 2012, ss. 640-4.
Vancouver Wagh M, Wagh MM, Shinde NN. Design, Development, Manufacturing and Testing of Aerofoil Blades for Small Wind Mill. International Journal Of Renewable Energy Research. 2012;2(4):640-4.