Performance evaluation of photovoltaic thermal hybrid system using copper oxide nanofluids

Abstract

The effect of cooling a flat plate collector integrated photovoltaic thermal (PVT) hybrid system with copper oxide nanofluid at different concentrations was compared with a non-cooled system. The Photovoltaic thermal hybrid system was designed with an efficient serpentine coil-based thermal absorber setup and was tested using various nanofluid concentrations. Copper oxide nanofluid empowered the system to attain significant electrical and thermal performance at higher concentrations. The electrical efficiency of the hybrid photovoltaic system increased by 17.61% at 0.05 M nanofluid concentration. The average value of the thermal efficiency increased by 71.17% at 0.05M nanofluid concentration. The thermal efficiency of the nanofluid-cooled module was found to be much better due to the improved heat absorption of nanoparticles. The solar panel surface temperature of the nanofluid-cooled system reduced from 68.4 ℃ (non-cooled system) to 44.74 ℃ (0.05 M) at noon. The highest efficiency values are achieved at a 0.05 M concentration of nanofluid.

Keywords

• Electrical efficiency
• Hybrid
• Molar concentration
• Nanofluid
• Photovoltaic
• Thermal efficiency

References

1. [1] Parthiban A, Reddy KS, Pesala B, Mallick TK. Effects of operational and environmental parameters on the performance of a solar photovoltaic-thermal collector. Energy Conversion and Management. 2020;205:112428. doi:10.1016/j.enconman.2019.112428
2. [2] Wang Z, Wei J, Zhang G, Xie H, Khalid M. Design and performance study on a large-scale hybrid CPV/T system based on unsteady-state thermal model. Solar Energy. 2019;177:427-439. doi:10.1016/j.solener.2018.11.043
3. [3] Kim JH, Kim JT. The experimental performance of an unglazed PV-thermal collector with a fully wetted absorber. Energy Procedia. 2012;30:144-151. doi:10.1016/j.egypro.2012.11.018
4. [4] Tonui JK, Tripanagnostopoulos Y. Air-cooled PV/T solar collectors with low-cost performance improvements. Solar Energy. 2007;81(4):498-511. doi:10.1016/j.solener.2006.08.002
5. [5] Jidhesh P, Arjunan TV, Gunasekar N, Mohanraj M. Experimental thermodynamic performance analysis of semi-transparent photovoltaic-thermal hybrid collectors using nanofluids. J Process Mech Eng. 2021;235(5):1639-1651. doi:10.1177/09544089211013663
6. [6] Tiwari MK, Mishra V, Dev R, Singh N. Effects of active cooling techniques to improve the overall efficiency of photovoltaic module - An updated review. E3S Web Conf. 2023;387:01012.
7. [7] Kim JH, Kim JT. The experimental performance of an unglazed PVT collector with two different absorber types. Int J Photoenergy. 2012;2012:312168. doi:10.1155/2012/312168
8. [8] Charde AA, Wele DV, Thorat PV. Synthesis and characterization of water-based silver nanofluids. Int J Electron Commun Soft Comput Sci Eng. 2015;344-346.

9. [9] Yu W, Xie H. A review on nanofluids: Preparation, stability mechanisms, and applications. J Nanomater. 2012;2012:435873. doi:10.1155/2012/435873
10. [10] Sharma P, Kumar V, Sokhal GS, Dasaroju G, Bulasara VK. Numerical study on performance of flat tube with water-based copper oxide nanofluids. Mater Today Proc. 2020;21:1800-1808. doi:10.1016/j.matpr.2020.01.234
11. [11] Shakir AK, Hajidavalloo E, Daneh-Dezfuli A, Abdulhaleem SM, Obayes OK. Experimental study on the performance of different photovoltaic thermal collectors with nano-technology. Energy Sources Part A: Recovery Util Environ Eff. 2023;45(3):8458-8477.
12. [12] Ibrahim A, Ramadan MR, Khallaf AEM, Abdulhamid MA. Comprehensive study for Al₂O₃ nanofluid cooling effect on the electrical and thermal properties of polycrystalline solar panels in outdoor conditions. Environ Sci Pollut Res. 2023;30(49):106838-106859. doi:10.1007/s11356-023-25928-3
13. [13] Lee JH, Hwang SG, Lee GH. Efficiency improvement of a photovoltaic thermal (PVT) system using nanofluids. Energies. 2019;12(16):3063. doi:10.3390/en12163063
14. [14] Yu Y, Long E, Chen X, Yang H. Testing and modelling an unglazed photovoltaic thermal collector for application in Sichuan Basin. Appl Energy. 2019;242:931-941. doi:10.1016/j.apenergy.2019.03.114
15. [15] Holman JP. Experimental methods for engineers. McGraw-Hill Series in Mechanical Engineering. 2012;761p.
16. [16] Alzaabi AA, Badawiyeh NK, Hantoush HO, Hamid AK. Electrical/thermal performance of hybrid PV/T system in Sharjah, UAE. Int J Smart Grid Clean Energy. 2014;3(4):385-389. doi:10.12720/sgce.3.4.385-389
17. [17] Abdallah SR, Elsemary IM, Altohamy AA, Abdelrahman MA, Attia AA, Abdellatif OE. Experimental investigation on the effect of using nanofluid (Al₂O₃-Water) on the performance of PV/T system. Therm Sci Eng Prog. 2018;7:1-7. doi:10.1016/j.tsep.2018.04.016
18. [18] Elayarani E, Mathiazhagan P. Improvement of efficiency on PV/T collector using nanofluids. Int J Curr Eng Sci Res. 2017;49(12):66-72.
19. [19] Kazem HA, Chaichan MT, Al-Waeli AH, Jarimi H, Ibrahim A, Sopian K. Effect of temperature on the electrical and thermal behaviour of a photovoltaic/thermal system cooled using SiC nanofluid: An experimental and comparison study. Sustainability. 2022;14(19):11897. doi:10.3390/su141911897
20. [20] Lari MO, Sahin AZ. Effect of retrofitting a silver/water nanofluid-based photovoltaic/thermal (PV/T) system with a PCM-thermal battery for residential applications. Renew Energy. 2018;122:98-107. doi:10.1016/j.renene.2018.01.034
21. [21] Kazem HA, Chaichan MT, Al-Waeli AH. Effect of CuO-water-ethylene glycol nanofluids on the performance of photovoltaic/thermal energy system: An experimental study. Energy Sources Part A: Recovery Util Environ Eff. 2022;44(2):3673-3691. doi:10.1080/15567036.2022.2070305
22. [22] Zamen M, Kahani M, Rostami B, Bargahi M. Application of Al₂O₃/water nanofluid as the coolant in a new design of photovoltaic/thermal system: An experimental study. Energy Sci Eng. 2022;100:1-13. doi:10.1002/ese3.1067
23. [23] Yousefi T, Veysi F, Shojaeizadeh E, Zinadin S. An experimental investigation on the effect of Al₂O₃–H₂O nanofluid on the efficiency of flat-plate solar collectors. Renew Energy. 2012;39(1):293-298. doi:10.1016/j.renene.2011.08.056
24. [24] Al-Waeli AH, Chaichan MT, Kazem HA, Sopian K. Comparative study to use nano-(Al₂O₃, CuO, and SiC) with water to enhance photovoltaic thermal PV/T collectors. Energy Convers Manag. 2017;148:63-73. doi:10.1016/j.enconman.2017.06.072
25. [25] Alktranee M, Shehab MA, Németh Z, Bencs P, Hernadi K. Effect of Zirconium oxide nanofluid on the behavior of photovoltaic–thermal system: An experimental study. Energy Reports. 2023;9:1265-1277. doi:10.1016/j.egyr.2022.12.065