Araştırma Makalesi

Heat Integration in Synthetic Fuel Production Plants

Cilt: 5 Sayı: 1 1 Temmuz 2024
PDF İndir
TR EN

Heat Integration in Synthetic Fuel Production Plants

Öz

This study addresses the integration of thermal energy to enhance the quality of energy management in methanol production systems. In this study, the minimum number of heat exchangers (HXs) required for optimum heat transfer was obtained by the pinch analysis method, taking into account temperature ranges and compression temperatures. This approach minimizes energy consumption and maximizes energy recovery, as it allows the waste heat generated within the system to be used in others that need heat. Thus, in order to maintain the system, there is a significant decrease in the amount of heat input and heat loss to the outside. In addition, this study evaluated the carbon emissions from coal at the end of heat integration (HI) and the ability of the system to reduce CO2 emissions. The results show that the heat exchanger network (HEN) optimized by the pinch analysis method significantly reduces the utility consumption and increases the energy recovery in methanol production. Thermal integration leads to a significant increase in emissions reductions, making the process more environmentally friendly. In conclusion, this research highlights the importance of thermal energy integration in methanol production and industrial processes, offering energy efficiency improvements and environmental benefits. As a result of the study, the emission reduction, which was 4513 tons/day with the same number of heat exchangers, increased to 4890 tons/day at the end of heat integration.

Anahtar Kelimeler

Kaynakça

  1. Besevli, B., Kayabasi, E., Akroot, A., Talal, W., Alfaris, A., Assaf, Y. H., Nawaf, M. Y., Bdaiwi, M., & Khudhur, J. (2024). applied sciences Technoeconomic Analysis of Oxygen-Supported Combined Systems for Recovering Waste Heat in an Iron-Steel Facility.
  2. Boldyryev, S. (2018). Heat Integration in a Cement Production (H. E.-D. M. Saleh & R. O. A. Rahman (eds.); p. Ch. 7). IntechOpen. https://doi.org/10.5772/intechopen.75820
  3. Chen, A. Y., & Lan, E. I. (2020). Chemical Production from Methanol Using Natural and Synthetic Methylotrophs. Biotechnology Journal, 15(6). https://doi.org/10.1002/biot.201900356
  4. Dalena, F., Senatore, A., Marino, A., Gordano, A., Basile, M., & Basile, A. (2018). Methanol Production and Applications: An Overview. In Methanol (pp. 3–28). Elsevier. https://doi.org/10.1016/B978-0-444-63903-5.00001-7
  5. IPCC. (1996). Vol. 3: Chapter 1 Energy. In Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories: Reference Manual (Issue 1996, pp. 1–40).
  6. Kim, J., Henao, C. A., Johnson, T. A., Dedrick, D. E., Miller, J. E., Stechel, E. B., & Maravelias, C. T. (2011). Methanol production from CO2 using solar-thermal energy: process development and techno-economic analysis. Energy & Environmental Science, 4(9), 3122. https://doi.org/10.1039/c1ee01311d
  7. Kiss, A. A., Pragt, J. J., Vos, H. J., Bargeman, G., & de Groot, M. T. (2016). Novel efficient process for methanol synthesis by CO 2 hydrogenation. Chemical Engineering Journal, 284, 260–269. https://doi.org/10.1016/j.cej.2015.08.101
  8. Liang, Z., Liang, Y., Luo, X., Wang, H., Wu, W., Chen, J., & Chen, Y. (2023). Integration and optimization of methanol-reforming proton exchange membrane fuel cell system for distributed generation with combined cooling, heating and power. Journal of Cleaner Production, 411, 137342. https://doi.org/https://doi.org/10.1016/j.jclepro.2023.137342

Ayrıntılar

Birincil Dil

İngilizce

Konular

Malzeme Mühendisliği (Diğer)

Bölüm

Araştırma Makalesi

Erken Görünüm Tarihi

27 Haziran 2024

Yayımlanma Tarihi

1 Temmuz 2024

Gönderilme Tarihi

22 Mart 2024

Kabul Tarihi

2 Mayıs 2024

Yayımlandığı Sayı

Yıl 2024 Cilt: 5 Sayı: 1

Kaynak Göster

APA
Alsunousı, M. A. M. (2024). Heat Integration in Synthetic Fuel Production Plants. Journal of Steel Research and Development, 5(1), 16-24. https://izlik.org/JA83BC58HC
AMA
1.Alsunousı MAM. Heat Integration in Synthetic Fuel Production Plants. JESRED. 2024;5(1):16-24. https://izlik.org/JA83BC58HC
Chicago
Alsunousı, Mohammed Abdulmunem Mohammed. 2024. “Heat Integration in Synthetic Fuel Production Plants”. Journal of Steel Research and Development 5 (1): 16-24. https://izlik.org/JA83BC58HC.
EndNote
Alsunousı MAM (01 Temmuz 2024) Heat Integration in Synthetic Fuel Production Plants. Journal of Steel Research and Development 5 1 16–24.
IEEE
[1]M. A. M. Alsunousı, “Heat Integration in Synthetic Fuel Production Plants”, JESRED, c. 5, sy 1, ss. 16–24, Tem. 2024, [çevrimiçi]. Erişim adresi: https://izlik.org/JA83BC58HC
ISNAD
Alsunousı, Mohammed Abdulmunem Mohammed. “Heat Integration in Synthetic Fuel Production Plants”. Journal of Steel Research and Development 5/1 (01 Temmuz 2024): 16-24. https://izlik.org/JA83BC58HC.
JAMA
1.Alsunousı MAM. Heat Integration in Synthetic Fuel Production Plants. JESRED. 2024;5:16–24.
MLA
Alsunousı, Mohammed Abdulmunem Mohammed. “Heat Integration in Synthetic Fuel Production Plants”. Journal of Steel Research and Development, c. 5, sy 1, Temmuz 2024, ss. 16-24, https://izlik.org/JA83BC58HC.
Vancouver
1.Mohammed Abdulmunem Mohammed Alsunousı. Heat Integration in Synthetic Fuel Production Plants. JESRED [Internet]. 01 Temmuz 2024;5(1):16-24. Erişim adresi: https://izlik.org/JA83BC58HC