Planning-stage sizing of a PV – wind – battery – diesel microgrid under joint reliability and operational CO₂-intensity constraints
Abstract
This study proposes a planning-stage techno-economic framework for sizing a standalone PV–wind–battery–diesel microgrid under simultaneous reliability and operational carbon-intensity constraints. Candidate system configurations defined by photovoltaic capacity, wind capacity, battery storage size, and diesel generator rating are evaluated using an hourly energy-balance simulation over a full annual cycle. Supply reliability is enforced through a loss-of-power-supply probability (LPSP) constraint of 1%, while environmental performance is controlled via a delivered-energy CO₂-intensity threshold of 0.25 kg CO₂/kWh. Renewable resource and load profiles were obtained from publicly available datasets to support transparency and reproducibility. System performance metrics included unmet load, renewable curtailment, battery utilization, diesel dispatch, fuel consumption, and levelized cost of electricity (LCOE). Results showed that feasible configurations achieved LCOE values between 0.19 – 0.31 USD/kWh and operational CO₂ intensity between 0.14 – 0.29 kg CO₂/kWh. Increasing renewable penetration and battery storage reduced diesel energy contribution by 52 – 78%. The framework provides a transparent and reproducible screening approach for identifying technically feasible and economically viable hybrid microgrid configurations prior to detailed optimization.
Keywords
- Hybrid microgrid
- planning-stage sizing
- PV–wind–battery system
- reliability constraint
- levelised cost of electricity (LCOE)
Supporting Institution
Ethical Statement
Thanks
References
- [1] Yang, H., Zhou, W., Lu, L., Fang, Z. Optimal sizing method for standalone hybrid solar–wind system with LPSP concept. Solar Energy 2008; 82(4): 354-367, DOI: 10.1016/j.solener.2007.10.012
- [2] Deshmukh, M.K., Deshmukh, S.S. Modeling of hybrid renewable energy systems. Renewable and Sustainable Energy Reviews 2008; 12(1): 235-249, DOI: 10.1016/j.rser.2006.07.011
- [3] Chauhan, A., Saini, R.P. Techno-economic feasibility study on integrated renewable energy system. Renewable and Sustainable Energy Reviews 2014; 32: 351-362, DOI: 10.1016/j.rser.2015.12.290
- [4] Bernal-Agustín, J.L., Dufo-López, R. Simulation and optimization of stand-alone hybrid renewable energy systems. Renewable and Sustainable Energy Reviews 2009; 13(8): 2111-2118, DOI: 10.1016/j.rser.2009.01.010
- [5] Ghaffari, A., Askarzadeh, A. Design optimization of a hybrid system subject to reliability level and renewable energy penetration. Energy 2020; 193: 116754, DOI: 10.1016/j.energy.2019.116754
- [6] Khatib, T., Mohamed, A., Sopian, K. Optimization of a PV/wind micro-grid for rural housing electrification using a hybrid iterative/genetic algorithm: Case study of Kuala Terengganu, Malaysia. Energy and Buildings 2012; 47: 321-331, DOI: 10.1016/j.enbuild.2011.12.006
- [7] Belmili, H., Haddadi, M., Bacha, S., Almi, M.F., Bendib, B. Sizing stand-alone photovoltaic–wind hybrid system: Techno-economic analysis and optimization. Renewable and Sustainable Energy Reviews 2014; 30: 821-832, DOI: 10.1016/j.rser.2013.11.011
- [8] Badwawi, R.A., Abusara, M., Mallick, T. A review of hybrid solar PV and wind energy system. Smart Science 2015; 3(3): 127-138, DOI: 10.1080/23080477.2015.11665647
Details
Primary Language
English
Subjects
Renewable Energy Resources
Journal Section
Research Article
Authors
Early Pub Date
May 12, 2026
Publication Date
-
Submission Date
February 22, 2026
Acceptance Date
May 12, 2026
Published in Issue
Year 2026 Number: Advanced Online Publication