ANALYSIS OF DEAD JOB ACCIDENTS REALIZED JAMMING AND FALLING IN MACHINES

Öz

The large number of occupational accidents in Turkey and among the first businesses in terms of serious consequences is located in metalworking manufacturing sector. It is understood that necessary precautions have not been taken in occupational accidents that have been referred to as judicial cases for occupational health and safety. A significant proportion of job accidents that have been referred to as forensic cases are occupational accidents that occur in the form of losing to machines, splashing and dropping a material. With this research, it is aimed to determine the defects of these dead accidents by examining the occupational accidents that occurred in the form of losing to the machines, splashing and dropping of a material, so that these dead accidents do not occur again. In these work incidents, the autopsy and the place where the win occurred, the necessary data were collected and necessary photographs were made. It is understood that the necessary precautions have not been taken in the occupational accidents, which are referred to as judicial cases, in terms of occupational health and safety. These dead work accidents are a problem that must be resolved as a country reality and it is understood that the experts are invited to dead work accidents in every insecure environment and conditions that are not secured and supervised. These dead work accidents are highly accidents and very serious work accidents that need to be solved. This work focuses on fatal accidents and deaths in the form of losing machines, bouncing a ball and dropping a ball. It has been determined that the security problem, which is frequently detected in dead occupational accidents, is caused by conscious and unconscious human error. Work accidents in the form of losing to various machines in our country, splashing and dropping of a material have been investigated and it has been determined that the causes of these dead accidents are defective at the same time and suggestions are offered to prevent such dead accidents. Law No. 6331, when examined in its entirety, can be said to have not brought rooted and effective rules aimed at lifting the adverse conditions causing work accidents and occupational diseases, contrary to the claim it carries. These are workplaces with between 1 and 49 employees who account for 52 percent of the workplace casualties in 2013 and 2017, 66 percent of the active employers and 61 percent of the workplace. It has been determined that these workplaces are performed in workplace health and safety unit, workplace physician, job security engineer, workplace nurse or work place where health officer does not have employment requirement. Employers have not been given the opportunity to be a "job security specialist and/or workplace physician", which would create problems on the business scene. Since this situation is clearly contrary to the rule of professional independence, it is possible to say that the limited authority given to the work physician or job security specialist will also be dysfunctional.

Anahtar Kelimeler

• Harvesting Machine,Splashing and Dropping of a Material

MAKİNELERDE SIKIŞMA VE DÜŞME ŞEKLİNDE GERÇEKLEŞMİŞ ÖLÜMLÜ İŞ KAZALARIN ANALİZİ

Öz

Yapılan bu araştırma ile makinelere kaptırma, bir maddenin sıçraması ve düşmesi şeklinde gerçekleşen ölümlü iş kazaları incelenerek, bu kazalardaki kusurların neler olduğu tespit edilerek tekrar bu kazaların oluşmaması amaçlanmaktadır. Gerçekleşen bu ölümlü iş kazalarında otopside ve kazanın oluştuğu yerde incelemeler yapılarak gerekli veriler toplanmış ve gerekli fotoğraflamalar yapılmıştır. Adli vaka olarak adliyeye intikal eden bu ölümlü iş kazalarında, işyerlerinde iş sağlığı ve güvenliği açısından gerekli tedbirlerin alınmadığı anlaşılmaktadır. Yaşanan bu iş kazaları bir ülke gerçeği olarak karşımızda çözülmesi gereken bir sorun olarak durmakta, uzman kişilerce güvenliği ve denetimi yapılmayan her türlü güvensiz ortam ve koşullar iş kazalarına davetiye çıkarttığı anlaşılmaktadır. Bu ölümlü iş kazaları yüksek oranlı ve çözülmesi gerekli çok ciddi iş kazalarındandır. Yapılan bu çalışmayla makinelere kaptırma, bir maddenin sıçraması ve düşmesi şeklinde gerçekleşen ölümlü iş kazalarına ve sebeplerine odaklanılmaktadır. Bu çalışmada diğer risklerden ziyade makinelere kaptırma, bir maddenin sıçrama ve düşme riskleri, sebepleri ve yapılması gereken önlemler üzerinde durulur. Bu gerçekleşen ölümlü iş kazalarında sıklıkla tespit edilen güvenlik sorununun bilinçli ve bilinçsiz insan hatasından kaynaklandığı belirlenmiştir. Ülkemizde meydana gelen çeşitli makinelere kaptırma, bir maddenin sıçraması ve düşmesi şeklinde gerçekleşen ölümlü iş kazaları incelenmiş, bu kazaların sebepleri kimlerin ne oranda kusurlu olduğu saptanmış ve bu tür kazaların oluşmasını engellemek için öneriler sunulmuştur.

Anahtar Kelimeler

• Makinelere kaptırma,Maddenin Sıçraması ve Düşmesi,, Kaza Analizi

Kaynakça

1. 1. Cotter, D.M. (1986). Work-related deaths in 1984: BLS survey findings. Monthly Labor Review, 109, 42–45.
2. 2. Gens, D., Jones, J.W. & Nesbit, G. (1984). The Employee Injury Profile. St. Paul, MN: The St. Paul Companies.
3. 3. Hansen, C. (1989). A casual model of the relationship among accidents, biodata, personality, and cognitive factors. Journal of Applied Psychology, 74 (1), 81–90.
4. 4. Jones, J.W. (1989). A personnel selection approach to industrial safety. Paper presented at the 97 th Annual Convention of the American Psychological Association, New Orleans, August 13.
5. 5. Jones, J.W. (1991). Accident prevention through personnel selection. In J. Jones, Editor,Preemployment Honesty Testing: Current Research and Future Directions. Westport, CT: Quorum Books
6. 6. Jones, J.W. (1991). Accident prevention through personnel selection. In J. Jones, Editor, Preemployment Honesty Testing: Current Research and Future Directions. Westport, CT: Quorum Books.
7. 7. Jones, J.W. & Foreman, R. (1984). Relationship of PSI-3S safety scale scores to motor vehicle reports. St. Paul, MN: Technical Report: The St. Paul Fire and Marine, The Human Factors Department.
8. 8. Jones, J.W. & Wuebker, L.J. (1985). Development and validation of the Safety Locus of Control Scale.Perceptual and Motor Skills, 61, 151–161.

9. 9. Jones, J.W. & Wuebker, L.J. (1988). The psychological assessment of employees' safety potential. Park Ridge, IL: Technical Report, London House, Inc., Research and Development Group.
10. 10. Montag, I. & Comrey, A.I. (1987). Internality and externality as correlates of involvement in fatal driving accidents. Journal of Applied Psychology, 72 (3), 339-343.
11. 11. National Safety Council (1983). Accident facts 1983 edition. Chicago, IL: National Safety Council.
12. 12. Wuebker, L.J. (1987). The Safety Locus of Control Scale: a construct validation study. Unpublished manuscript.
13. 13. Wuebker, L.J., Jones, J.W., & DuBois, D. (1985). Safety locus of control and employees' accidents. Paper presented at the Sixth Annual Industrial/Organizational Psychology Graduate Student Conference, University of Akron, Akron, Ohio, April 12–14.
14. 14. Zohar, D. (1980). Safety climate in industrial organizations: theoretical and implied implications. Journal of Applied Psychology, 65, 96–102.
15. 15. Zile M., (2013). Adliyeye İntikal Eden İş Kazaların Analizi ve Nedensellik Modellemesinin Oluşturulması, VII. Ulusal İşçi Sağlığı ve İş Güvenliği Kongresi, Yayın No: E/2013/600, ISBN: 978-605-01-0469-1, 435-439, Çukurova Üniversitesi Adana.
16. 16. Zile M., (2015). Bakım Ve Onarım Kaynaklı Adli Vaka İş Kazalarında Sebeplendirme Yaklaşımları Ve Alınması Gereken Önlemler, VIII. Ulusal İşçi Sağlığı ve İş Güvenliği Kongresi, Yayın No:E/2015/635, ISBN: 978-605-01-0710-4, 626, Çukurova Üniversitesi Adana.
17. 17. Zile M. (2016). Maden Ocaklarında İş Güvenliğini Artırmak İçin Bulanık Mantık Temelli Oluşturulan İş Güvenliği Risk Analiz Modellemesi ve Yazılımı, International Conference Safety & Health (Uluslararası 8. İş Sağlığı ve Güvenliği Konferansı) 8-11 May 2016, Tiosconference, Çalışma ve Sosyal Güvenlik Bakanlığı Yayın No:61, İstanbul, 471-479.
18. 18. Zile M. (2017). Ülkemizde Gerçekleşen Elektrik İş Kazaları Ve Bu Kazalardaki Kusur Oranlarının Belirlenmesi, International Conference on Multidisciplinary, Science, Engineering and Technology (IMESET’17Bitlis), e - ISBN: 978-605-82480-3-8, Oct27-29, Bitlis, 234-239.