ELEKTRİK ENERJİSİ VARLIĞINI ALGILAYIP HABER VEREN GİYİLEBİLİR TEKNOLOJİ ÜRÜNÜ GELİŞTİRME VE UYGULAMASI

Öz

Elektrik enerjisi kullanımının çok geniş olduğu günümüzde bu kaynağın avantajlarının yanında can ve mal kaybına sebebiyet verebilecek olumsuz sonuçları da vardır. Elektrik enerjisi üretim, dağıtım ve kullanım noktalarında çalışan teknik personelin gerek dikkatsizlik gerekse ihmal sonucunda iş kazasına uğraması teknik personelin can kaybına dahi sebep olabilmektedir. Elektrik panolarında çarpılma durumlarında var olan elektrik enerjisinin akışını kesen koruma elemanları (Sigorta, Kaçak akım koruma rölesi vb) olmasına rağmen yetkisiz insanların panoya müdahalesiyle yanlış elektrik bağlantıları sonucu enerjinin kesilemediği çalışma alanları olabilmektedir. Bu kapsamda elektrik enerjisinin olumsuz etkilerinden canlıları korumak amacıyla mevcut koruma elemanları yetersiz kalabilmektedir. Yapılan mevcut çalışmalarda kablolu koruma elemanlarının yanında kablosuz algılama elemanları da mevcuttur. Ancak belirli algılama mesafeleri olduğu için geliştirilmesi gerekir. Ve ergonomik bir tasarım ile işlerlik arttırılabilir. Bu gibi sebeplerden dolayı canlıların elektrik enerjisi altında olumsuzluklara maruz kalmamaları için koruma elemanlarının geliştirilmesi gerekliliği ortaya çıkmaktadır. Gelişen teknolojinin kullanılmasıyla yeni koruma ve ikaz elemanlarının geliştirilmesi gerekmektedir. Günümüzde giyilebilir teknolojilerin gelişimiyle birçok alanda kullanılması; elektrik enerjisinin varlığını çalışılan pano veya ortamda tespit edebilen bir giyilebilir teknoloji ürününün de olabileceğini ortaya koymaktadır. Çalışanların çalışma yapılan yerde elektrik enerjisine maruz kalarak çarpılmamaları için; elektriğin varlığını tespit ettiğinde uyarıda bulunan bir giyilebilir teknoloji ürünü tasarımı ve test sonuçlarını içeren bu çalışmayla temassız olarak AC gerilimin varlığı tespit edilebilmekte. Teknik personelin parmağına takabileceği bir elektronik devre ile gerilimin temassız olarak algılaması yapılıp kırmızı LED ile enerji varlığı bildirilmektedir. Yapılan test devresinin 8 cm mesafeye kadar 230V AC elektrik enerjisini kararlı bir şekilde algılayarak ışık ile uyarıda bulunduğu gözlemlendi.

Anahtar Kelimeler

• Temassız Gerilim Algılama
• Giyilebilir Teknoloji
• Voltaj Dedektörü
• Temassız Voltaj Dedektörü

Development and Application of A Wearable Technology Product That Detects and Informs The Presence of Electrical Energy

Abstract

Electrical energy has both positive and negative effects nowadays, with the potential to cause property and human loss. Technical professionals working at electrical energy generation, distribution, and utilization points may die due to carelessness or neglect. Although there are protection elements (fuses, residual current protection relays, etc.) in electrical panels that interrupt the flow of electrical energy in the event of a shock, there may be working areas where energy cannot be cut off due to incorrect electrical connections caused by unauthorized people interacting with the panel. Existing protective components may be insufficient. The experiments include both wired protection elements and wireless detection elements. However, they need to be enhanced because they have limited detection distances. Furthermore, using an ergonomic design can improve operability. New protection and warning features must be designed using developing technology. To prevent employees from being shocked by being exposed to electrical energy in the workplace, AC voltage can be detected without contact using this study, which includes the design and test results of a wearable technology product that warns when electricity is present. An electrical circuit that technical staff can wear on their finger detects voltage without contact and displays the existence of energy with a red LED. It was discovered that the test circuit detects 230V AC electrical energy up to 8 cm away and warns with light.

Keywords

• Non-Contact Voltage Detection
• Wearable Technology
• Voltage Detector
• Non-Contact Voltage Detector

Kaynakça

1. Aslan I., Çelik Y., Occupational Health and Safety Investigation of Employees in the Electricity Distribution Sector: Mus, Bitlis and Van Provinces Application. Journal of Labor Relations 1, 130-145, 2022. Retrieved from https://dergipark. org.tr/en/pub/cider/issue/71068/1083460
2. Ates F. M., Teber A., Güngör O., A Study on Basic Precautions Against Electrical Accidents and First Aid. Bayburt University Journal of Science and Technology 2(2), 336-347, 2019.
3. Ceylan H., Analysis of Occupational Accidents Occurring in Electricity Transmission Facilities in Turkey. Ejovoc (Electronic Journal of Vocational Colleges) 2 (1), 98-109, 2012. Retrieved from https://dergipark.org.tr/tr/pub/ejovoc/issue/5394/73163
4. Crockett C., Gulley J. R., Smith R., Smith C., The Design of a Wearable Non-Contact Voltage Detector.
5. Eker H., Solar cell on cotton denim fabric, (Master's thesis, Institute of Science and Technology), 2019.
6. Ersoz M., Isıtan A., Balaban M., Nanotechnology 1. BilalOfest Basim-Yayin & Matbaacilik, 2018.
7. Ertan K., Eldem C., A Study of A Representative Wearable Outer Skelette with Ergonomic Analysis Methods. Ergonomics 5(1), 18-25, 2022. https://doi.org/10.33439/ergonomi.1058235
8. Karabiyik Yerden N., Sustainability, European Green Deal, Marketing and a Research on Automotive Industry. Istanbul Journal of Social Sciences 38, 2023.

9. Karadeniz O., Work Accidents and Occupational Diseases and Inadequacy of Social Protection in the World and Turkey. Labor And Society, 3(34), 15-73, 2012.
10. Korkmaz S., GO/ceramic based supercapacitor fabrication and characterization, 2018.
11. Kozak M., Kozak S., Energy storage methods. International Journal of Technological Sciences 4(2), 17-29, 2012.
12. Liu X., Gao H., Sun L., Yao J., Generic Air-Gen Effect in Nanoporous Materials for Sustainable Energy Harvesting from Air Humidity. Advanced Materials 2300748, 2023.
13. Mamur H., Realization of a computerized data acquisition and test system for the investigation of electrical, thermoelectric and thermal parameters of thermoelectric generator, 2013.
14. Mutlu M., Cabuk A., Root Cause Analysis in Electrical Accidents in Turkey. OHS Academic 3 (1), 15-24, 2021. Retrieved from https://dergipark. org.tr/en/pub/isgakademik/ issue/60198/849432.
15. Pamuk O., Yildiz E. Z., Application of Electronic Circuits on Ready-to-Wear Clothing with Embroidery Process. Dokuz Eylul University Engineering Faculty Science and Engineering Journal 23(67), 319-325, 2021. https://doi.org/10.21205/deufmd.2021236728
16. Yang P., Wen X., Ni X., Peng C., A Novel Non-contact AC Voltage Detector Based on Concentric Double-layer Spherical Shell Structure. Journal of Electronics & Information Technology 43(6), 1637-1643, 2021. doi: 10.11999/JEIT200286
17. Tosun S., An Evaluation on Occupational Health and Safety in Electrical Work. Journal of Sustainable Engineering Applications and Technological Developments 5(2), 232-246, 2022. https://doi.org/10.51764/smutgd.1082589
18. Turgut Z. N., Danişan T., Tamer E., Evaluation and selection of wearable technologies in the world of sports and fashion with CRM methods. Journal of Sport and Recreation for Everyone 3(1), 1-11, 2021.
19. Turkcan C., Wearable Tissue Electronics. Beykent University Journal of Science and Engineering Sciences, 14(1), 27-34, 2021. https://doi.org/10.20854/bujse.931291
20. Sagbaş E. A., Balli S., Yildiz T., Wearable smart devices: past, present and future. Academic Informatics Conference 30, 749-756, 2016.
21. Sezer K. C., Basmaci G., An Overview of Rechargeable Batteries. Journal of Engineering Sciences and Design 10(1), 297-309, 2022.
22. Zhu J., Lei X., Su Z., Liu T., Liu K., Yu G., Zhu L., Study of Non-contact voltage detector of 1000kV UHV AC based on MEMS electric field sensor. In MATEC Web of Conferences, EDP Sciences 160, 02001, 2018.
23. Rojaee R., Fathi M., Raessi K., Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments. Applied Surface Sciences 285, 664-673, 2013.
24. Sanchez-Hernandez Z. E., Dominguez-Cresp M. A., Torres-Huerta A. M., Onofre-Bustamante E., Adame J. A., Dorantes-Rosales H., Improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering. Materials Characterization 91, 50-57, 2014.
25. Song Y. W., Shan D. Y., Han E. H., Electrodeposition of Hydroxyapatite Coating on AZ91D magnesium alloy for biomaterial application. Material Letters 62, 3276-3279, 2008.
26. Sutha S., Kavitha K., Karunakaran G., Rajendran V., In-vitro bioactivity, biocorrosion and antibacterial activity of silicon integrated hydroxyapatite/chitosan composite coating on 316L stainless steel implants. Materials Science and Engineering C 33, 4046-4054, 2013.
27. Tan Y. H., Abdullah M. O., Nolasco-Hipolito C., Taufiq-Yap Y. H., Waste ostrich- and chicken-eggshells as heterogeneous base catalyst for biodiesel production from used cooking oil: Catalyst characterization and biodiesel yield performance. Applied Energy 160, 58-70, 2015.
28. Tangboriboon N., Kunanuruksapong R., Sirivat A., Kunanuruksapong R., Sirivat A., Preparation and properties of calcium oxide from eggshells via calcination. Materials Science Poland 30, 313-322, 2012.
29. Toygun Ş., Köneçoğlu G., Kalpaklı Y., General principles of sol-gel. Sigma Journal of Engineering and Natural Sciences, 31, 456-476. 2013.
30. Wei M., Ruys A. J., Swain M. V., Milthorpe B. K., Sorrell C. C., Hydroxyapatite-coated metals: Interfacial reaction during sintering. Journal of Materials Science: Materials in Medicine 16, 101-106, 2005.
31. Yazdani J., Ahmadian E., Sharifi S., Shahi S., Dizaj S. M., A short view on nanohydroxyapatite as coating of dental implants. Biomedicine & Pharmacotherapy 105, 553-557, 2018.
32. Yazıcı M., Çomaklı O., Yetim T., Yetim A. F., Çelik A., The effect of plasma nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316L stainless steel implant material in SBF solution. Surface and Coatings Technology 261, 181-188, 2015.
33. Zhang J. X., Guan R. F., Zhang X. P., Synthesis and characterization of sol-gel hydroxyapatite coating deposited on porous NiTi Alloys. Journal of Alloys and Compounds 509, 4643-4648, 2011.
34. Zhong Z., Qin J., Ma J., Cellulose acetate/hydroxyapatite/chitosan coatings for improved corrosion resistance and bioactivity. Materials Science and Engineering: C 49, 251-255, 2015.
35. Zhou Z., Zheng B., Gu Y., Shen C., Wen J., Meng Z., Chen S., Ou J., Qin A., New approach for improving anticorrosion and biocompatibility of magnesium alloys via polydopamine intermediate layer-induced hydroxyapatite coating. Surfaces and Interfaces 19, 100501, 2020.