Beyazlatma ajanlarının farklı rezin matriksli seramiklerin mikro sertliğine etkisi

Öz

ÖZET Amaç: Bu çalışmanın amacı, farklı beyazlatma protokollerinin ve konsantrasyonlarının in vitro CAD/CAM materyallerinin mikro sertliği üzerindeki etkisini değerlendirmektir. Yöntemler: Beş adet CAD/CAM bloğu; rezin nanoseramik, esnek nano-hibrit seramik, hibrit seramik, rezin infiltre seramik, güçlendirilmiş kompozit kullanıldı. Her blok ve beyazlatma prosedürü için 1,5 mm kalınlığında yüz örnek hazırlandı (n=10). Bitirme ve cilalama, üreticinin önerileri doğrultusunda uygulandı. Evde beyazlatma grubuna 14 gün boyunca günde 6 saat olmak üzere %16 karbamid peroksit içerikli Opalescence PF beyazlatma jeli uygulanırken, ofiste beyazlatma grubuna 1. ve 7. günlerde seans başına 2 kez 20 dakika boyunca %40 hidrojen peroksit içerikli Opalescence Boost beyazlatma jeli uygulandı. Örneklerin mikro sertliği, işlemden önce ve sonra bir Vickers sertlik cihazı ile ölçüldü. Veriler tekrarlanan ölçümler varyans analizi ve Bonferroni düzeltmesi ile istatistiksel olarak değerlendirildi. Sonuçlar: Beyazlatmadan sonra en yüksek mikro sertlik değerleri rezin infiltre seramikteydi (p<0,05). Hibrit seramiğin mikro sertlik değerleri önemli ölçüde azaldı (p<0,05). Hibrit seramik dışındaki bloklarda ofis içi ve evde yapılan beyazlatma işlemleri arasında önemli bir fark tespit edilmedi. Sonuçlar: Hem ofis içi hem de evde yapılan beyazlatma protokolleri rezin infiltre seramik restorasyonların mikro sertliğini azaltmayacaktır, bu nedenle bu tip CAD/CAM blokları beyazlatma tedavilerinde tercih edilebilir.

Anahtar Kelimeler

• hibrit bloklar
• beyazlatma
• mikro sertlik

Effect of bleaching agents on microhardness of different resin matrix ceramics

Öz

Aim: The objective of this study is to assess the effect of different bleaching protocols and concentrations on the microhardness of CAD/CAM materials in vitro. Material and Methods: Five contemporary CAD/CAM blocks; resin nanoceramic, flexible nano-hybrid ceramic, hybrid ceramic, resin-infiltrated ceramic, reinforced composite were used. One hundred samples were prepared for every block and bleaching procedure (n=10) with a thickness of 1.5 mm. Finishing and polishing were applied in accordance with the manufacturers' recommendations. Opalescence PF bleaching gel with a 16% carbamide peroxide content was applied to the at-home bleaching group for 14 days for 6 hours a day, whereas Opalescence Boost bleaching gel with a hydrogen peroxide content of 40% was applied to the in-office bleaching group for 20 minutes 2 times per session on days 1 and 7. The microhardness of the samples was measured with a Vickers hardness device before and after processing. The data were statistically evaluated with the repeated-measures analysis of variance and the Bonferroni correction. Results: After bleaching, the highest microhardness values were in the resin-infiltrated ceramic (p<0.05). The microhardness values of hybrid ceramic decreased significantly (p<0.05). No significant difference was detected between in-office and at-home bleaching processes in blocks other than the hybrid ceramic. Conclusions: Bleaching protocols, both in-office and at-home, will not decrease the microhardness of resin-infiltrated ceramic restorations and they may better preserve aesthetic during bleaching, so this type of CAD/CAM blocks may be preferred in cases of bleaching treatments.

Anahtar Kelimeler

• hybrid blocks
• bleaching
• microhardness

Kaynakça

1. Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont. 2015;28:227-235.
2. Albero A, Pascual A, Camps I, Grau-Benitez M. Comparative characterization of a novel cad-cam polymer-infiltratedceramic-network. J Clin Exp Dent. 2015;7:e495-e500.
3. Awada A, Nathanson D. Mechanical properties of resin ceramic CAD/CAM restorative materials. J Prosthet Dent. 2015;114:587-593.
4. Kihn, PW. Vital tooth whitening. Den Clin North Am. 2007; 51(2):319-331.
5. Cavalli V, Arrais CAG, Giannini M, Ambrosano GMB. High concentrated carbamide peroxide bleaching agents effects on enamel surface. J Oral Rehabil. 2004;31(2):155-159.
6. Karakaya İ, Cengiz E. Effect of 2 bleaching agents with a content of high concentrated hydrogen peroxide on stained 2 CAD/CAM blocks and a nanohybrid composite resin: An AFM evaluation. BioMed Res Int. 2017;2017:6347145.
7. Alharbi A, Ardu S, Bortolotto T, Krejci I. In‐office bleaching efficacy on stain removal from CAD/CAM and direct resin composite materials. J Esthet Restor Dent. 2018;30(1):51-58.
8. Juntavee N, Juntavee A, Saensutthawijit P. Influences of light-emitting diode illumination bleaching technique on nanohardness of computer-aided design and computer-aided manufacturing ceramic restorative materials. J Contemp Dent Pract. 2018;19(2):196-204.

9. Öztürk C, Çelik E, Özden AN. Influence of bleaching agents on the color change and translucency of resin matrix ceramics. J Esthet Restor Dent. 2020;32(5):530-535.
10. Moraes RR, Marimon JLM, Schneider LFJ, Sobrinho LC, Camacho GB, Bueno M. Carbamide peroxide bleaching agents: effects on surface roughness of enamel, composite and porcelain. Clin Oral Invest. 2006;10(1):23-28.
11. Ourique SAM, Arrais CAG, Cassoni A, Ota-Tsuzuki C, Rodrigues JA. Effects of different concentrations of carbamide peroxide and bleaching periods on the roughness of dental ceramics. Braz Oral Res. 2011;25(5):453-458.
12. Polydorou O, Mönting JS, Hellwig E, Auschill TM. Effect of in-office tooth bleaching on the microhardness of six dental esthetic restorative materials. Dent Mat. 2007;23(2):153-158.
13. Turker ŞB, Biskin T. Effect of three bleaching agents on the surface properties of three different esthetic restorative materials. J Prosth Dent. 2003;89(5):466-473.
14. Li Q, Yu H, Wang Y. Colour and surface analysis of carbamide peroxide bleaching effects on the dental restorative materials in situ. J Dent. 2009;37(5):348-356.
15. Okte Z, Villalta P, Garc´ıa-Godoy F, Lu H, Powers M. Surface hardness of resin composites after staining and bleaching. Oper Dent. 2006;31(5);623-628.
16. Bailey SJ, Swift Jr EJ. Effects of home bleaching products on composite resins. Quint Int. 1992;23(7):489-494.
17. Cooley R, Burger MK. Effect of carbamide peroxide on composite resins. Quint Int. 1991;22(10);817-821.
18. Gurgan S,Yalcin F. The effect of 2 different bleaching regimens on the surface roughness and hardness of toothcolored restorative materials. Quint Int. 2007;38(2):83-87.
19. Yap AUJ, Wattanapayunkul P. Effects of in-office tooth whiteners on hardness of tooth-colored restoratives. Oper Dent. 2002;27(2):137-141.
20. Mujdeci A, Gokay O. Effect of bleaching agents on the microhardness of tooth-colored restorative materials. J Dent. 2006;95(4):286-289.
21. Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent. 2016;115(1):71-75.
22. Elsaka SE. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: the effect of surface treatments. J Adhes Dent. 2014;16(6):531-540.
23. Yikilgan İ, Kamak H, Akgul S, Ozcan S, Bala O. Effects of three different bleaching agents on microhardness and roughness of composite sample surfaces finished with different polishing techniques. J Clin Exp Dent. 2017;9(3):e460-e465.
24. Colombo M, Poggio C, Lasagna A, Chiesa M, Scribante A. Vickers micro-hardness of new restorative CAD/CAM dental materials: evaluation and comparison after exposure to acidic drink. Materials. 2019;12(8):1246-1257.
25. Lawson NC, Bansal R, Burgess JO. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dental Materials. 2016;32(11), e275–e283.
26. Yin R, Jang YS, Lee MH, Bae TS. Comparative Evaluation of Mechanical Properties and Wear Ability of Five CAD/CAM Dental Blocks. Materials (Basel). 2019;12(14):2252.
27. Spitznagel FA, Vuck A, Gierthumuehlen PC, Blatz MB, Horvath SD. Adhesive bonding to hybrid materials: An overview of materials and recommendations. Compend Contin Educ Dent. 2016;37(9):630-637.
28. Spitznagel FA, Horvath SD, Guess PC, Blatz MB. Resin bond to indirect composite and new ceramic/polymer materials: A review of the literature. J Esthet Restor Dent. 2014;26(6);382-393.
29. Stawarczyk B, Awad D, Ilie N. Blue-light transmittance of esthetic monolithic cad/cam materials with respect to their composition, thickness, and curing conditions. Oper Dent. 2016;41(5):531-540.
30. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mat. 2014; 30(5):564-569.
31. Shembish FA, Tong H, Kaizer M, Janal MN, Thompson VP, Opdam NJ, Zhang Y. Fatigue resistance of CAD/CAM resin composite molar crowns. Dent Mat. 2016,32(4):499-509.
32. Alharbi A, Ardu S, Bortolotto T, Krejci I. Stain susceptibility of composite and ceramic CAD/CAM blocks versus direct resin composites with different resinous matrices. Odontology. 2017;105(2):162-169.
33. Briso ALF, Tuñas ITC, de Almeida LCAG, Rahal V, Ambrosano G. Effects of five carbamide peroxide bleaching gels on composite resin microhardness. Acta Odontol Latinoam. 2010;23(1):27-31.
34. Hussein G, Wagdy N, Nasser M. Effect of different beaching protocols on biaxial flexural strength and micro hardness of two ceramic materials. Egypt Dent J. 2020;66(4):2563-2573.
35. Rangel J, Zanatta R, Albuquerque A. The effect of bleaching gel application on the physical properties of different CAD/CAM restorative materials. J Dent Health Oral Disord Ther. 2021:12(2):41-44.
36. Serin-Kalay T, Zaim B. How a 16% Carbamide peroxide home bleaching agent affects the surface properties of chairside CAD/CAM materials? Odovtos Int J Dent Sci. 2022;24(2):57-68.
37. Berga-Caballero A, Forner-Navarro L, Amengual-Lorenzo J. At-home vital bleaching: a comparison of hydrogen peroxide and carbamide peroxide treatments. Med Oral Patol Oral Cir Bucal. 2006;11(1):E94-9.
38. Greenwall L. Bleaching techniques in restorative dentistry: An illustrated guide. 2001. CRC Press.
39. Joiner, A. The bleaching of teeth: a review of the literature. Journal of Dentistry. 2006; 34(7), 412–419.
40. Karakaya I,, Cengiz‐Yanardag E. Changes in optical characteristics and surface topography of CAD/CAM materials after bleaching applications: an AFM evaluation. J Prosthodont. 2020;29(3):226-236.
41. Butler CJ, Masri R, Driscoll CF, Thompson GA, Runyan DA, von Fraunhofer JA. Effect of fluoride and 10% carbamide peroxide on the surface roughness of low-fusing and ultra low–fusing porcelain. J Prosthet Dent. 2004;92(2):179-183.
42. Basting RT, Y Fernandez CF, Ambrosano GMB, de Campos IT. Effects of a 10% carbamide peroxide bleaching agent on roughness and microhardness of packable composite resins. J Esthet Restor Dent. 2005;17(4):256-262.
43. Craig, RG, Powers JM. Restorative Dental Materials. 2002;11th Ed., St. Louis, Missouri: Mosby, Inc., p.: 672-675.
44. Silva Costa SX, Becker AB, de Souza Rastelli AN, Monteiro Loffredo LDC, de Andrade MF, Bagnato VS. Effect of four bleaching regimens on color changes and microhardness of dental nanofilled composite. Int J Dent. 2009;2009:313845.
45. Demir N, Karci M, Ozcan M. Effects of 16% carbamide peroxide bleaching on the surface properties of glazed glassy matrix ceramics. BioMed Res Int. 2020:1864298.
46. Tavangar MS, Mousavipour E, Ansarifard E. The effect of bleaching on the optical and physical properties of externally stained monolithic zirconia. Clin Exp Dent Res. 2021;7(5):861-867.
47. Esmaeili B, Abolghasemzadeh F, Gholampor A, Daryakenari G. The effect of home bleaching carbamide peroxide concentration on the microhardness of dental composite resins. Gen Dent. 2018;66(1):40-44.
48. Facenda JC, Borba M, Corazza PH. A literature review on the new polymer-infiltrated ceramic-network material (PICN). J Esthet Restor Dent. 2018;30(4):281-286.
49. Gul P, Karatas O, Alp HH, Cam IB, Ozakar-Ilday N. Monomer release from nanohybrid composites after bleaching. J Oral Sci. 2019;61(2):351-357.
50. Lima DANL, Alexandre RS, Martins ACM, Aguiar FHB, Ambrosano GMB, Lovadino JR. Effect of curing lights and bleaching agents on physical properties of a hybrid composite resin. J Esthet Restor Dent. 2008;20(4):266-273.
51. Swift Jr EJ, Perdig˜ao J. Effects of bleaching on teeth and restorations. Compend Contin Educ Dent. 1998;19(8):815-820.
52. Garcı´a-Godoy F, Garcı´a-Godoy A, Garcı´a-Godoy F. Effect of bleaching gels on the surface roughness, hardness, and micromorphology of composites. Gen Dent. 2002;50:247-50.
53. Sasahara RMC, Ribeiro F da C, Cesar PF, Yoshimura HN. Influence of the finishing technique on surface roughness of dental porcelains with different microstructures. Oper Dent. 2006;31(5):577-583.
54. Cengiz E, Kurtulmus‐Yilmaz S, Ulusoy N, Deniz ST, Yuksel‐Devrim E. The effect of home bleaching agents on the surface roughness of five different composite resins: A SEM evaluation. Scanning. 2016;38(3):277-283.
55. Rattacaso RMB, Garcia L de FR, Aguilar FG, Consani S, Pires-de F de CP. Bleaching agent action on color stability, surface roughness and microhardness of composites submitted to accelerated artificial aging. Eur J Dent. 2011;5(2):143-149.
56. Wang L, Francisconi LF, Atta MT, Dos Santos JR, Del Padre NC, Gonini A. Effect of bleaching gels on surface roughness of nanofilled composite resins. Eur J Dent. 2011;5(2):173-179.
57. AlQahtani MQ. The effect of a 10% carbamide peroxide bleaching agent on the microhardness of four types of direct resin-based restorative materials. Oper Dent. 2013;38(3):316-323.