Solar Tilt Measurement of Array for Building Application and Error Analysis

Yıl 2012, Cilt: 2 Sayı: 4, 781 - 789, 01.12.2012

Abhishek Agarwal Vineet Kumar Vashishtha S. N. Mishra

Öz

Abstract The optimum angle show some variations when compared with values reported in the literature. The amount of solar radiation incident on a tilted module surface is the component of the incident solar radiation which is perpendicular to the module surface. The array’s tilt is the angle in degrees from horizontal. A flat roof has 0 degree tilt and a vertical wall mount has a 90 degrees tilt angle. Whether you are installing solar panel on a flat roof or a pitched roof, the output of the solar PV system would be increased by optimizing the tilt angle. This paper gives the information about the theoretical aspects of choosing a tilt angle for the solar flat-plate collectors used at different locations in India. So the calculations are based upon the measured values of monthly mean daily global and diffuse solar radiation on a horizontal surface. It is shown that nearly optimal energy can be collected if the angle of tilt is varied seasonally, four times a year. Annual optimum tilt angle is found to be approximately equal to latitude of the location. This study determined that PV module oriented towards the South gives the greatest value of electrical energy for the angle of 300.

Anahtar Kelimeler

Keywords: optimum tilt angle, PV system performance, solar radiation, solar collector; Clearness index, optimal tilt angle

Kaynakça

• D. Ibrahim, Optimum tilt angle for solar collectors used in Cyprus, Renewable Energy 6, 7 (1995) 813−19.
• N. M. Pearsall and R. Hill, Photovoltaic modules, systems and applications, Ch 15 edMA3.doc (2001).
• Chen, Y. M., Lee, C. H., and Wu, H. C. 2005.
• Calculation of the optimum installation angle for fixed solar-cell panels based on the genetic algorithm and the Simulated-annealing method. IEEE Transactions on Energy Conversion, 20, 2: 467-473. Tian Pau Chang, Study on the Optimal Tilt Angle of Solar Collector according to Different Radiation Types, International Journal of Applied Science and Engineering 6, 2: 151-161
• Ahmad M. Jamil and Tiwari G.N., Optimization of Tilt Angle for Solar Collector to Receive Maximum Radiation‖, The Open Renewable Energy Journal, 2009; : 19-24.
• Mubiru J. and Banda E.J.K.B., ―Estimation of monthly average daily global solar irradiation using artificial neural networks‖, Solar Energy, 2008; 82: 181 - 187.
• Widén, Joakim. “Distributed Photovoltaic in the swedich energy systems”. The Faculty of Science and Technology, Uppsala University , Uppsala, Sweden, Duffie J. A. and Beckman W. A., “Solar Engineering of Thermal Processes”, John Wiley & Sons Inc,1991.
• Calabrò, Emanuele. “Determining optimum tilt angles of photovoltaic panels at typical north-tropical latitude,” Journal of Renewable and Sustainable Energy Messina, Italy, 2009. 033104/6.
• Huan-Liang Tsai, Ci-Siang Tu, and YiJie Su. Development of Generalized Photovoltaic Model Using MATLAB/SIMULINK,‖Proceeding Congress on Engineering and Computer Science, San Frasesco, USA, 2008. 978-988-98671-0-2. the World
• Hay, J.E. “Study of shortwave radiation on non- horizontal surfaces”, Report No. 79-12, Canadian Climate Centre, Ontario, 1979.
• Liu B.Y.H. and Jordan R.C., “Availability of solar energy for flat plate solar heat collectors”, In: Liu, B.Y.H., Jordan, R.C. (Eds.) Application of Solar Energy for Heating and Cooling of Buildings. ASHRAE, Atlanta, H. C. Hottel, Performance of flat-plate energy collectors. In: Space Heating with Solar Energy, Proc. Course Symp. Cambridge: MIT Press, 1954.
• Gong X. and Kulkarni M., “Design optimization of a large scale rooftop photovoltaic system”, Solar Energy, ; 78:362 374. Gong X. and Kulkarni M., “Design optimization of a large scale rooftop photovoltaic system”, Solar Energy, 2005; 78:362-374.
• Yakup M.A.B.H.M. and Malik A.Q. “Optimum tilt angle and orientation for solar collector in Brunei Darussalum”, Renewable Energy, 2001; 24:223-234.
• J. Kern and L. Harris, On the optimum tilt of a solar collector. Solar Energy (1975) 17.97.
• H. Hyewood, Operating experience with solar water heating. Journal of the Institution of Heating and Ventilation Engineers 39 (1971) 63−9.
• H. Yellott, Utilization of sun and sky radiationfor heating cooling of buildings. ASHRAE Journal 15 (1973)
• Nakamura, H., Yamada, T., Sugiura, T., Sakuta, K., Kurokawa, K., 2001. Data analysis on solar irradiance and performance characteristics of solar modules with a test facility of various tilted angles and directions. Solar
• Energy Materials & Solar Cells 67, 591-600. Pissulla, D., Seckmeyer, G., Cordero, R.R., Blumthaler, M., Schallhart, B., Webb, A., Kift, R., Smedley, A., Bais, A.F., Kouremeti, N.,Herman, A.C.J., Kowalewski, M., 2009. Comparison of different calibration methods to derive spectral radiance as a function of incident and azimuth angle. Photochemical
• Photobiological Sciences 8, 516-527. Gunerhan, H., Hepbasli, A., 2007. Determination of the optimum tilt angle of solar collectors for building applications. Building and Environment 42, 779-783.