Comparative Performance Evaluation of a High Grade Low Heat Rejection Diesel Engine With Carbureted Alcohol and Crude Jatropha Oil

Yıl 2012, Cilt: 2 Sayı: 3, 516 - 527, 01.09.2012

Venkata Krishna Murthy M.V.S. Murali Krishna T.K. K. Reddy P.V. K. Murthy

Öz

Aim: Investigations were carried out to evaluate the performance of a low heat rejection (LHR) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown, air gap insulated liner with superni insert and ceramic coated cylinder head with normal temperature condition of jatropha oil and carbureted alcohol (ethanol and methanol) with varied injection timing and injection pressure and compared with methanol operation over ethanol operation. Study Design: Performance parameters were determined at various values of bake mean effective pressure (BMEP) with varied injection timing and injection pressure. Methodology: Pollution levels of smoke and oxides of nitrogen (NOx) were recorded at different values of BMEP. Aldehydes were measured by dinitrophenyl hydrazine (DNPH) method. Combustion characteristics of the engine were measured with TDC (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package. Brief Results: Conventional engine (CE) and LHR engine showed improved performance at recommended injection timing of 27obTDC and recommend injection pressure of 190 bar, when compared with CE with pure diesel operation. Peak brake thermal efficiency increased by 21%, smoke levels decreased by 58% and NOx levels decreased by 47% with LHR engine at its optimum injection timing with maximum induction of methanol when compared with pure diesel operation on CE at manufacturer’s recommended injection timing.

Anahtar Kelimeler

Crude Vegetable Oil, Methanol, Ethanol, LHR engine, Performance, Emissions and Combustion Characteristics

Kaynakça

• Use of raw vegetable oil or animal fats in diesel engines. March, 2006, Engine Manufacturer’s Chicago. Association,
• Cummins, C. Lyle, Jr. (1993). Diesel's Engine, Volume 1:
• From Conception To 1918. Wilsonville, OR, USA: Carnot Press, ISBN, 978-0-917308-03-1
• Pramanik, K. (2003). Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine. Journal of Renewable Energy. 28(2), 239- 48.
• Forson, F.K., Oduro, E.K. and ammond-Donkoh, E. “Performance of jatropha oil blends in a diesel engine”. Renewable Energy, 29, 1135-1145, 2004.
• Pugazhvadivu, M. Jayachandran, K. ”Investigations on the performance and exhaust emissions of a diesel engine using preheated waste frying oil as fuel”, Renewable energy, 30(14), 2189-2202, 2005
• Mahanta, P., Mishra, S.C. and Kushwash, Y.S. “ An experimental study of pongamia pinnata oil as a diesel substitute fuel, Proceedings IMechE., Journal of Power and Energy, 220, Part-A, 803-808, 2006. Venkanna, B.K. and Venkatarama Reddy,C.
• “Performance, emission and combustion characteristics of DI diesel engine running on blends of honne oil/diesel fuel/kerosene”, International Journal of Agriculture and Biology Engineering, 4(3), 1-10, 2009.
• Misra, R.D., Murthy, M.S., “Straight vegetable oils usage in a compression ignition engine-A review”, Renewable and Sustainable Energy Reviews, 14, 3005-3013, 2010.
• Murali Krishna, M.V.S. “Performance evaluation of low heat rejection diesel engine with alternate fuels”, PhD Thesis, J. N. T. University, Hyderabad, 2004.
• Agarwal,A.K. , “Bio-fuels (alcohols and biodiesel) applications as fuel internal combustion engines”, International Journal Energy Combustion Science, 33, 271, 2006.
• Banapurmath, N.R., Tewari, P.G., Hosmath, R.S., “Performance and emission characteristics of direct injection compression ignition engine operated on honge, jatropha and sesame oil methyl ester”, Renewable energy, 33, 1982-1988, 2008. Journal of
• Devan, P.K. and Mahalakshmi, N.V., “Performance, emission and combustion compression ignition engine using methyl ester of paradise oil- eucalyptus oil blends”, Applied Energy, 86, 680, 2009. characteristics of a
• Shailendra Sinha, Kumar Agarwal , “Rice bran oil methyl ester fuelled medium-duty transportation engine: long-term durability and combustion investigations”, International Journal of Vehicle Design 50 (1), 248 - 270, Jindal, S., Nandwana, B.P., Rathore, N.S., Vashistha.V. ”Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatrophamethyl ester”, Applied Thermal Eng, 30, 442-448, 2010.
• Gupta, C.P. “Use of alcohols in diesel engine”, Transactions of Journal of Indian Institute of Engineers, pp: 199-212, ME-6. 1983..
• Samaga, B.S., Suresh Kumar, Y. and Venukumar, S. “A dual fuel stratified charge combustion system”, Proc. of VIII National Conference on I.C. Engines and Combustion, 30- F37,Trivandrum, 1983. Rao, Haragopala substitution of alcohols for diesel fuel”, Proceedings B. (1984), “Partial of Workshop on Perspective of Alcohol Fuel Utilization in I.C. Engines, Dehradun, I.I.P, pp: 3-38, 1984.
• Venkanan, B.K., Gangavathi, P.B. and Swati, B.W..” Alcohol fumigation close to the intake valve at increased injection pressure and with ignition improver enhances the performance and reduces emissions in a D.I. engine”, Proc. of the XV National Conference on I.C. Engines and Combustion, Chennai, 144-150, 1997.
• Parlak, A., Yasar, H., ldogan O. ”The effect of thermal barrier engine performance and exergy potential of the exhaust gas”, Energy Conversion and Management, 46(3), 489- , 2005.
• Ekrem, B., Tahsin, E., Muhammet, C. “Effects of thermal barrier coating on gas emissions and performance of a LHR engine with different injection timings and valve adjustments”, Journal of Energy Conversion and Management,47,1298-1310, 2006.
• Ciniviz, M., Hasimoglu, C., Sahin, F., Salman, M. S. “Impact of thermal barrier coating application on the performance and emissions of a turbocharged diesel engine”. Proceedings of The Institution of Mechanical Engineers Part D-Journal Of Automobile Eng,222 (D12), 2455, 2008.
• Hanbey Hazar.”Effects of bio-diesel on a low heat loss diesel engine”, Renewable Energy, 34, 1533-1537,
• Modi, A.J., Gosai, D.C. “Experimental study on thermal barrier coated diesel engine performance with blends of diesel and palm bio-diesel”, SAE International Journal of Fuels and Lubricants, 3 (2), 246-259, 2010. Rajendra Prasath, B.,
• Mohd.Shabir,F.“Analysis of combustion, performance and emission characteristics of low heat rejection engine using biodiesel”, International Journal of Thermal Sci, , 2483-2490, 2010. P. Tamilporai ,P.,
• MohamedMusthafa, M., Sivapirakasam, S.P. and Udayakumar.M “Comparative studies on fly ash coated low heat rejection diesel engine on emission characteristics fueled by rice bran and pongamia methyl ester and their blend with diesel”, Energy, 36(5). 2351, 2011. performance and
• Parker, D.A. and Dennison, G.M. “The development of an air gap insulated Piston, . SAE Paper No. 870652,
• Rama Mohan, K., Vara Prasad, C.M., Murali Krishna, M.V.S. “Performance of a low heat rejection diesel engine with air gap insulated piston,”, ASME Journal of Engineering for Gas Turbines (3), 530-540, 1999. and Power,
• Karthikeyan, S., Arunachalam, M., Srinivasan Rao, P. and Gopala Krishanan, K.V. “Performance of an alcohol, diesel oil dual-fuel engine with insulated engine parts”, Proc. of IX National Conference of I.C. Engines and Combustion, Indian Institute of Petroleum, Dehradun, 19-22, 1985.
• Jabez Dhinagar, S., Nagalingam, B. and Gopala Krishnan, K.V. “A comparative study of the performance of a low heat rejection engine with four different of insulation”, Proc. of IV International Conference on Small Engines and Fuels, Chang Mai, Thailand, 121-126, levels Krishna Murthy, P.V. “Studies on biodiesel with low heat rejection diesel engine”. PhD Thesis, J. N. T. University, Hyderabad, 2010.
• Murali Krishna, M.V.S., Vara Prasad, C.M. and Ramana Reddy, Ch. “Control of aldehyde emissions in the diesel engines with alcoholic fuels”, Indian Journal of Environmental Science & Engineering, 48 (1), 61-64, Murali Krishna, M.V.S. and Murthy, P.V.K.”Studies on exhaust emissions from low heat rejection diesel engine with carbureted ethanol and jatropha oil”, Ecology, Environment and Conservation, (2),263-268, 2008.
• Murali Krishna, M.V.S., Naga Sarada, S., Sudha Rani, G., Kalyani Radha, K. and Seshagiri Rao, V.V.R. “A comparative study on exhaust emissions of a low heat rejection diesel engine with two different levels of insulation with carbureted methanol and crude pongamia oil”, Pollution Research, 28(1), 93-96, 2009.
• Murali Krishna, M.V.S., Seshagiri Rao, V.V.R., Murthy, P.V.K. and Reddy, T.K.K..”Performance evaluation of low heat rejection diesel engine with carbureted ethanol and crude jatropha oil”, Indian Journal of Engineering and Material Sciences (CSIR), 18, 293- , 2011.
• Seshagiri Rao, V.V.R., Murali Krishna, M.V.S., Reddy, T.K.K. and Murthy, P.V.K. ”Performance evaluation of high grade low heat rejection diesel engine with carbureted methanol and crude jatropha oil”, International Journal of Advanced Engineering Sciences & Technologies (IJAEST), ISSN: 2230-7818, 10(2), 368- , 2011.