For the complete definition of the properties
of the ternary Bi–Cu–In system,there were performed the investigation of micro
structures, hardness by Brinel alloys. In the range of this ternary system,
numerous alloys were tested for three vertical sections, with molar ratio Sb:
Cu= 1, Cu:In= 1, Sb:In=.1. By application of CALPHAD method, and software
package PANDAT 8.1, there were calculated the isothermal cross section at 250C
and 4000C.
Bi–Cu–In ternary system microstructure hardness isothermal sections
For the complete definition of the properties
of the ternary Bi–Cu–In system,there were performed the investigation of micro
structures, hardness by Brinel alloys. In the range of this ternary system,
numerous alloys were tested for three vertical sections, with molar ratio Sb:
Cu= 1, Cu:In= 1, Sb:In=.1. By application of CALPHAD method, and software
package PANDAT 8.1, there were calculated the isothermal cross section at 250C
and 4000C.
Bi–Cu–In ternary system microstructure hardness isothermal sections
Birincil Dil | İngilizce |
---|---|
Bölüm | Araştırma Makalesi |
Yazarlar | |
Yayımlanma Tarihi | 1 Eylül 2017 |
Yayımlandığı Sayı | Yıl 2017 Cilt: 6 Sayı: 2 |