A COMPACT 2-WAY MULTISECTION POWER DIVIDER for BROADBAND OPERATIONS

Öz

This paper represents a broadband 2-ways Wilkinson power divider for S-band (2-4 GHz), C-band (4-8 GHz) and X-bands (8-12 GHz) applications. The broadband design is proposed by dint of a multisection Wilkinson power divider topology with utilizing the microstrip technology on a single layer printed circuit board. The proposed design has a 7-sections to achieve an operating frequency bandwidth of 2-12 GHz. The surface mount resistors are utilized in the design to enhance the isolation between the output ports. In addition, a prototype of the proposed design is manufactured on a Rogers 4003C and the 0402 package surface mount resistors are soldered between the output ports of each section. The prototype has input reflection coefficient better than -15 dB, -20 dB and -10 dB, respectively in the S-, C-, X-bands. Moreover, the prototype has output reflection coefficients better -17 dB, -20 dB and -10 dB, respectively in the S-, C- and X-bands. The measured insertion loss is less than -5 dB. Furthermore, the isolation between the output ports is better than -10 dB, -17 dB and -15 dB, respectively in the S-, C- and X-bands. Furthermore, the total phase variation between the output ports are less than 1.8° in the frequency range from 2 to 12 GHz. The prototyped multisection 2-way power divider illustrates a broadband characteristic with better phase imbalance and the measurement and simulation results are close to each other. The total size of the prototype is 4x41 mm2.

Anahtar Kelimeler

• Wilkinson power divider
• broadband
• multisection
• coupled line
• compact

A COMPACT 2-WAY MULTISECTION POWER DIVIDER FOR BROADBAND OPERATIONS

Öz

This paper represents a broadband 2-ways Wilkinson power divider for S-, C- and X-bands applications. The broadband design is proposed by dint of a multisection Wilkinson power divider topology with utilizing the microstrip technology on a single layer printed circuit board. The proposed design has a 7-sections to achieve an operating frequency bandwidth of 2-12 GHz. The surface mount resistors are utilized in the design to enhance the isolation between the output ports. In addition, a prototype of the proposed design is manufactured on a Rogers 4003C and the 0402 package surface mount resistors are soldered between the output ports of each section. The prototype has input reflection coefficient better than -15 dB, -20 dB and -10 dB in the S-band (2-4 GHz), C-band (4-8 GHz) and X-band (8-12 GHz), respectively. Moreover, the prototype has output reflection coefficients better -17 dB, -20 dB and -10 dB in the S-band, C-band and X-band, respectively. The measured insertion loss is less than -5 dB. Furthermore, the isolation between the output ports is better than -10 dB, -17 dB and -15 dB in the S-band, C-bands and X-band, respectively. Furthermore, the total phase variation between the output ports are less than 1.8° in the operating frequency bandwidth of 2-12 GHz. The prototyped multisection 2-way power divider illustrates a broadband characteristic with better phase imbalance and the measurement results are in good agreement with the simulation results. The total size of the prototype is 4x41 mm.

Anahtar Kelimeler

• Wilkinson power divider
• broadband
• multisection
• coupled line
• compact

Kaynakça

1. [1] Jiang, Y., Hu, K., Feng, L., Zhang, H., Shi, Y., Tang, W., & Yu, X. (2021). Ultra wideband lumped Wilkinson power divider on gallium arsenide integrated passive device technology. International Journal of RF and Microwave Computer‐Aided Engineering, 31(12), e22898.
2. [2] Kasar, Ö., & Kahriman, M. (2020). A theoretical design of ultra‐wideband multisection Wilkinson power divider using Euler polynomials. Microwave and Optical Technology Letters, 62(12), 3869-3875.
3. [3] Sutbas, B., Ozbay, E., & Atalar, A. (2020). Accurate isolation networks in quadrature couplers and power dividers. IEEE Transactions on Circuits and Systems II: Express Briefs, 68(4), 1148-1152.
4. [4] Iqbal, M., Camarchia, V., Pirola, M., & Quaglia, R. (2016, May). A miniaturized wilkinson power divider for ultra wide-band operation. In 2016 21st International Conference on Microwave, Radar and Wireless Communications (MIKON) (pp. 1-4). IEEE.
5. [5] Tas, V., & Atalar, A. (2014). An optimized isolation network for the Wilkinson divider. IEEE Transactions on Microwave Theory and Techniques, 62(12), 3393-3402.
6. [6] Mabrok, M., Zakaria, Z., Sutikno, T., & Alhegazi, A. (2019). Wideband power amplifier based on Wilkinson power divider for s-band satellite communications. Bulletin of Electrical Engineering and Informatics, 8(4), 1531-1536.
7. [7] Yoon, K. C., & Kim, K. G. (2019). Miniaturization of a single‐ended mixer using T‐shaped Wilkinson power combiner for medical wireless communication applications. Microwave and Optical Technology Letters, 61(8), 1977-1982.
8. [8] Li, M., Jiang, L., & Yeung, K. L. (2020). A novel wideband decoupling network for two antennas based on the Wilkinson power divider. IEEE Transactions on Antennas and Propagation, 68(7), 5082-5094.

9. [9] Le, T. H., Pham, D. P., Ho, M. C., Dam, X. D., Zhu, X. W., Wang, X., & Liu, P. (2019, October). A two-path output low phase noise local oscillator for RF front-end applications. In 2019 International Conference on Advanced Technologies for Communications (ATC) (pp. 297-301). IEEE.
10. [10] Saleh, S., Ismail, W., Abidin, I. S. Z., Jamaluddin, M. H., Bataineh, M. H., & Alzoubi, A. S. (2020). N-way compact ultra-wide band equal and unequal split tapered transmission lines wilkinson power divider. Jordanian Journal of Computers and Information Technology (JJCIT), 6(3), 291-302.
11. [11] Kim, J., & Lee, Y. (2017). A Z -Transform Method for Synthesis of Unequal-Length Multisection Transmission Lines for Multiband Applications. IEEE Transactions on Microwave Theory and Techniques, 65(9), 3200-3210.
12. [12] Kizilbey, O., Bozdemir, S., & Yarman, B. S. (2017, April). 2–10 GHz multisection 2-way Wilkinson power divider with enhanced port match and isolation. In 2017 IEEE 18th Wireless and Microwave Technology Conference (WAMICON) (pp. 1-4). IEEE.
13. [13] Chen, A., Zhuang, Y., Zhou, J., Huang, Y., & Xing, L. (2018). Design of a broadband Wilkinson power divider with wide range tunable bandwidths by adding a pair of capacitors. IEEE Transactions on Circuits and Systems II: Express Briefs, 66(4), 567-571.
14. [14] Oraizi, H., & Yousefi, A. (2017). Optimum design of a wideband planar N-way fork power divider with arbitrary power division and input-to-output impedance matching. AEU-International Journal of Electronics and Communications, 79(1), 83-93.