High Performance Polyethylene (Hppe) Fibers

Öz

High performance polyethylene (HPPE) fibers exhibit high strength, high elasticity modulus as well as superior performance with their low density and high mechanical properties. HPPE fibers are generally produced by gel-spinning process. They display not only high abrasion and fatigue resistance, but also exhibit resistance to most chemicals. These fibers can float on the water with their low density, less than 1 g/cm3, and they are preferred in various marine applications due to their water and moisture resistant features as well as high mechanical properties. Furthermore, high energy absorption of these fibers allows for their use in ballistic products. Although their low melting temperature limits the application areas of HPPE fibers, today, it is possible to come across their end-use applications in many areas of technical textiles such as medical, protective and sport textiles.

Anahtar Kelimeler

• High performance fiber
• high strength fiber
• high performance polyethylene fiber
• high strength polyethylene fiber
• high modulus polyethylene fiber
• ultra high molecular weight polyethylene fiber

Yüksek Performanslı Polietilen (HPPE) Lifleri

Öz

Yüksek performanslı polietilen (HPPE) lifleri yüksek mukavemet ve elastisite modülünün yanında düşük yoğunlukları ve yüksek mekanik özellikleri ile üstün performans sergilemektedirler. Genellikle jelden lif çekim yöntemi kullanılarak üretilen HPPE lifleri yoğunluklarının düşük, sürtünme ve yorulma dayanımlarının yüksek olmalarının yanı sıra kimyasal maddelerin çoğuna da dayanıklıdırlar. 1 g/cm³’ün altındaki yoğunluğu ile su üzerinde yüzebilen bu lifler, yüksek mekanik özellikleriyle suya ve neme dayanıklılığı bir arada bulundurması sayesinde denizciliğin birçok alanında tercih edilen bir malzeme haline gelmiştir. Ayrıca, bu liflerin enerji absorbsiyonunun yüksek olması balistik ürünlerde kullanımını da sağlamaktadır. Erime sıcaklıklarının düşük olması kullanım alanlarını sınırlasa da, günümüzde medikal, koruyucu, taşıma ya da spor teknik tekstilleri başta olmak üzere neredeyse teknik tekstillerin tüm alanlarında kullanımlarına rastlamak mümkündür.

Anahtar Kelimeler

• yüksek performanslı lif
• yüksek mukavemetli lif
• yüksek performanslı polietilen lifi
• yüksek mukavemetli polietilen lifi
• yüksek modüllü polietilen lifi
• ultra yüksek molekül ağırlıklı polietilen lifi

Kaynakça

1. UHMWPE Fiber, http://www.ropes.co.kr/miracle/e-pro-1. asp, (Şubat 2015)
2. Erdoğan Ü.H. (2012). Yüksek Mukavemetli Lifler Ve İplikler, TSE Standard Ekonomik ve Teknik Dergi, 51, (602), 57-65.
3. Horrocks A., Anands C. (2003). Teknik Tekstiller El Kitabı (Technical Textiles Handbook), The Textile Institute, Türk Tekstil Vakfı, İstanbul.
4. Horrocks A.R., Anand S.C. (2000). Handbook of Technical Textiles, Woodhead Publishing Limited, Cambridge.
5. Bunsell A.R. (2009). Handbook of Tensile Properties of Textile and Technical Fibres, Woodhead Publishing Limted, Cambridge.
6. Hearle J.W. (2001). High-Performance Fibres, CRC Press, Cambridge.
7. Wilusz E. (2008). Military Textiles, Woodhead Publishing Limited, Cambridge.
8. Scott R.A. (2005). Textiles for Protection, CRC Press, Cambridge.

9. McIntyre J.E. (2004). Synthetic Fibres: Nylon, Polyester, Acrylic, Polyolefin, Elsevier.
10. Cook J.G. (1984). Handbook of Textile Fibres: Man-Made Fibres, Elsevier.
11. Bower D.I. (2002). An Introduction to Polymer Physics, Cambridge University Press.
12. Tayyar A.E., Alan G. (2007). Sentetik Liflerden Üretilen Halat Yapıları Ve Kullanım Performansları Tekstil ve Mühendis, 14, (68).
13. Başer İ. (2002). Elyaf Bilgisi, Marmara Üniveristesi Döner Sermaye İşletmesi Teknik Eğitim Fakültesi Matbaa Birimi, İstanbul.
14. Ugbolue S. (1990). Structure/Property Relationships in Textile Fibres, Textile Progress, 20, (4), 1-43.
15. Polymer Structure, https://www.nde-ed.org/ EducationResources/CommunityCollege/Materials/ Structure/polymer.htm, (Ocak 2015)
16. Glossary C.T. (2001). Celanese Acetate, New York, 10016, 63.
17. UHMWPE: Gel Spinning, http://archimorph. com/2010/05/26/uhmwpe-gel-spinning/, (Şubat 2015)
18. Carr C. (1995). Chemistry of the Textiles Industry, The University Press, Cambridge.
19. Houcks M.M. (2009). Identification of Textile Fibers, Woodhead Publishing Limited, Oxford.
20. Hongu T., Phillips G.O. (1997). New Fibers, Woodhead Publishing Limited, Cambridge.
21. Alagirusamy R., Das A. (2010). Technical Textile Yarns, Woodhead Publishing Limited, Cambridge.
22. Fred W., Billmeyer J. (1984). Textbook of Polymer Science, Wiley, New York.
23. Hall C. (1989). Polymer Materials, Macmillan Education Ltd, London.
24. Hearle J.W., Morton W.E. (2008). Physical Properties of Textile Fibres, CRC Press, Cambridge.
25. Eichhorn S.J., Hearle, J.W.S., Jaffe, M., Kikutani, T. (2009). Handbook of Textile Fibre Structure, Woodhead Publishing Limited, Cambridge.
26. Çelikkanat A.B. (2002). Teknik Tekstiller, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, İstanbul.
27. Module 2. High Strength High Modulus Fibres, http://nptel. ac.in/courses/116102006/6, (Aralık 2014)
28. Peacock A. (2000). Handbook of Polyethylene: Structures: Properties, and Applications, CRC Press, New York.
29. Jones C.E. (2011). Encyclopedia of Polymer Research, Nova Science Publishers, New York.
30. Blackburn R.S. (2009). Sustainable Textiles: Life Cycle and Environmental Impact, Elsevier, Cambridge.
31. Joseph M.L., Hudson P.B., Clapp A.C., Kness D. (1993). Joseph’s Introductory Textile Science, Harcourt Brace Javanovich College Publishers.
32. Yumak N., Pekbey Y., Aslantaş K. (2013). Zırh Tasarımında Kullanılan Kompozit Malzemelerin Deformasyon Karakteristiğinin Araştırılması, Makine Teknolojileri Elektronik Dergisi, 10, (4), 1-21.
33. Jacobs M. (1999). Creep of Gel-Spun Polyethylene Fibres, Ph. D. Thesis, Eindhoven University of Technology, Eindhoven,
34. Elsasser V.H. (2005). Textiles: Concepts and Principles, Fairchild Publications, Inc., New York.
35. Gupta V., Kothari V. (1997). Manufactured Fibre Technology, Chapman and Hall, London.
36. Schlomski J., Garus B., Sprunk J. (2003). Textile Product for Use in Orthopedic Technology, US 20030194935 A1.
37. Hongu T., Takigami M., Phillips G. (2005). New Millennium Fibers, Woodhead Publishing Limited, Cambridge.
38. El Mogahzy Y. (2008). Engineering Textiles: Integrating the Design and Manufacture of Textile Products, Woodhead Publishing, Cambridge.
39. Karakan G. (2008). Yüksek Performanslı Liflerin Balistik Amaçlı Kullanımı, Tekstil Teknolojileri E-Dergi, (2), 6773.
40. Shahkarami S., Macneil J., Krummel J., Rayner K., Pritchard L. (2009). Coated Multi-Threat Materials and Methods for Fabricating the Same, EP 2129826 A1.
41. Technical Yarns: Characteristics of Technical Filament Yarns, http://textilefashionstudy.com/technical-yarnscharacteristics-of-technical-filament-yarns/, (ocak 2015)
42. Holland J.E., Holland C.W. (2010).Thermoplastic EthyleneVinyl Acetate Film Bonded to a High Molecular Weight Polyethylene Fabric; and a Polyethylene Outer Film Surface Will Not Degrade, Become Tack or Soft; High Performance Cable and Rope Covers, Hovercraft Curtains, Gun and Boat Covers, Gloves, and Aprons, US 20100068963 A1.
43. Fung W., Hardcastle M. (2001). Textiles in Automotive Engineering, Woodhead Publishing, Cambridge.
44. Jackson D., Shepheard B., Kebadze E., Teles R., Rossi R., Gonçalves R. (2005). Cfrp Mooring Lines for Modu Applications, Proceedings of Offshore Technology Conference, Houston,
45. Brady E., Razavi M., Vale D., O’shaughnessy J. (2010). Clot Capture Systems and Associated Methods, US 8777976 B2.
46. Fakirov S. (2013). Nano‐and Microfibrillar Single‐Polymer Composites: A Review, Macromolecular Materials and Engineering, 298, (1), 9-32.
47. Doğan M., Şeyhoğlu H. (2013). Film İstifleme Yöntemiyle Tek Bileşenli Polimer Kompozit Malzeme Üretimi, Tekstil ve Mühendis, 20, (90), 53-62.
48. Kaypla, http://www.nextrusion.de/en/search/kaypla/news/ summary.html, (Şubat 2015)
49. Bartusch M., Hund R.D., Hund H., Cherif C. (2014). Surface Functionalisation of Uhmw Polyethylene Textile with Atmospheric Pressure Plasma, Fibers and Polymers, 15, (4), 736-743.
50. Yi R. (2010). The Properties and Applications of UltraHigh Molecular Weight Polyethylene Fibre, Guangzhou Chemical Industry, 8, 031.
51. Silverstein M.S., Breuer O., Dodiuk H. (1994). Surface Modification of UHMWPE Fibers, Journal of Applied Polymer Science, 52, (12), 1785-1795.
52. Chiu H.-T., Wang J.-H. (1998). The Relationship between Zeta-Potential and Pull-out Shear Strength on Modified UHMWPE Fiber Reinforced Epoxy Composites, Polymer composites, 19, (4), 347-351.
53. Yifeng L. (1999). General Situation of World’s Ultra High Molecular Weight Polyethylene Fiber and Some Suggestions, Hi-Tech Fiber & Application, 5, 001.
54. Shishoo R. (2005). Textiles in Sport, Woodhead Publishing Limited, Cambridge.
55. Callister W.D., Rethwisch D.G. (2013). Fundamentals of Materials Science and Engineering, John Wiley & Sons.
56. Elices M., Llorca J. (2002). Fiber Fracture, Elsevier Science Ltd., Oxford.
57. Ohta S., Sakamoto M., Iwakura S., Shirasaki Y., Yoshida I. (1991). Speaker Diaphragm, US 5,031,720.
58. Balcı H. (2006). Akıllı (Fonksiyonel) Tekstiller, Seçilmiş Kumaşlarda Antibakteriyel Apre Ve Performans Özellikleri, Yüksek Lisans, Çukurova Üniversitesi, Adana.
59. Kelly A., Zweben C.H. (2000). Comprehensive Composite Materials, Elsevier.
60. Çay A., Süpüren G., Kanat Z.E., Gülümser T., Tarakçıoğlu I. (2007). Balistik Lifler (Bölüm 1), Tekstil ve Konfeksiyon, 4, 232-236.
61. Sengonul A., Wilding M.A. (1995). Modelling of Time Dependence in Ultra-High-Modulus Polyethylene Based on Raman Microscopy, Polymer, 36, (23), 4379-4384.
62. Goswami B.C., Anandjiwala R.D., Hall D. (2004). Textile Sizing, CRC Press, New York.
63. Ulcay Y., Altun Ş., Baycan İ. (2010). Radiation Effects on the Tenacity of Novoloid, Aramid and Polyethylene Fibers, Uludağ University Journal of The Faculty of Engineering, 15, (1).
64. Long A.C. (2005). Design and Manufacture of Textile Composites, Elsevier, Cambridge.
65. İcemax, http://www.toyobo-global.com/seihin/dn/ dyneema/youto/textile.htm, (Şubat 2015)
66. Hashmi S., Dwivedi U., Chand N. (2006). Friction and Sliding Wear of UHMWPE Modified Cotton Fibre Reinforced Polyester Composites, tribology letters, 21, (2), 79-87.
67. Cao S., Liu H., Ge S., Wu G. (2011). Mechanical and Tribological Behaviors of UHMWPE Composites Filled with Basalt Fibers, Journal of reinforced plastics and composites, 30, (4), 347-355.
68. Wang Y., Cheng R., Liang L., Wang Y. (2005). Study on the Preparation and Characterization of Ultra-High Molecular Weight Polyethylene–Carbon Nanotubes Composite Fiber, Composites Science and Technology, 65, (5), 793-797.
69. Ping H., Shoushan F., Jianwei W. (1998). Study on Carbon Nanotube/UHMWPE Composite, Engineering Plastics Application, 1.
70. Nwabunma D., Kyu T. (2008). Polyolefin Composites, John Wiley & Sons, New Jersey.
71. Ruan S., Gao P., Yu T.X. (2006). Ultra-Strong Gel-Spun UHMWPE Fibers Reinforced Using Multiwalled Carbon Nanotubes, Polymer, 47, (5), 1604-1611
72. Aydın Ö., Günaydın G.K. (2014). Elektromanyetik Kalkanlama Amaçlı Koruyucu Tekstiller, AKDENIZ SANAT DERGİSİ, 4, (7).
73. Cuben Fiber, http://en.wikipedia.org/wiki/Cuben_Fiber, (Şubat 2015)
74. Wa-Ben Cuben Fiber Wallet, http://sticksblog. com/2011/08/20/wa-ben-cuben-fiber-wallet/, (Şubat 2015)
75. Mojo Ufo Cuben Fiber Tent, http://www.dudeiwantthat. com/outdoors/camping/mojo-ufo-cuben-fiber-tent.asp, (Şubat 2015)
76. Zpacks Waterproof/Breathable Cuben Fiber Rain Mitts, http://sticksblog.com/2012/12/09/zpackswaterproofbreathable-cuben-fiber-rain-mitts/, (Şubat 2015)
77. Race Series 780 Cuben Fiber, http://no.northsails.com/ tabid/26335/Default.aspx, (Şubat 2015)
78. Cuben Fiber Keeps the Weight Down, http://www. gizmag.com/terra-strenua-nyx-ultralight-collapsible-cotchair/21446/pictures#1, (Şubat 2015)
79. Zpacks Waterproof Breathable Cuben Fiber Rain Pants, http://www.trailspace.com/gear/zpacks/waterproofbreathable-cuben-fiber-rain-pants/, (Şubat 2015)
80. Cc Snowshoes (Carbon Fiber/Cuben Fiber), http:// www.suluk46.com/RandD%20-%20RD13%20CC%20 Snowshoes.html, (Şubat 2015)
81. Cuben Fiber Poncho, http://www.mountainlaureldesigns. com/shop/product_info.php?cPath=37&products_id=56, (Şubat 2015)
82. Cuben Fiber Backpack, http://geared.jp/editors/2013/04/ cuben-fiber-backpac.html, (Şubat 2015)
83. Airship, http://en.wikipedia.org/wiki/Airship, (Mart 2015)
84. Doğan O.M., Karacaer Ö., Tinçer T. (2005). Silanla Kaplanan Ve Gamma ışını Uygulanan Çok Yüksek Molekül Ağırlıklı Polietilen Örgü Fiberle Güçlendirilen Akrilik Rezinlerin Bükülme Dayanıklılığı, Gazi Üniversitesi Diş Hekimliği Fakültesi Dergisi, 22, (3), 147.
85. Advanced Fibers and Composites, http://www.honeywelladvancedfibersandcomposites.com/, (Şubat 2015)
86. Dyneema Purity® Membrane, http://www.dsm.com/ markets/medical/en_US/products-page/products-uhmwpefibers/dyneema-purity-membrane.html, (Şubat 2015)
87. Laird J. Materials and Coatings That Go One Step Beyond, http://medicaldesign.com/materials/materials-andcoatings-go-one-step-beyond, (Şubat 2015)
88. Specialty Suture, https://www.arthrex.com/shoulder/ specialty-suture, (Mart 2015)
89. Implantable-Grade Fiber Comes in Colors Everywhere, http://www.qmed.com/mpmn/article/implantable-gradefiber-comes-colors-everywhere, (Mart 2015)
90. Polymers in Sutures Heal Wounds Faster, https://www. polymersolutions.com/blog/polymers-in-sutures-healwounds-faster/, (Mart 2015)
91. Wound Closed with Surgical Sutures, http://commons. wikimedia.org/wiki/File:Wound_closed_with_surgical_ sutures.jpg, (Mart 2015)
92. http://www.tradeindia.com/fp660355/Silver-Stump-Socks. html, (Mart 2015)
93. Knit-Rite, http://www.knitrite.com/, (Mart 2015)
94. Use of Dyneema Purity® Fiber in Acl Repair, https://www. youtube.com/watch?v=txcLFTnGMuQ, (Şubat 2015)
95. Gemci R. (2011). Tarım Teknik Tekstilleri (Agrotech), Teknik Tekstil 2011: Frankfurt Fuarı Teknolojik Değerlendirme Raporu, Bursa.
96. Ön Çapraz Bağ Yaralanmaları, http://www.beyzadeoglu. com/tr/guide/on-capraz-bag-yaralanmalari, (Şubat 2015)
97. Applications, http://www.dsm.com/products/dyneema/en_ GB/applications.html, (Şubat 2015)
98. Arts C. Better Support for the Scoliosis Patient with New Technology and Dyneema Purity®, http:// www.bmm-program.nl/site/public/go/article. aspx?id=85&title=Scoliosis, (Şubat 2015)
99. Karakan G. (2009). Teknik Tekstillerin Koruyucu Yapılarda Kullanımı, Tekstil Teknolojileri Elektronik Dergisi, 3, (1), 65-70.
100. Mecit D., Ilgaz S., Duran D., Başal D., Gülümser T., Tarakçıoğlu I. (2007). Teknik Tekstiller Ve Kullanım Alanları (Bölüm 2), Tekstil ve Konfeksiyon, 17, (3), 154161.
101. Dimeski D., Bogoeva-Gaceva G., Srebrenkoska V. Ballistic Properties of Polyethylene Composites Based on Bidirectional and Unidirectional Fibers, Rad saopsten na IX Simpozijumu 184-191, 21-22 October 2011, Lekovac. Faculty of Technology in Leskovac.
102. Hockenberger A.S. (1998). The Effects of Weaving on Fibre Performance in Ballistic Fabrics Made from HighPerformance Polyethylene Fibres, The Journal of The Textile Institute, 89, (3), 595-604.
103. Bozdoğan F., Üngün S., Temel E., Mengüç G.S. (2015). Balistik Koruma Amaçlı Kullanılan Tekstil Materyalleri, Özellikleri Ve Balistik Performans Testleri, Tekstil ve Mühendis, 22, (98).
104. Tao L.Z.Z.Q.W., Guanxiong Q. (2002). A Study on Ballistic Performance and Mechanism of UHMWPE Fiber/ Ldpe Composites, Fiber Composites, 4, 001.
105. Portable Dyneema Bulletproof / Ballistic Shield, http:// www.fuzing.com/vli/002391de6279/Portable-Dyneemabulletproof-%7C-ballistic-shield, (Şubat 2015)
106. Williams J.T. (2009). Textiles for Cold Weather Apparel, Woodhead Publishing Limited, Cambridge.
107. Diverse Protection, http://www.soldiermod.com/ summer-08/industry-dsm.html, (Şubat 2015)
108. Preventing Head Trauma – Designing the Next Generation of Soldier Helmets, http://www.army-technology.com/ features/featurepreventing-head-trauma-soldier-helmetsarmy/, (Şubat 2015)
109. Body Armor Suites, http://defense-update.com/features/du2-07/infantry_armor.htm, (Şubat 2015)
110. Polar Bear (R) Plus Cut-Resistant Spectra (R) Glove, http:// www.butcher-packer.com/index.php?main_page=product_ info&products_id=906, (Şubat 2015)
111. Brown A. New Options in Personal Ballistic Protection, http://www.compositesworld.com/articles/new-options-inpersonal-ballistic-protection, (Şubat 2015)
112. Reinforcing Material, https://www.dropbox.com/ s/9zac9rusehchylc/09.02.2015-HPPE%20-%20Copy. docx?dl=0, (Şubat 2015)
113. Thomas G.P. Materials Used in Formula One (F1) Cars, http://www.azom.com/article.aspx?ArticleID=8194, (Şubat 2015)
114. Motorcycle Helmet - Blue, http://www.bikerperformance. com/icon-airframe-carbon-fiber-rr-full-face-motorcyclehelmet-blue-p12974.html, (Şubat 2015)
115. How Did Surgeons Get Cyclist Awang’s Splinter Out?, http://news.bbc.co.uk/sport2/hi/other_sports/ cycling/9404458.stm, (Şubat 2015)
116. Safer in the Saddle with Dyneema®, https://www.youtube. com/watch?v=43tK_5xuG5I, (Şubat 2015)
117. Melnykowycz M. Discovering the Pleasure of Running, http://www.dromeus.com/mammut-2013-trail-runningshoe-preview/, (Şubat 2015)
118. Howard B.C. Can New Shark-Resistant Nets Spur Responsible Aquaculture?, http://voices. nationalgeographic.com/2013/08/19/can-new-sharkresistant-nets-spur-responsible-aquaculture/, (Şubat 2015)
119. Fish Farm Nets, http://fis.com/fis/tradingmarket/Read.asp ?sector=aquaculture&id=18383&id_reply=18383&image= &scrollaction=&monthyear=&day=&l=e, (Şubat 2015)
120. Xia P., Xinghua Z., Suling D., Liping H. (2004). Research Progress of Ultrahigh Strength High-Modulus Polyethylene Fiber and Its Composites, China Synthetic Fiber Industry, 4, 019.
121. Said M., Dingwall B., Gupta A., Seyam A., Mock G., Theyson T. (2006). Investigation of Ultra Violet (Uv) Resistance for High Strength Fibers, Advances in Space Research, 37, (11), 2052-2058.
122. Biron M. (2003). Thermosets and Composites: Technical Information for Plastics Users, Elsevier Advanced Technology, Oxford.
123. Formula 1 Takvimi Açıklandı, http://onedio.com/haber/ formula-1-takvimi-aciklandi-214462, (Şubat 2015)
124. 2010 World Touring Car Championship Season, http:// en.wikipedia.org/wiki/2010_World_Touring_Car_ Championship_season, (Şubat 2015)
125. Air Force ‘Slows’ Speed with No. 2 Indy Car, http:// airforcelive.dodlive.mil/2009/04/air-force-slows-speedwith-indy-car/, (Şubat 2015)
126. New Gleistein Ropes Products with Latest Dyneema Sk90 Fibres, http://www.gleistein.com/en-new-gleistein-ropesproducts-with-latest-dyneema-sk90-fibres-2-press/, (Şubat 2015)
127. Dyneema Fibre to Provide Strength to Levis 501 Jeans, http://www.fibre2fashion.com/news/garment-companynews/newsdetails.aspx?news_id=154276, (Şubat 2015)
128. Sourcing Dyneema’s Super Strength: An Interview with Ls&Co. Fabric Innovator Neil Bell, http://www.levistrauss. com/unzipped-blog/2014/01/sourcing-dyneema-s-superstrength-interview-ls-co-fabric-innovator-neil-bell/, (Şubat 2015)
129. Dyneema Cut Resistant / Knife Proof Cloth T-Shirt, http:// www.alibaba.com/product-detail/Dyneema-Cut-ResistantKnife-Proof-cloth_120105032.html, (Şubat 2015)
130. Stopping a Tsunami a Membrane Tsunami Float Barrier Concept with Dyneema®, https://www.youtube.com/ watch?v=0eFU4KIezSc, (Şubat 2015)
131. Zhi-jun L. (2000). The High-Powered UHMWPE Fiber and It′ S Applications Foreground in Ground Radome, Hi-Tech Fiber & Application, 4, 004.
132. Lee S.M., Lee S. (1992). Handbook of Composite Reinforcements, Wiley-VCH, California.
133. Liu H., Ji H., Wang X. (2013). Tribological Properties of Ultra-High Molecular Weight Polyethylene at Ultra-Low Temperature, Cryogenics, 58, 1-4.
134. Kriyojenik, http://tr.wikipedia.org/wiki/Kriyojenik, (Mart 2015)
135. Hand Built Humanoid Robots, Part1: Introduction, http:// www.instructables.com/id/Android-AnthropomimeticHumanoid-Robot/, (Şubat 2015)
136. Radome, http://en.wikipedia.org/wiki/Radome, (Mart 2015)
137. Radomes, http://www.rf-mw.org/antennas_antenna_ radomes_antenna_radomes.html, (Mart 2015)
138. Saenz A. Dlr Robot Hand Is Tough Enough to Withstand a Hammer (Video), http://singularityhub.com/2011/01/31/ dlr-robot-hand-is-tough-enough-to-withstand-a-hammervideo/, (Şubat 2015)
139. The Making of Unnumbered Sparks, https://www.youtube. com/watch?v=npjTmG-TBHQ&feature=youtu.be, (Şubat 2015)
140. Echelman J. Spectra® Fiber Strengthens 745-Foot Vancouver Sculpture by World-Renowned Artist, http:// www.honeywell-advancedfibersandcomposites.com/ strength-of-spectra/, (Şubat 2015)
141. Turner T. Lb Room, http://www.yankodesign. com/2011/03/18/16-5-lb-room/, (Şubat 2015)
142. Lin S.P., Han J.L., Yeh J.T., Chang F.C., Hsieh K.H. (2007). Surface Modification and Physical Properties of Various UHMWPE-Fiber-Reinforced Modified Epoxy Composites, Journal of Applied Polymer Science, 104, (1), 655-665.
143. Chiu H.T., Wang J.H. (1998). Dynamic Mechanical Properties of the Chemical Oxidation on UHMWPE Fibers for Improved Adhesion to Epoxy Resin Matrix, Journal of Applied Polymer Science, 68, (9), 1387-1395.
144. Yaman N., Özdoğan E., Seventekin N., Öktem T. (2008). Tekstil Liflerinin Adhezyonunu Geliştirmek İçin Yüzey Modifikasyon Yöntemleri, Tekstil ve Konfeksiyon, 2, 8993.
145. Mattila H.R. (2006). Intelligent Textiles and Clothing Woodhead Publishing Limited, Cambridge.
146. Çerkez İ., Ulcay Y. Kolloidal Silika Dispersiyonunun Polietilen Dokusuz Yüzeyin Enerji Absorbsiyonuna Olan Etkisi, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 12, (2), 71-84.
147. Oosterom R., Ahmed T., Poulis J., Bersee H. (2006). Adhesion Performance of UHMWPE after Different Surface Modification Techniques, Medical engineering & physics, 28, (4), 323-330.
148. Wang J., Liang G., Zhao W., Lü S., Zhang Z. (2006). Studies on Surface Modification of UHMWPE Fibers Via Uv Initiated Grafting, Applied Surface Science, 253, (2), 668-673.
149. Kondo Y., Miyazaki K., Yamaguchi Y., Sasaki T., Irie S., Sakurai K. (2006). Mechanical Properties of Fiber Reinforced Styrene–Butadiene Rubbers Using SurfaceModified UHMWPE Fibers under Eb Irradiation, European Polymer Journal, 42, (5), 1008-1014.
150. [150] Muraoka Y., Rich M.J., Drzal L.T. (2002). Sulfonation of Uhmw-Pe Fibers for Adhesion Promotion in Epoxy Polymers, Journal of Adhesion Science and Technology, 16, (12), 1669-1685.
151. [151] Zhang Y., Shi F., He J., Wu H., Qiu Y. (2010). Surface Characterization of Oxygen Plasma Treated Nano-Sio2 Sol-Gel Coating UHMWPE Filaments, Materials Science Forum, 658, 117-120.
152. [152] Anna L.Y.H.F.Z., Xuqin W. (1998). Surface Modification of Ultra-High Molecular Polyethylene Fibers FIBER REINFORCED PLASTICS/COMPOSITE, 5.
153. [153] Enomoto I., Katsumura Y., Kudo H., Soeda S. (2011). Graft Polymerization Using Radiation-Induced Peroxides and Application to Textile Dyeing, Radiation Physics and Chemistry, 80, (2), 169-174.
154. [154] Zheng Z., Tang X., Shi M., Zhou G. (2004). Surface Modification of Ultrahigh‐Molecular‐Weight Polyethylene Fibers, Journal of Polymer Science Part B: Polymer Physics, 42, (3), 463-472.
155. [155] Ogawa T., Mukai H., Osawa S. (2001). Improvement of the Mechanical Properties of an Ultrahigh Molecular Weight Polyethylene Fiber/Epoxy Composite by Corona-Discharge Treatment, Journal of Applied Polymer Science, 79, (7), 1162-1168.
156. [156] Gao S., Zeng Y. (1993). Surface Modification of Ultrahigh Molecular Weight Polyethylene Fibers by Plasma Treatment. I. Improving Surface Adhesion, Journal of Applied Polymer Science, 47, (11), 2065-2071.
157. [157] Gao S., Zeng Y. (1993). Surface Modification of Ultrahigh Molecular Weight Polyethylene Fibers by Plasma Treatment. Ii. Mechanism of Surface Modification, Journal of Applied Polymer Science, 47, (12), 2093-2101.
158. [158] Chaoting Y., Gao S., Mu Q. (1993). Effect of LowTemperature-Plasma Surface Treatment on the Adhesion of Ultra-High-Molecular-Weight-Polyethylene Fibres, Journal of Materials Science, 28, (18), 4883-4891.
159. [159] Yim J.H., Palmese G.R., Kissounko D.A., Abu-Obaid A., Gillespie Jr J.W., Pappas D.D., Fridman A. Effect of Interfacial Strength and Energy Absorption of PlasmaModified Uhmw-Pe Fiber/Epoxy Interface, International SAMPE Symposium and Exhibition (Proceedings), 2009.
160. [160] Wang T., Wang C., Qiu Y. (2008). Surface Modification of Ultra High Modulus Polyethylene Fibers by an Atmospheric Pressure Plasma Jet, Journal of Applied Polymer Science, 108, (1), 25-33.
161. [161] Moon S.I., Jang J. (1999). The Effect of the Oxygen-Plasma Treatment of UHMWPE Fiber on the Transverse Properties of UHMWPE-Fiber/Vinylester Composites, Composites Science and Technology, 59, (4), 487-493.
162. [162] Sheng J. (2007). Properties of Plasma Treated UHMWPE/ Ldpe Composites, Journal of Textile Research, 9, 016.
163. [163] Shishoo R. (2007). Plasma Technologies for Textiles, Elsevier, Cambridge.
164. [164] Rauscher H., Perucca M., Buyle G. (2010). Plasma Technology for Hyperfunctional Surfaces: Food, Biomedical and Textile Applications, John Wiley & Sons.
165. [165] Teodoru S., Kusano Y., Rozlosnik N., Michelsen P.K. (2009). Continuous Plasma Treatment of Ultra-HighMolecular-Weight Polyethylene (UHMWPE) Fibres for Adhesion Improvement, Plasma Processes and Polymers, 6, (SUPPL. 1), S375-S381.
166. [166] Yim J.H., Pappas D., Kissounko D., Fridman A., Palmese G.R. Interfacial Shear Strength Studies of Plasma-Treated Ultra-High Molecular Weight Polyethylene Fibers, AIChE 100 - 2008 AIChE Annual Meeting, Conference Proceedings, 2008.
167. [167] Yim J.H., Pappas D., Fridman A., Palmese G.R. (2008). Surface Modification of Uhmw-Pe Fibers Using Atmospheric Plasma, 52nd International SAMPE Symposium - Material and Process Innovations: Changing our World, California,
168. [168] Zhang Y., Yu J., Chen L., Zhu J., Hu Z. (2009). Surface Modification of Ultrahigh-Molecular-Weight Polyethylene Fibers with Coupling Agent During Extraction Process, Journal of Macromolecular Science, Part B: Physics, 48, (2), 391-404.
169. [169] Yamanaka A., Izumi Y., Kitagawa T., Terada T., Hirahata H., Ema K., Fujishiro H., Nishijima S. (2006). The Effect of Γ-Irradiation on Thermal Strain of High Strength Polyethylene Fiber at Low Temperature, Journal of Applied Polymer Science, 102, (1), 204-209.
170. [170] Karahan H.A., Demir A., Özdoğan E., Öktem T., Seventekin N. (2007). Tekstil Malzemelerinin Yüzey Modifikasyonlarında Kullanılan Bazı Yöntemler Tekstil ve Konfeksiyon, 4, 248-255.
171. [171] Bartusch M., Hetti M., Pospiech D., Riedel M., Meyer J., Toher C., Neu V., Gazuz I., Shagolsem L.S., Sommer J.U., Hund R.D., Cherif C., Moresco F., Cuniberti G., Voit B. (2014). Innovative Molecular Design for a Volume Oriented Component Diagnostic: Modified Magnetic Nanoparticles on High Performance Yarns for Smart Textiles, Advanced Engineering Materials, 16, (10), 1276-1283.
172. [172] Kim T., Jeon S., Kwak D., Chae Y. (2012). Coloration of Ultra High Molecular Weight Polyethylene Fibers Using Alkyl-Substituted Anthraquinoid Blue Dyes, Fibers and Polymers, 13, (2), 212-216.
173. [173] Kim T., Jeon S. (2013). Coloration of Ultra High Molecular Weight Polyethylene Fibers Using Alkyl-Substituted Monoazo Yellow and Red Dyes, Fibers and Polymers, 14, (1), 105-109.
174. [174] Henssen G.J.I., Verdaasdonk P. (2015). Process to Enhance Coloration of UHMWPE Article, the Colored Article and Products Containing the Article, US Patent 20,150,018,482.
175. [175] Bae J.-s., Kim T., Lee C. (2014). Synthesis of Novel Violet Dyes for Polyolefin Fibers Using N, N-Dihexyl-2Methoxy-5-Methylaniline and Various Diazo Components, Fibers and Polymers, 15, (12), 2466-2471.