DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS

Cilt: 10 Sayı: 1 20 Ocak 2012
  • Metin Şengül
PDF İndir
EN

DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS

Öz

In literature, there exist some tables containing normalized element values, to design low-pass lumped-element prototype filters with several different responses like maximally flat or equal-ripple. In this work, an algorithm is presented, to form such tables for stepped impedance prototype filters. By using the proposed algorithm, a table for 0.5 dB equal-ripple stepped impedance prototype filter is formed. Then a design example is given, to show the utilization of the formed table

Anahtar Kelimeler

Kaynakça

  1. Pozar DM, Microwave Engineering, John Wiley & Sons, Inc., 3rd ed., 2005.
  2. Matthaei GL, Young L, Jones EMT, Microwave
  3. networks and coupling structures: Dedham, Mass.: Artech House, 1980.
  4. Carlin HJ, Distributed circuit design with transmission line elements, Proc. IEEE 1971; 59(7): 1059-1081.
  5. Richards PI, Resistor-termination-line circuits, Proc. IRE 1948; 36: 217-220.
  6. Belevitch V, Classical Network Theory: San Francisco, CA: Holden Day, 1968.
  7. Aksen A, Design of lossless two-port with mixed lumped and distributed elements for broadband matching, Ph.D. dissertation, Bochum, Ruhr University, 1994.
  8. Ikeno N, A design theory of distributed constant filters, J Elec Comm Eng Japan 1952; 35: 544-549.

Ayrıntılar

Birincil Dil

İngilizce

Konular

-

Bölüm

-

Yazarlar

Metin Şengül Bu kişi benim

Yayımlanma Tarihi

20 Ocak 2012

Gönderilme Tarihi

20 Ocak 2012

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2010 Cilt: 10 Sayı: 1

Kaynak Göster

APA
Şengül, M. (2012). DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS. IU-Journal of Electrical & Electronics Engineering, 10(1), 1129-1134. https://izlik.org/JA26XP62GT
AMA
1.Şengül M. DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS. IU-Journal of Electrical & Electronics Engineering. 2012;10(1):1129-1134. https://izlik.org/JA26XP62GT
Chicago
Şengül, Metin. 2012. “DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS”. IU-Journal of Electrical & Electronics Engineering 10 (1): 1129-34. https://izlik.org/JA26XP62GT.
EndNote
Şengül M (01 Ocak 2012) DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS. IU-Journal of Electrical & Electronics Engineering 10 1 1129–1134.
IEEE
[1]M. Şengül, “DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS”, IU-Journal of Electrical & Electronics Engineering, c. 10, sy 1, ss. 1129–1134, Oca. 2012, [çevrimiçi]. Erişim adresi: https://izlik.org/JA26XP62GT
ISNAD
Şengül, Metin. “DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS”. IU-Journal of Electrical & Electronics Engineering 10/1 (01 Ocak 2012): 1129-1134. https://izlik.org/JA26XP62GT.
JAMA
1.Şengül M. DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS. IU-Journal of Electrical & Electronics Engineering. 2012;10:1129–1134.
MLA
Şengül, Metin. “DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS”. IU-Journal of Electrical & Electronics Engineering, c. 10, sy 1, Ocak 2012, ss. 1129-34, https://izlik.org/JA26XP62GT.
Vancouver
1.Metin Şengül. DESIGN TABLE FORMATION OF STEPPED IMPEDANCE PROTOTYPE FILTERS. IU-Journal of Electrical & Electronics Engineering [Internet]. 01 Ocak 2012;10(1):1129-34. Erişim adresi: https://izlik.org/JA26XP62GT