Linear Delta Robot Controlled with PLC Based On Image Processing

Yıl 2022, Cilt: 5 Sayı: 2, 150 - 158, 30.11.2022

Sıtkı Öztürk Fatma Kuncan

https://doi.org/10.34088/kojose.1058559

Cited By: 1

Öz

Delta Robot is taking an important place in industry 4.0. Its ability to work fast and with precision is the reason why this robot now is used worldwide in the industrial field. Delta robots are mostly used for packaging, 3D printing, pick and place, etc. This robot can be controlled using programmable logic controller (PLC) devices. In recent years, image processing methods have been widely used in many robot applications. In this study, it is aimed to ensure that the robot successfully moves to the determined points by using image processing methods. Images for this study were obtained by attaching a camera to the robot system. In this study, the aim is to set the robot to move based on the visual data that is taken by the camera. The coordinates of each object are defined after several steps in image processing. To be able to move the robot to the desired coordinates, inverse and forward kinematic analysis is proposed. The obtained values are transferred to PLC using OPC. The necessary coding in TIA Portal is done to control the motor drivers so that the three stepper motors can ensure the delta robot moves to the desired coordinate position.

Anahtar Kelimeler

Linear Delta Robot, Visual Positioning, Programmable Logic Controller, Kinematic Analysis, OPC, Image Processing

Kaynakça

• [1] Köse İ., Öztürk S., Kuncan M., 2019. Pantography application with real-time PLC based on image processing in gantry robot system. European Journal of Technique (EJT), 9, pp. 219-229.
• [2] Çubukçu A., Kuncan M., İmren M., Erol F., Ertunç HM., Öztürk S., & Kaplan K., 2015. Görüntü işleme ile 3 eksenli robot mekanizması üzerinde nesne ayırt edilmesi ve sıralanması. Otomati̇k Kontrol Ulusal Toplantısı, pp. 637-641.
• [3] Bakır A., Güney ÖF., Kuncan M., Ertunç HM., 2012. 3 Eksenli Robot Mekanizmasına Monte Edilmiş Bir Kamera Vasıtasıyla Farklı Rotasyon ve Boyutlardaki Geometrik Cisimlerin Tanımlanarak Vakum Tutucu ile Ayrılması. Otomatı̇k Kontrol Ulusal Toplantısı, Niğde, Turkey, pp. 606-609.
• [4] Horoz E., Öten HF., Kuncan M., Ertunç HM., 2013. Kamera Yardımı ile Ayırt Edilen ve Tanımlanan Cisimlerin 3 Eksenli Robot Mekanizması ile Taşınması. Otomatı̇k Kontrol Ulusal Toplantısı, Malatya, Turkey, pp. 1236-1240.
• [5] Warin P., Kamol C., and Ratchatin C., 2013. VISUAL POSITIONING OF A DELTA ROBOT, Mechanical Engineering Department, Chulalongkorn University, Bangkok, 10330, Thailand, April 20.
• [6] Vishesh G., Tarun J., Sahil S., Silica K., 2017. Specific Color Detection in Images using RGB Modelling in MATLAB, International Journal of Computer Applications, 161, March 2017, pp. 0975 – 8887.
• [7] Robert L., Williams II., 2015. Ph.D., The Delta Parallel Robot: Kinematics Solutions, Mechanical Engineering, Ohio University, April.
• [8] Joseph Q., 2016. Oberhauser, Design, Construction, Control, and Analysis of Linear Delta Robot, the faculty of the Russ College of Engineering and Technology of Ohio University, April.
• [9] Priyanto H., Miftahuddin Z., 2015. Color-Texture Based Object Tracking Using HSV Color Space and Local Binary Pattern, International Journal on Electrical Engineering and Informatics, 7, June.
• [10] Senthilkumaran N., Vaithegi S., 2016. Image Segmentation by Using Thresholding Techniques for Medical Images, Computer Science & Engineering: An International Journal (CSEIJ), 6, February.
• [11] Seth H., Gregory DH., Peter IC., 1996. A Tutorial on Visual Servo Control, IEEE Transanctions on Robotics and Automation, 12, October.
• [12] Burger W., 2016. Zhang’s camera calibration algorithm: in-depth tutorial and implementation. 16, pp. 1-6.
• [13] Vocetka M., Huňady R., Hagara M., Bobovský Z., Kot T., & Krys V., 2020. Influence of the Approach Direction on the Repeatability of an Industrial Robot. Applied Sciences, 10, 8714.
• [14] Bolton W., 2015. Programmable logic controllers. Newnes.
• [15] Krawczyk M., 2022. Project and implementation of the control of the loading and unloading station of the technological line for surface treatment of metal bottles (Doctoral dissertation, Instytut Automatyki Robotyki).
• [16] Guzmán HSG., 2017. OOP with S7-SCL, implemented to plastic welding machines.
• [17] Fetić A., Jurić D., & Osmanković D., 2012. The procedure of a camera calibration using Camera Calibration Toolbox for MATLAB. In 2012 Proceedings of the 35th International Convention MIPRO, pp. 1752-1757.
• [18] Tekinalp Z., Öztürk S., Kuncan M., 2013. OPC Kullanılarak gerçek zamanlı haberleşen Matlab ve PLC kontrollü sistem. Otomatik Kontrol Ulusal Toplantısı, TOK2013, pp. 26-28.