Determination of fuel and power requirement of a branch shredder for different vineyard pruning wastes
Abstract
The aim of the study was to determine the fuel consumption, torque and power requirement of a shredder machine used in the shredding of vineyard pruning wastes of different grape varieties. In the study, pruning wastes of Boğazkere, Öküzgözü and Şire grape cultivars, which are widely grown in Diyarbakır region, were used for tests. The experimens were carried out at three different rotation speeds of the engine (1500, 2000, 2500 rpm) and feeding rates (kg/h). Depending on these parameters fuel consumption, moment values and power were measured. The branch shredder machine has a 15 HP powerful. There are three chopper blades on the machine. The blades are driven by gasoline engine with the a belt and pulley system. According to obtained test results, per hour fuel consumption, power requirement and moment values increased for all three cultivars depending on the increase in the number of rotation of the blades, both at unloaded and under load. The highest fuel consumption was observed in Boğazkere cultivar, followed by Öküzgözü and Şire varieties, respectively. While the highest fuel consumption value was found as 1.535 kg/h in Boğazkere cultivar, the lowest value was obtained as 0.918 kg/h in Şire cultivar. A similar situation was obtained for power values. The power also increased with the increase in the number of blade revolutions While the highest power consumption value was obtained as 5.560 kW in Boğazkere cultivar, the lowest value was obtained as 3.326 kW in Şire cultivar. Here, there was no statistical difference between Boğazkere and Öküzgözü cultivars, but there was a significant difference between these cultivars and Şire cultivar. When the moment values of the cultivars were examined, the difference between cultivars was found to be very significant (p<0.01). The highest value was obtained as 26.26 Nm in Boğazkere variety, the variety with the highest Power and Fuel consumption value, while the lowest value was obtained as 15.65 Nm in Şire variety, which also had low fuel and power requirements.
Keywords
Supporting Institution
Dicle University Scientific Research Projects Coordinatorship (DUBAP)
Project Number
ZIRAAT.20.010
References
- Adamchuk, V., Bulgakov, V., Skorikov, N., Yezekyan, T., Olt, J. (2016). Developing a new design of wood chopper for grape vine and fruit tree pruning and the results of field testing. Agronomy Research 14(5), 1519-1529. Retrieved from https://agronomy.emu.ee/
- ASABE Standarts (2006). S358.2: 1:1 Measurement forages. 52nd edn. American Society of Agricultural Engineers, St Joseph MI. Retrieved from https://www.asabe.org/
- Bilandzija, N., Voca, N., Kricka, T., Matin, A., Jurisic, V. (2012). Energy potential of fruit tree pruned biomass in Croatica. Spanish Journal of Agricultural Research 10(2), 292-298. Retrieved from https://revistas.inia.es/index.php/sjar
- Çanakçı, M., Topakçı, M., Karayel, D., Ünal, İ., Çakır, M., Yiğit, M., Özdemir, E. (2018). Kendi Yürür Bir
- Budama Artığı Parçalama Makinası İşletme Giderlerinin Belirlenmesi. Tarım Makinaları Bilimi Dergisi, 14 (2), 127-134 (in Turkish). Retrieved from https://dergipark.org.tr/tr/download/article-file/622610
- Çanakçı, M., Topakçı, M., Karayel, D., Ağsaran, B., Kabaş, Ö., Yiğit, M. (2019). The effect of different blades on the performance values of a pruning chopper used to improve soil properties. Bulgarian Journal of Agricultural Science, 25 (No 5), 1052–1059. Retrieved from https://www.agrojournal.org/
- Dereli, İ. (2009). The effects of different blades on performance of stalk choppers used in vineyard. Ege University, Graduate School of Natural and Applied Sciences, Department of Agricultural Machines and Technologies, Master Thesis, Izmir, Turkiye, 69 pp.
- Dinçer, H. (1981). Agricultural force machinery. Ankara University Faculty of Agriculture Publications.
- Georging, Carroll E., C. Hansen. (2004). Engine and tractor power. American Society of Agricultural Engineers. 4th edition, 1-16. Retrieved from https://www.asabe.org/
- Magagnotti, N., Pari, L., Picchi, G., Spinelli, R. (2013). Technology alternatives for tapping the pruning residue resource. Bioresource Technology, 128, 697-702. Retrieved from https://www.sciencedirect.com/journal/bioresource-technology
