AND APPLYING THE JUSTIFICATION ISOTHERMAL SYSTEM IN TEACHING CHEMISTRY

Öz

For the complete definition of the properties of the ternary Bi–Cu–In system,there were performed the investigation of micro structures, hardness by Brinel alloys. In the range of this ternary system, numerous alloys were tested for three vertical sections, with molar ratio Sb: Cu= 1, Cu:In= 1, Sb:In=.1. By application of CALPHAD method, and software package PANDAT 8.1, there were calculated the isothermal cross section at 25⁰C and 400⁰C.

Anahtar Kelimeler

• Bi–Cu–In ternary system,microstructure,hardness,isothermal sections

Kaynakça

1. [1] Liu, W.E., Mohney, S.E., Condensed Phase Equilibria in Transition Metal-In-Sb Systems and Predictions for Thermally Stable Contacts to InSb, Mater. Sci. Eng. B 103, 2003, p. 189-201.
2. [2] Dinsdale, A.T., Kroupa, A., Vízdal, J., Vrestal, J., Watson, A., Zemanova, A., COST531 Database for Lead-free Solders, Ver. 2.0, 2006, (unpublished research).
3. [3] Saunders, N., Miodownik, A.P., CALPHAD (A Comprehensive Guide), Elsevier, London, 1998.
4. [4] Liu, X.J., Liu, H.S., Ohnuma, I., Kainuma, R., Ishida, K., Itabashi, S., Kameda, K., Yamaguchi, K., Experimental determination and thermodynamic calculation of the phase equilibria in the Cu-In-Sn system. Journal of Electronic Materials, vol. 30, no. 9, 2001, p. 1093-1103.
5. [5] Liu, X.J., Wang, C.P., Ohnuma, I., Kainuma, R., Ishida, K., Thermodynamic assessment of the phase diagrams of the Cu-Sb and Sb-Zn systems, Journal of Phase Equilibria, vol. 21, no. 5, 1 october 2000 , p. 432-442.
6. [6] Chatillon, I., Ansara, C., Lukas, H.L., Nishizawa, T., Ohtani, H., Ishida, K., Hillert, M., Sundman, B., Argent, B.B., Watson, A., Chart, T.G., Anderson, T., A binary database for III-V compound semiconductor systems, CALPHAD, vol. 18, 1994, p. 177-222.
7. [7] Manasijevic, D., Minic, D., Zivkovic, D., Vrestál, J., Aljilji, A., Talijan, N., Stajic-Trosic, J., Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram, CALPHAD, vol. 33, br. 1, 2009, p. 221-226.
8. [8] Dinsdale, A.T., Watson, A., Kroupa, A., Vrestal, J., Zemanova, A., Vizdal, J. (Eds.), COSTAction 531-Atlas of Phase Diagrams for Lead-free Solders, vol. 1, Brno, Czech Republic, 2008.

9. [9] Itabashi, S., Kameda, K., Yamaguchi, K., Toshiko, K., Activity of Indium in In-Bi-Cu and In-Sb-Cu Alloys Measured by an EMF Method Using a Zirconia Electrolyte, J. Japan Inst. Met., vol. 63, no. 7, 1999, p. 817–821.