S235JR Çeliğinin Tornalanması Sırasında Yağ Püskürtme Yönteminin İşlenebilirlik Özellikleri Üzerindeki Tribolojik Performansının Araştırılması

Öz

Tornalamadaki ana zorluklar, işlenmiş parçanın kalitesi ve takım maliyetidir. Bu nedenle, daha az işleme süresi ve maliyeti ile bitmiş üründe istenen kaliteyi elde etmek için tornalama işlemlerinde uygun ideal işleme parametreleri seçilmelidir. Bu çalışmanın amacı, verimli talaş kaldırma ve istenilen yüzey kalitesini elde etmek için kesme hızı, ilerleme hızı, kesme derinliği ve takım malzemesinin doğru birleşimini bulmayı içerebilecek, ısıl işlem uygulanmayan S235JR düşük karbonlu çelik için ideal işleme koşullarını belirlemektir. Tam faktöriyel yöntemle tasarlanan deneysel çalışma, kuru ve MQL kesme ortamı koşullarında 2 faktörlü kesme hızı ve ilerlemenin 2 seviyesi seçilerek gerçekleştirilmiştir. Bu çalışmanın sonuçları yağ püskürtme tekniğinin S235JR çeliğinin düşük yüzey kalitesi, yüksek kesme sıcaklığı ve kesme kuvveti açısından işlenebilirlik zorluklarının üstesinden gelebildiğini göstermiştir.

Anahtar Kelimeler

• Kesme kuvveti
• Kesme sıcaklığı
• Yüzey pürüzlülüğü

Exploring the Tribological Performance of Mist Lubrication Technique on Machinability Characteristics During Turning S235JR Steel

Öz

The main challenges in turning are the quality of the machined part and the cost of tooling. Therefore, optimum machining parameters suitable for turning operations should be selected to achieve the desired quality of the finished product with reduced machining time and cost. The aim of this study is to determine the optimum machining conditions for S235JR low carbon steel without heat treatment, which could include finding the right combination of cutting speed, feed rate, depth of cut and tool material to achieve efficient material removal and desired surface finish. The experimental study, designed with the full factorial method, was carried out with 2 factors of cutting speed and feed rate with selected 2 levels under dry and MQL cutting environment conditions. Results of this study showed that mist lubricating technique overcome the machinability challenges of S235JR steel in terms of low surface quality and high cutting temperature and cutting force.

Anahtar Kelimeler

• Cutting force
• Cutting temperature
• Surface roughness

Kaynakça

1. M. Armağan, Cutting of St37 Steel plates in stacked form with abrasive water jet, Materials and Manufacturing Processes, 36(11): 1305-1313, 2021.
2. A. Siti Noradila, N. Sazali, A mini review on low carbon steel in rapid cooling process, Journal of Advanced Research in Materials Science, 68(1): 1-7, 2020.
3. İ. Gürkan, Study of the microstructure and mechanical property relationships of shielded metal arc and tıg welded s235jr steel joints, Materials Science and Engineering: A, 830: 2022.
4. G.V. Mnerie, H.F. Dașcău, I. Duma, E, Dobrin, Assessment of the hardness at the microstructural level in welded connections formed using 316l and s235 materials, Nonconventional Technologies Review/Revista de Tehnologii Neconventionale, 27(4): 82-87, 2023.
5. G. Ingarao, Manufacturing strategies for efficiency in energy and resources use: The role of metal shaping processes, Journal of Cleaner Production, 142(4): 2872-2886, 2017.
6. M. Garetti, M. Taisch, Sustainable manufacturing: trends and research challenges, Production planning & control, 23(2-3): 83-104, 2012.
7. S.A. Lawal, I.A. Choudhury, Y. Nukman, A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant, Journal of Cleaner Production, 41: 210-221, 2013.
8. M. Sarıkaya, V. Yılmaz, A. Güllü, Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy, Journal of Cleaner Production, 133: 172-181, 2016.

9. Z. Said, M. Gupta, H. Hegab, N. Arora, A.M. Khan, M. Jamil, E. Bellos, A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids, The International Journal of Advanced Manufacturing Technology, 105: 2057-2086, 2019.
10. S. Lei, S. Devarajan, Z. Chang, A study of micropool lubricated cutting tool in machining of mild steel, Journal of materials processing technology, 209 (3): 1612-1620, 2009.
11. X. Wang, C. Li, Y. Zhang, W. Ding, M. Yang, T. Gao, H. Cao, X. Xu, D. Wang, Z. Said, Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives, Journal of Manufacturing Processes, 59: 76-97, 2020.
12. V.S. Sharma, M. Dogra, N. Suri, Cooling techniques for improved productivity in turning, International Journal of Machine Tools and Manufacture, 49(6): 435-453, 2009.
13. A. Tayal, N.S. Kalsi, M.K. Gupta, Machining of superalloys: A review on machining parameters, cutting tools, and cooling methods, Materials Today: Proceedings, 43: 1839-1849, 2021.
14. S. Debnath, M.M. Reddy, Q.S. Yi, Environmental friendly cutting fluids and cooling techniques in machining: a review, Journal of cleaner production, 83: 33-47, 2014.
15. S. Ghosh, P.V. Rao, Application of sustainable techniques in metal cutting for enhanced machinability: a review, Journal of Cleaner Production, 100: 17-34, 2015.
16. S. Chinchanikar, S. Choudhury, Machining of hardened steel-experimental investigations, performance modeling and cooling techniques: a review, International Journal of Machine Tools and Manufacture, 89: 95-109, 2015.
17. M. Stanford, P.M. Lister, K.A. Kibble, Investigation into the effect of cutting environment on tool life during the milling of a BS970-080A15 (En32b) low carbon steel, Wear, 262 (11-12): 1496-1503, 2007.
18. T.C. Yap, C. Sivaraos, C. Lim, J. Leau, Surface roughness and cutting forces in cryogenic turning of carbon steel, Journal of Engineering Science and Technology, 10(7): 911-920, 2015.
19. M. Stanford, P.M. Lister, Investigation into the relationship between tool‐wear and cutting environments when turning EN32 steel, Industrial Lubrication and Tribology, 56(2): 114-121, 2004.
20. N. Khanna, C. Agrawal, M.K. Gupta, Q. Song, A.K. Singla, Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hybrid machining technology, Journal of cleaner production, 263: 121402, 2020.
21. M.Y. Tsai, C.T. Chang, J.K. Ho, The machining of hard mold steel by ultrasonic assisted end milling, Applied Sciences, 6(11): 373, 2016.
22. K. Venkatesan, R. Ramanujam, P. Kuppan, Laser assisted machining of difficult to cut materials: research opportunities and future directions-a comprehensive review, Procedia Engineering, 97: 1626-1636, 2014.
23. L.C. Florez Garcia, H.A. Gonzalez Rojas, A.J. Sanchez Egea, Estimation of specific cutting energy in an s235 alloy for multi-directional ultrasonic vibration-assisted machining using the finite element method, Materials, 13(3): 567, 2020.
24. J.D. Kechagias, K.-E. Aslani, N.A. Fountas, N.M. Vaxevanidis, D.E. Manolakos, A comparative investigation of Taguchi and full factorial design for machinability prediction in turning of a titanium alloy, Measurement, 151: 107213, 2020.
25. ISO 3685, Tool-life testing with single-point turning tools, ISO, 1993.
26. P.G. Benardos, G.C. Vosniakos,, Predicting surface roughness in machining: a review, International journal of machine tools and manufacture, 43(8): 833-844, 2003.
27. J.R. Davis, Metals handbook: desk edition, ASM international, 1998.
28. S. Sun, M. Brandt, M. Dargusch, Thermally enhanced machining of hard-to-machine materials—a review, International Journal of Machine Tools and Manufacture, 50(8): 663-680, 2020.
29. H. Demirpolat, R. Binali, A.D. Patange, S.S. Pardeshi, S. Gnanasekaran, Comparison of tool wear, surface roughness, cutting forces, tool tip temperature, and chip shape during sustainable turning of bearing steel, Materials, 16(12): 4408, 2023.