İçine bakır borular yerleştirilmiş vakumlu tüplü güneş enerjili hava ısıtıcısının termal performansı

Yıl 2026, Cilt: 46 Sayı: 1 , 156 - 166 , 01.05.2026

Veerakumar Adaikalasamy , Karthickmunisamy T Venkatramanan R Vijayan S Parthiban R Ram Kumar S Karthi K Hari Ganesh V

https://izlik.org/JA27RD82LG

Öz

Bu çalışmada bakır borulu kelebek vakumlu borulu güneş enerjili hava ısıtıcısının (BETSAH-CT) performansı araştırılmıştır. Deneysel analiz 10 ila 50 kg/saat arasında değişen hava akış hızlarında gerçekleştirilmiştir. CT konfigürasyonunun çıkış sıcaklığı, termal ve efektif verimlilikler, ısı kazancı ve basınç düşüşü üzerindeki etkisi incelenmiştir. BETSAH-CT, 10 kg/saat'te 110,1 °C'lik maksimum çıkış hava sıcaklığına ve 10 kg/saat'te 89,7 °C'lik ortalama sıcaklığa ulaşmıştır. En yüksek faydalı ısı kazancı 50 kg/saat'te 663,8 W olarak kaydedilmiştir. Termal verimlilik hava akış hızıyla artmış ve 50 kg/saat'te %54,2'lik bir anlık tepe verime ulaşmıştır. Basınç düşüşü ve pompalama gücü hususları hava akışının ideal sistem performans oranını ön plana çıkarmaktadır. Ekserji verimliliği eğilimleri güneş ışınımı eğilimlerine neredeyse benzerdir ve ekserji verimliliğinin en yüksek değerleri akış hızıyla azalmaktadır. Sonuçlar, BETSAH-CT tasarımının termal verimliliği ve ısı kazanımını iyileştirme avantajına sahip olduğunu ve bu sayede güneş enerjisiyle hava ısıtmada sürdürülebilir ve enerji açısından verimli bir çözüm olarak kullanılabileceğini göstermektedir.

Anahtar Kelimeler

Hava ısıtma sistemleri , güneş enerjili hava ısıtıcısı , bakır boru , termal performans

Thermal performance of an evacuated tube solar air heater inserted with copper tubes

https://izlik.org/JA27RD82LG

Öz

This study investigates the performance of butterfly evacuated tube solar air heater with copper tubes (BETSAH-CT). The experimental analysis was conducted in across varying air flow rates ranging from 10 to 50 kg/h. The effect of CT configuration on outlet temperature, thermal and effective efficiencies, heat gain and pressure drop was examined. The BETSAH-CT achieved a maximum outlet air temperature of 110.1 °C at 10 kg/h and an average temperature of 89.7 °C at 10 kg/h. The highest useful heat gain noted as 663.8 W at 50 kg/h. The thermal efficiency increased with air flow rate, reaching a peak instantaneous efficiency of 54.2% at 50 kg/h. The considerations of pressure drop and pumping power bring to the fore the ideal system performance rate of airflow. The trends of exergy efficiency are nearly similar to the trends of solar irradiance and the highest values of the exergy efficiency decreases with the flow rate. The results indicate that the BETSAH-CT design has the benefit of improving thermal efficiency and heat gain, which can be used as a sustainable and energy-efficient solution to solar-air heating.

Anahtar Kelimeler

Air heating systems , solar air heater , copper tube , thermal performance

Kaynakça

• Abdukarimov, B., Toxirov, M., Jamshidov, O., Mirzayev, S., 2023. Mathematical modelling of heat and hydraulic processes in a solar air heater with a concave air duct absorber. E3S Web of Conferences 452, 04007. https://doi.org/10.1051/e3sconf/202345204007
• Agarwal, A., 2024. Optimizing Efficiency of Solar Double- Pass Air Heater through Fluid Combination Approach. E3S Web of Conferences 547, 03026. https://doi.org/10.1051/e3sconf/202454703026
• Ahmadkhani, A., Sadeghi, G., Safarzadeh, H., 2021. An in depth evaluation of matrix, external upstream and downstream recycles on a double pass flat plate solar air heater efficacy. Thermal Science and Engineering Progress 21, 100789. https://doi.org/10.1016/j.tsep.2020.100789
• Amari, M., Ali, A., Pallathadka, H., AL-Zoubi, O.H., Kaur, H., Kaur, J., Kumar, A., Alzubaidi, L.H., Foladi, A., 2024. Performance study on a new solar air heater for space heating: A numerical and experimental study. AIP Advances 14. https://doi.org/10.1063/5.0243594
• Arunkumar, H.S., Vasudeva Karanth, K., Kumar, S., 2020. Review on the design modifications of a solar air heater for improvement in the thermal performance. Sustainable Energy Technologies and Assessments 39, 100685. https://doi.org/10.1016/j.seta.2020.100685
• Bhushan, B., Singh, R., 2010. A review on methodology of artificial roughness used in duct of solar air heaters. Energy 35, 202–212. https://doi.org/10.1016/j.energy.2009.09.010
• Boussouar, G., Rostane, B., Aliane, K., Ravi, D., Gęca, M.J., Gola, A., 2024. Study of the Thermal Performance of Solar Air Collectors with and without Perforated Baffles. Energies 17, 3812. https://doi.org/10.3390/en17153812
• Can, O.F., Celik, N., Ozgen, F., Kistak, C., Taskiran, A., 2024. Experimental and Numerical Analysis of the Solar Collector with Stainless Steel Scourers Added to the Absorber Surface. Applied Sciences 14, 2629. https://doi.org/10.3390/app14062629
• Chaudhari, M., Sharma, S.L., Debbarma, A., 2023. Exergetic performance analysis of solar air heater with inverted L-shape ribs as roughness element. Archives of Thermodynamics 241– 267. https://doi.org/10.24425/ather.2023.147546
• Dubey, M.K., Prakash, O., 2023. Effect of artificial coarseness on the performance of rectangular solar air heater duct: a comparative study. Archives of Thermodynamics 325–358. https://doi.org/10.24425/ather.2023.147549
• El Ferouali, H., Zoukit, A., Salhi, I., El Kilali, T., Doubabi, S., Abdenouri, N., 2018. Thermal efficiency and exergy enhancement of solar air heaters, comparative study and experimental investigation. Journal of Renewable and Sustainable Energy 10. https://doi.org/10.1063/1.5039306
• Ghildyal, A., Bisht, V.S., Bhandari, P., Thapliyal, S., Kaushik, S., Ranakoti, L., Bangari, R.S., Srivastav, A., Kanojia, N., Paul, A.R., 2024. A comparative numerical evaluation of solar air heater performance having W-contoured, taper-contoured and reverse taper-contoured turbulators. Archives of Thermodynamics 189– 196. https://doi.org/10.24425/ather.2024.152008
• Hachemi, A., 1995. Thermal performance enhancement of solar air heaters, by a fan-blown absorber plate with rectangular fins. International Journal of Energy Research 19, 567–577. https://doi.org/10.1002/er.4440190703
• Ibragimov, U.K., Khamraev, S.I., Shomuratova, S.M., Botirov, A.S., Sattorov, A.B., 2023. Review of methods for improving the thermal performance of solar air collectors with flat plates. BIO Web of Conferences 71, 01048. https://doi.org/10.1051/bioconf/20237101048
• Kabeel, A.E., Hamed, M.H., Omara, Z.M., Kandeal, A.W., 2017. Solar air heaters: Design configurations, improvement methods and applications – A detailed review. Renewable and Sustainable Energy Reviews 70, 1189–1206. https://doi.org/10.1016/j.rser.2016.12.021
• Kadir, H., 2000. Fe3O4/su ile Doldurulmuş Kanatlı Soğutucunun Termodinamik Tersinirlik Açısından Parametrik Analizi, Düzce Üniversitesi Teknik Bilimler Dergisi, 1(1),1–10.
• Karthickmunisamy, T., Veerakumar, A., Vijayan, S., Venkatramanan, R., 2025. Experimental investigation of an evacuated tube solar air heater with baffles and perforated twisted tapes for air heating applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089251368623
• Khimsuriya, Y.D., Patel, D.K., Patel, V., Paikra, A.S., Kaushik, L.K., 2024. Heat transfer enhancement in a solar air heater utilizing novel rotating spiral baffles. Journal of Renewable and Sustainable Energy 16. https://doi.org/10.1063/5.0226491
• Lahcene, A., Benamara, N., Benguediab, M., Benazza, A., 2024. Efficiency Improvements of Solar Collectors by Turbulence Promoters. Hungarian Journal of Industrial Chemistry 52, 1–9. https://doi.org/10.33927/hjic-2024-13
• Maulana Ibrahim, P., Danardono Dwi Prija Tjahjana, D., Yaningsih, I., Rio Prabowo, A., Harsito, C., Enoki, K., Endra Juwana, W., Indro Cahyono, S., 2023. Solar Air Heater Thermal Performance Enhancement using V-Up Continuous Ribs. E3S Web of Conferences 465, 01017. https://doi.org/10.1051/e3sconf/202346501017
• Mehranfar, S., Gharehghani, A., Azizi, A., Mahmoudzadeh Andwari, A., Pesyridis, A., Jouhara, H., 2022. Comparative assessment of innovative methods to improve solar chimney power plant efficiency. Sustainable Energy Technologies and Assessments 49, 101807. https://doi.org/10.1016/j.seta.2021.101807
• Nath, A., Dabi, M., Teyi, N., 2023. A numerical investigation of a plane solar air heater. E3S Web of Conferences 455, 02001. https://doi.org/10.1051/e3sconf/202345502001
• Omar Mohammed Hamdoon, 2020. A Review of Solar Air Heaters: Techniques for Thermal Performance Enhancement. Al-Rafidain Engineering Journal 25, 46–59. https://doi.org/10.33899/rengj.2020.128374.1065
• Pachori, H., Mishra, S., Sheorey, T., Choudhary, T., Hanamura, K., 2022. Analytical Study of Energy, Exergy and Thermohydraulic Performance Enhancement of Sustainable Solar Air Heater with C-Shape roughness. https://doi.org/10.21203/rs.3.rs-2245980/v1
• Parsa, H., Saffar-Avval, M., Hajmohammadi, M.R., 2021. 3D simulation and parametric optimization of a solar air heater with a novel staggered cuboid baffles. International Journal of Mechanical Sciences 205, 106607. https://doi.org/10.1016/j.ijmecsci.2021.106607
• Pazarlioğlu, H.K., Ekiciler, R., 2024. Effect of the Nanofluid Flow And Extended Surfaces On An Abrupt Expansion Tube Regarding Thermodynamic Irreversibility. Heat Transfer Research 55, 49–67. https://doi.org/10.1615/HeatTransRes.2023048288
• Pazarlioğlu, H.K., Tepe, A.Ü., Arslan, K., 2022. Optimization of Parameters Affecting Anti-Icing Performance on Wing Leading Edge of Aircraft. European Journal of Science and Technology. https://doi.org/10.31590/ejosat.1062495
• Pazarlıoğlu, H.K., Tepe, A.Ü., Arslan, K., 2025. Thermohydraulic performance assessment of new alternative methods for anti-icing application against current application in an aircraft. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 239, 1477–1493. https://doi.org/10.1177/09544089231190182
• Rajaseenivasan, T., Srinivasan, S., Srithar, K., 2015. Comprehensive study on solar air heater with circular and V- type turbulators attached on absorber plate. Energy 88, 863– 873. https://doi.org/10.1016/j.energy.2015.07.020
• Rasul, H.A.M., Hamakhan, I.A., Ibrahim, A.M., 2021. Absorber Type Optimization for Night-Shift Operation of Solar Air Heater. Journal of Engineering Research 9, 1–16. https://doi.org/10.36909/jer.v9iICRIE.11673
• Ravichandran, V., Kumar, P.M., Adaikalasamy, V., Gebreyohannes, D.T., 2026. Experimental investigation on solar air heating system using evacuated tube collector with coaxial tube. Scientific Reports 16, 7923. https://doi.org/10.1038/s41598-026-39094-2
• Sharma, S., Maithani, R., Randip Kumar Das, 2024. CFD Based Performance Evaluation of Solar Air Heater by using Centerline Perforated Sine Wave Baffles. Evergreen 11, 862–871. https://doi.org/10.5109/7183368
• Singh, S., Suman, S., Mitra, S., Kumar, M., 2023. Optimization of a novel trapezoidal staggered ribs configuration for enhancement of a solar air heater performance using CFD. Environmental Science and Pollution Research 30, 93582–93601. https://doi.org/10.1007/s11356-023-28978-9
• Veera Kumar, A., Arjunan, T. V., Seenivasan, D., Venkatramanan, R., Vijayan, S., 2021a. Thermal performance of an evacuated tube solar collector with inserted baffles for air heating applications. Solar Energy 215, 131–143. https://doi.org/10.1016/j.solener.2020.12.037
• Veera Kumar, A., Arjunan, T. V., Seenivasan, D., Venkatramanan, R., Vijayan, S., 2021b. Techno-Economic evaluation of an evacuated tube solar air collector with inserted baffles. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235, 1027–1038. https://doi.org/10.1177/0954408921989847
• Veera Kumar, A., Arjunan, T. V., Seenivasan, D., Venkatramanan, R., Vijayan, S., Matheswaran, M.M., 2021c. Influence of twisted tape inserts on energy and exergy performance of an evacuated Tube-based solar air collector. Solar Energy 225, 892–904. https://doi.org/10.1016/j.solener.2021.07.074
• Venkatramanan, R., Arjunan, T.V., Seenivasan, D., Veera Kumar, A., 2022. Parametric study of evacuated tube collector solar air heater with inserted baffles on thermal network for low-temperature applications. Journal of Cleaner Production 367, 132941. https://doi.org/10.1016/j.jclepro.2022.132941
• Venkatramanan, R., Arjunan, T. V., Seenivasan, D., Kumar, A.V., Selvaraj, V., Matheswaran, M.M., 2025. Energetic and enviro-economic performance of medium scale evacuated tube solar air heating system for industrial applications. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 239, 388–399. https://doi.org/10.1177/09576509241307457
• Warsama, A.I., Selimli, S., 2024. Effect of dust deposition density and particle size on the energetic and exergetic performance of photovoltaic modules: An experimental study. Renewable Energy 226, 120373. https://doi.org/10.1016/j.renene.2024.120373