Derleme
BibTex RIS Kaynak Göster

DİKDÖRTGEN KESİTLİ KANATÇIKLARIN ISI TRANSFERİNE OLAN ETKİSİ: DERLEME MAKALESİ

Yıl 2018, Cilt: 4 Sayı: 2, 162 - 174, 19.12.2018
https://doi.org/10.22531/muglajsci.445045

Öz

Bir çok mühendislik probleminde ısı transferi oranları önemli bir etkiye sahiptir. Otomotiv, havalandırma, elektronik soğutma, hava aracı gibi bir çok endüstriyel uygulama alanında ısı artımı, ekipmanlarda fazla ısınmaya neden olarak sistem hatalarına, kısa makine ömrüne, güvenilirliğin düşmesine ve bakım ihtiyacının artmasına neden olmaktadır. Bu tip problemlerin önüne geçilmesinde pasif soğutma teknikleri sıklıkla kullanılmaktadır. Bu derleme makalesinde yüksek verim ve düşük maliyet ile ısı transferi iyileştirmesi sağlayan pasif soğutma tekniklerinden olan dikdörtgen kanatçıklar araştırılmıştır.Ayrıca dikdörtgen kanatçıkların eğimli, delikli, aralıklı, hizalı ve kaydırılmış olarak kullanılmasının ısı transferine olan etkilerinin araştırıldığı bir çok makale de özetlenmiştir. Kanatçıklı yapılar ile ısı transferini arttırmak için tasarımcılar, kanatçık uzunluğu, kanatçık şekli, kanatçık genişliği, kanatçık sayısı, kanatçıklar arası mesafeler gibi bir çok parametreyi optimize etmek mecburiyetindedir. Bu optimizasyon sürecinde deneyim sahibi olmayan bir tasarımcı, ısı transferini arttırmak yerine, tasarladığı kanatçıklı yapı ile gelen havanın ısınan hava ile karışmasını engelleyip ısı transferi üzerinde tam tersi etki yaratabilmektedir. Bu derleme makalesi ıs transferiini dikdörtgen kanatçık kullanarak maksimize etmek isteyen tasarımcılar için bir rehber niteliğindedir ve literatürde bu konu ile yapılmış geniş bir spektrumu taramaktadır.

Kaynakça

  • [1] Liu, S., Sakr, M., A Comprehensive Review on Passive Heat Transfer Enhancements in Pipe Exchangers, Renewable and Sustainable Energy Reviews, vol. 19, pp: 64-81, 2013.
  • [2] Nagarani, N., Mayilsamy, K., Murugesan, A., Kumar, S.G., Review of Utilization of Extended Surfaces in Heat Transfer Problems, Renewable and Sustainable Energy Reviews, vol. 29, pp: 604-613, 2014.
  • [3] Kraus, A., Azız, Ab., Welty, J., Extended Surface Heat Transfer, John Wıley &Sons, INC., 2001, USA. [4] Jeng, T,M, Tzeng, S,C., Pressure Drop and Heat Transfer of Square Pin-Fin Arrays in in-Line and Staggered Arrangements,, International Journal of Heat and Mass Transfer, vol. 50, pp: 2364-2375, 2007.
  • [5] Wang, F., Zhang, J., Wang, S., Investigation on Flow and Heat Transfer Characteristics in Rectangular Channel with Drop-Shaped Pin Fins, Propulsion and Power Research, vol. 1, pp: 64-70, 2012.
  • [6]Cho, Y.I.,Ganic, E.N:, Hartnett, J.P., Rohsenow, W.M., Basic Concepts of Heat Transfer, McGraw Hıll, 3rd Edition,1998, USA.
  • [7] Incropera, F., Dewitt, D.P., Introduction to Heat Transfer, 6th Edition, John Wıley &Sons, INC., 2002, USA.
  • [8] Gomes D. K., Experimental Investigation Of Air Cooling Systems For Electronic Equipment By Using Vortex Promoters, M.Sc. Thesis, Rutgers University, New Jersey, 2007.
  • [9] Sahin,B., Demir,A., Performance Analysis of a Heat Exchanger Having Perforated Square Fins, Applied Thermal Engineering, vol. 28, pp: 621-632, 2008.
  • [10] Şara, O.N., Performance Analysis of Rectangular Ducts with Staggered Square Pin Fins, Energy Conversion and Management, vol. 44, pp: 1787-1803, 2003.
  • [11] Mostafavi, G., Natural Convection Heat Transfer from Interrupted Rectangular Fins, MSc Thesis, Sımon Fraser University, 2012.
  • [12] Munson, B.R., Young, D.F., Okiishi, T.H., Fundamentals of Fluid Mechanics,5th Edition, John Wiley&Sons, 2006.
  • [13] Elenbaas, W., Heat Dissipation of Parallel Plates by Free Convection, Physica Vol 9, pp: 1-28, 1942.
  • [14] Starner, K.E., McManus JR,, H.N., An Experimental Investigation of Free Convection Heat Transfer From Rectangular Fin Arrays, Journal of Heat Transfer, Series C, Vol. 85, pp: 273-278, 1963.
  • [15] Welling, J.R., Wooldridge, G.B., Free Convection Heat Transfer Coefficients From Rectangular Vertical Fins, Journal of Heat Transfer, Series C, Vol. 87, pp: 439-444, 1965.
  • [16] Harahap, F., McManus JR, H.N., Natural Convection Heat Transfer From Horizontal Rectangular Fin Arrays, Transactions of ASME, vol. 89, pp: 32-38, 1967.
  • [17] Jones, C.D., Smith, L.F., Optimum Arrangement of Rectangular Fins on Horizontal Surfaces for Free Convection Heat Transfer, Transactions of ASME, vol. 92, pp:6-10, 1970.
  • [18]Leung, C.W., Probert, S.D., Shilston, M.J., Heat Exchanger Design: Optimal Uniform Separation between Rectangular Fins Protruding from a Vertical Rectangular Base, Applied Energy, vol. 19, pp: 287-299, 1985.
  • [19] Leung, C.W., Probert, S.D., Shilston, M.J., Heat Transfer Performances of Vertical Rectangular Fins Protruding from Rectangular Bases: Effect of Fin Length, Applied Energy, vol. 22, pp: 313-318, 1986.
  • [20] Leung, C.W., Probert, S.D., Heat Exchanger Design: Optimal Uniform Thickness of Vertical Rectangular Fins Protruding Perpendicularly Outwards, at Uniform Separations, From a Vertical Rectangular Base, Applied Energy, Vol. 26, pp: 111-118, 1987.
  • [21] Leung, C.W., Probert, S.D., Heat Exchanger Design: Optimal Thickness (under Natural Convection Conditions) of Vertical Rectangular Fins Protruding Upwards from a Horizontal Rectangular Base, Applied Energy, vol. 29, pp: 299-306, 1988.
  • [22] Bar-Cohen, A., Optimum natural convection cooling of electronic assemblies, American Society of Mechanical Engineers, Design Engineering Conference and Show, Chicago, Ill., May 9-12, 1977.
  • [23] Bar-Cohen, Fin thickness for an optimized natural convection array of rectangular fibs, ASME Journal of Heat Transfer, vol. 101, pp: 564-566, 1979.
  • [24]Leung, C.W., Probert, S.D., Natural convective heat exchanger with vertical rectangular fins and base: design criteria, Proc.I.Mech.E., vol 201, pp: 365-372, 1987.
  • [25] Leung, C.W., Probert, S.D., Steady State Heat Transfers from Vertical Fins protruding Upwards From Horizontal Bases, J.Inst. Energy, 1989.
  • [26] Leung, C.W., Probert, S.D., Heat-exchanger Performance: Effect of Orientation, Applied Energy, vol 33, pp: 235-252, 1989.
  • [27] Ko, Y.M., Leung, C.W., Probert, S.D., Steady-State Free Convective Cooling of Heat Exchangers with Vertical Rectangular Fins: Effect of Fin Material, Applied Energy, vol 34, pp: 181-191, 1989.
  • [28] Babus’Hag, R.F., Probert, S.F., Taylor, C.R., Heat Transfer Effectivenesses of Shrouded, Rectangular Fin Arrays, Applied Energy, vol. 46, pp: 99-112, 1993.
  • [29] Harahap, F., Setio, D., Correlations for Heat Dissipation and Natural Convection Heat-Transfer from Horizontally-Based, Vertically-Finned Arrays, Applied Energy, vol. 69, pp: 29-38, 2001.
  • [30] Yazicioglu, B., Yüncü, H., Optimum Fin Spacing of Rectangular Fins on a Vertical Base in Free Convection Heat Transfer, Heat and Mass Transfer, vol 44, pp: 11-21, 2007.
  • [31] Yüncü, H,, Güvenc, A., An experimental investigation on performance of rectangular fins on a vertical base in free convection heat transfer, Heat and Mass Transfer, vol. 37, pp: 409-416, 2001.
  • [32] Dogan, M., Sivrioglu, M., Experimental Investigation of Mixed Convection Heat Transfer From Longitudinal Fins in a Horizontal Rectangular Channel: In Natural Convection Dominated Flow Regimes, Energy Conversion and Management, vol. 50, pp: 2513-2521, 2009.
  • [33] Dogan, M., Sivrioglu, M., Experimental Investigation of Mixed Convection Heat Transfer From Longitudinal Fins in a Horizontal Rectangular Channel, International Journal of Heat and Mass Transfer, vol. 53, pp: 2149-2158, 2010.
  • [34] Hong, S-H., Chung, B-J., Variations of the Optimal Fin Spacing According to Prandtl number in Natural Convection, International Journal of Thermal Sciences, vol. 101, pp: 1-8, 2016.
  • [35] Ayli, E., Bayer, O., Aradag, S., Experimental Investigation and CFD Analysis of Rectangular Profile FINS in a Square Channel for Forced Convection Regimes, International Journal of Thermal Sciences, vol. 109, pp: 279-290, 2016.
  • [36] Sane, N.K., Sukhatme, S.P., Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays, in Proc. Of 5th International Heat Transfer Conference, Vol. 3, pp: 114-118, 1974, Tokyo, Japan.
  • [37] Vollaro, A.L., Grignaffini, S., Gugliermetti, F., Optimum Design of Vertical Rectangular Fin Arrays, International Journal of Thermal Science, vol. 38, pp: 525-529, 1999.
  • [38] Arquis, E., Rady, M., Study of Natural Convection Heat Transfer in a Finned Horizontal Fluid Layer, International Journal of Thermal Sciences, vol. 44, pp: 43-52, 2005.
  • [39] Baskaya, S., Sivrioglu, M., Ozek, M., Parametric Study of Natural Convection Heat Transfer from Horizantal Rectangular Fin Arrays, International Journal of Thermal Science, vol: 39, pp: 797-805, 2000.
  • [40] Pathak, M.K., Mer, K.K.S., Pant, P.P., Numerical Analysis of Natural Convection in Rectangular Enclosure with Heated Finned Base Plate, International Journal of Research in Mechanical Engineering & Technology , vol: 3, pp:64-67,2013. [41] Culham, J. , Yovanovich, M. M., Lee,S., Thermal Modeling of Isothermal Cuboids and Rectangular Heat Sinks Cooled by Natural Convection, IEEE Transaction on Components, Packaging and Manufacturing Technology, vol. 18, pp. 559-566, 1995.
  • [42] Yuncu, H., Anbar, G., An Experimental Investigation on Performance of Fins on a Horizontal Base in Free Convection Heat Transfer,” Journal Of Heat and Mass Transfer, vol. 33, no. 5-6, pp. 507-514, 1998.
  • [43] Bar-Cohen, A., Rohensow, W., Thermally Optimum Spacing of Vertical, Natural Convection Cooled Parallel Plates, Journal of heat Transfer, vol. 106, no 1, pp. 11-124, 1984.
  • [44] Miyatake, O Fujii, T., Free Convection Heat Transfer Between Vertical Parallel Plates -One Plate Isothermally Heated and The Other Thermally Insulated, Heat Transfer Japan, vol. 1, pp. 30-38, 1972.
  • [45] Olusoji,O., Hetherington,H., Application of The Finite Element Method to Natural Convection Heat Transfer From The Open Vertical Channel, International Journal of Heat and Mass Transfer, vol. 20, no. 11, pp. 1195-1204, 1977.
  • [46] Fujii, M., “Enhancement of Natural Convection Heat Transfer From A Vertical Heated Plate Using Inclined Fins,” Heat Transfer—Asian Research, vol. 36, no. 6, pp. 334-344, 2007.
  • [47] Kapade, T.T., Palande, D.D. Review of Natural Convective Heat Transfer from Interrupted Rectangular Fin Array, International Research Journal of Engineering and Technology, Vol. 2, pp: 823-829, 2015.
  • [48] Ahmadi, M., Mostofavi, G., Bahrami, M., Natural Convection from Rectangular Interrupted Fins, International Journal of Thermal Sciences, vol. 82, pp: 62-71, 2014.
  • [49] Kharce, S.S., Farkade, H.S., Heat Transfer Analysis through Fin Array by Using Natural Convection, International Journal of Emerging Technology and Advanced Engineering, vol 2., pp: 595-598, 2012.
  • [50] Wange, S.M., Metkar, R.M., Computational Analysis of Inverted Notched Fin Arrays Dissipating Heat by Natural Convection, International Journal of Engineering and Innovative Technology, vol 2. pp: 245-249, 2013.
  • [51] Dixit, S.R., Mishra, D.P., Heat Transfer Analysis through Horizontal Rectangular Inverted Notched Fin Array Using Natural Convection by Experimental Method, International Journal of Scientific & Engineering Research, vol. 4, 2013.
  • [52] Shebab, S.N., Experimental Study of Free- Convection from Rectangular Fins Array on a Heated Horizontal Plate with Notch Effect, Al-Nahrain Journal for Engineering Sciences, Vol (20), pp: 140-148, 2017.
  • [53] Bakale, R., Baheti, K., Dokade, C., Galande, P., Experimental Analysis of Natural Convection Heat Transfer from Notched Fin, Imperial Journal of Interdisciplinary Research, Vol 2, pp: 1211-1214, 2016.
  • [54] Singh, B., Singh, S., A Research Paper on Heat Transfer in Notch Fin and Un-notch Fin, International Journal for Research in Applied Science & Engineering Technology, Vol 4, pp:12-19, 2016.
  • [55] Kallanavar, S., Kapale, U.C., Computational Analysis of Notched Fin Array Using Natural Convection, International Research Journal of Engineering Technology, Vol. 3, pp: 741-746, 2016.
  • [56] Taji, S.G., Parishward, G.V., Sane, N.K., Experimental Investigation of Heat Transfer and Flow Pattern From Heated Horizontal Rectangular Fin Array Under Natural Convection, International Journal of Heat and Mass Transfer, Vol. 50, pp: 1005-1015, 2014.
  • [57] Beldar, K., Analysis of Natural Convective Heat Transfer From Cylinder Having Rectangular Notched Fins, International Journal of Engineering Research & Technology, Vol. 6, pp: 834-838, 2017.
  • [58] Essa, A.A., Widyan, M.A., Enhancement of Natural Convection Heat Transfer from a Fin by Triangular Perforations of Bases Parallel and Towards its Tip, Applied Mathematics & Mechanics, vol 28, pp:1033-1044,2014
  • [59] Essa, A.A., Al-Odat, M.Q., Enhancement of Natural Convection Heat Transfer from Perforated Plates, The Arabian Journal for Science and Engineering, vol. 34, 2014.
  • [60] Zan,W., Lı, W., Sun, Z-J., Hong, R-H., Modelling Natural Convection Heat Transfer From Perforated Plates, Journal of Zhejiang University- SCIENCE A (Applied Physics and Engineering), vol. 12, pp: 353-360, 2012.
  • [61] Meng, X.R., Ma, X.L., Lu, J.F., Wei, X.L., A Study on Improving in Natural Convection Heat Transfer for Heat Sink of High Power LEDs, Manufacturing Science and Technology, ICMST2011, pp: 6834-6839, 2011.
  • [62] Sara, O.N. , Pekdemir, T., Yapici, S., Yılmaz, M., Heat-transfer enhancement in a channel flow with perforated rectangular blocks, International Journal of Heat and Fluid Flow, vol. 22 , pp: 509–518, 2001.
  • [63] Ehteshum, M., Ali, M., Islam, Q., Tabassum, M., Thermal and Hydraulic Performance Analysis of Rectangular Fin Arrays with Perforation Size and Number, Procedia Engineering, vol. 105, pp: 184-191, 2015.
  • [64] Awasarmol, U. V., Pise, A.T., An Experimental Investigation of Natural Convection Heat Transfer Enhancement from Perforated Rectangular Fin Arrays at Different Inclinations, Experimental Thermal and Fluid Science, vol. 68, pp: 145-154, 2015.
  • [65] Sahin, B., Demir, A., Performance Analysis of a Heat Exchanger having Perforated Square Fins, Applied Thermal Engineering, vol. 28, pp: 621-632, 2008.
  • [66] Ehteshum, M., Ali, M., Islam, Q., Tabassum, M., Thermal and Hydraulic Performance Analysis of Rectangular Fin Arrays with Perforation Size and Number, Procedia Engineering, vol. 105, pp: 184-191, 2015.
  • [67] Muthuraja, C.S., Aravindkumar, Hanoca, P., Experimental Study of the Perforated Rectangular Fins by Natural Convection, International Journal of Advanced Technology in Engineering and Science, vol. 3, pp: 303-307, 2015.
  • [68] Patil, M. H., Patil, S.V., Deore, E.R., Chaudhari, G.A., Design & Analysis of Perforated Rectangular Fin Array with Varying Percentage of Perforation, International Advanced Research Journal in Science, Engineering and Technology, Vol. 3, pp: 26-31, 2016.
  • [69] Ibrahim, T.K., Basrawi, F., Mohammed, M.N., Ibrahim, H., Effect of Perforation Area on Temperature Distribution of the Rectangular Fins Under Natural Convection, ARPN Journal of Engineering and Applied Sciences, Vol. 11, pp:6371-6375, 2016.
  • [70] Dhanawade, K.H., Sunnapwar, V.K., Dhanawade, S.H., Thermal Analysis of Square and Circular Perforated Fin Arrays by Forced Convection, International Journal of Current Engineering and Technology, vol 2, pp: 109-114, 2014.
  • [71] Prasad, L., Tewari, S., Kumar, A., An Experimental Study of Heat Transfer Enhancement in the Perforated Rectangular Fin, Journal of Integrated Science & Technology
  • [72] Huang, G.J., Wong, S.C., Lin, C.P., Enhancement of Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays with Perforations in Fin Base, International Journal of Thermal Sciences, vol. 84, pp: 164-174, 2014.
  • [73] Bassam, A.K., Abu, H., Natural Convection Heat Transfer from a Cylinder with High Conductivity Permeable Fins, ASME Journal of Heat Transfer, vol. 125, pp: 282-288, 2003.
  • [74] Bassam, A.K., Abu, H., Enhanced Forced Convection Heat Transfer from a Cylinder Using Permeable Fins, ASME Journal of Heat Transfer, vol. 125, pp: 804-811, 2003.
  • [75] Ismail, F., Reza, M.O., Zobaer, M.A., Ali, M., Numerical Investigation of Turbulent Heat Convection from Solid Longitudinally Perforated Rectangular fins, Procedia Engineering, vol. 56, pp: 497-502, 2013.
  • [76] Jonsson, H., Moshfegh, B., Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks—Influence of Flow By Pass, IEEE Transactions on Components and Packaging Technologies, vol: 24, pp:142–149, 2001.
  • [77] Shaeri, M.R., Yaghoubi, M., Thermal Enhancement from Heat Sinks By Using Perforated Fins, Energy Conversion and Management, vol. 50, pp: 1264-1270, 2009.[78] Rouvreau S, David L, Calluaud D, Joulain P. Laminar junction flow at low Reynolds number: influence of the upstream region on the comparison between experiments and calculations. , Comptes Rendus Mécanique ,vol 333, pp: 265–272, 2005.
  • [79] Shaeri, MR., Jen, T.C., The Effects of Perforation Sizes on Laminar Heat Transfer Characteristics of an Array of Perforated Fins, Energy Conversion and Management, Vol. 64, pp: 328-334, 2012.
  • [80] Ismail, F., Hasan, M.N., Saha, S.C., Numerical Study of Turbulent Fluid Flow and Heat Transfer in Lateral Perforated Extended Surfaces, Energy, vol. 64, pp: 632-639, 2014.
  • [81] Shaeri, M.R., Yaghoubi, M., Jafarpur, K., Heat Transfer Analysis of Lateral Perforated Fin Heat Sinks, Applied Energy, Vol. 86, pp: 2019-2029, 2009.
  • [82] Vyas, A., Gupta, S., Gupta, S., Determining Relation among Shape of Perforation and Convective Heat Transfer from Lateral Fin Arrangement Using Simulation by Computational Fluid Dynamics, International Refereed Journal of Engineering and Science (IRJES), Vol. 5., pp: 24-31, 2016.
  • [83] Fujii, T., Imura, H., Natural-Convection Heat Transfer from a Plate with Arbitrary Inclination, International Journal of Heat and Mass Transfer, vol. 12, pp: 755-767, 1972.
  • [84] Mittelman, G., Dayan, A., Turjeman, K.D., Ullmann, A., Laminar Free Convection Underneath a Downward Facing Inclined Hot Fin Array, International Journal of Heat and Mass Transfer, vol. 50, pp: 2582-2589, 2007.
  • [85] Khudheyer, A.F., Hasan, Z.H., Effect of the Fins Configuration on Natural Convection Heat Transfer Experimentally and Numerically, International Journal of Energy and Environment, vol. 6, pp: 607-628, 2015.
  • [86] Naidu, S.V., Rao, D., Rao, B.G., Sombabu, A., Sreenivasulu, B., Natural Convection Heat Transfer from Fin Arrays- Experimental and Theoretical Study on Effect of Inclination of Base on Heat Transfer, ARPN Journal of Engineering and Applied Sciences, vol. 5, pp: 7-15, 2010.
  • [87] Rocha, A.D., Ganzarolli, M.M. Natural Convection in an Arbitrary Inclined Plate with Protruding Heated Elements, 18th International Conference of Mechanical Engineering, 2005, Brazil.
  • [88] Lee, J.B., Kim, H.J., Kim, D.K., Thermal Optimization of Horizontal Tubes with Tilted Rectangular Fins under Free Convection for the Cooling of Electronic Devices, Applied Sciences, vol: 7, 2017.
  • [89] Tari, I., Mehrtash, M., Natural Convection Heat Transfer From Inclined Plate- Fin Heat Sink, International Journal of Heat and Mass Transfer, s, vol. 56, pp: 574-593, 2013.[90] McAdams, W.H., Heat Transmission, McGraw-Hill, New York, 1954
  • [91] Churchill, S.W., Chu, H.H.S., Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate, International Journal of Heat and Mass Transfer, vol. 18, pp: 1323-1329, 1975

REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS

Yıl 2018, Cilt: 4 Sayı: 2, 162 - 174, 19.12.2018
https://doi.org/10.22531/muglajsci.445045

Öz

Heat transfer removal
rate from surfaces is great importance in many engineering applications. For
many industrial applications like automotive, air conditioning, electronic
cooling, spacecraft and aircraft applications, internal heat generation can
cause overheating problems that may result in system failure, short machine
life, need of maintenance and low system reliability. To solve such problems
passive cooling techniques are widely used. This article summarizes an
extensive literature review of rectangular fin structures that is much-used
heat transfer enhancement technique with a high efficiency rate and a low cost.
Moreover, in this study not only solid rectangular fin structures are studied
but also inclined, perforated and staggered type rectangular fin studies are
summarized. To increase the heat transfer rates and Nusselt number
distributions, designers should optimize the parameters such as fin number, fin
shape, fin height, fin diameter and inter-fin distance ratio for all of the fin
types. In the optimization process of those components, designers should have
experience with the fin design procedure; without the necessary experience and
knowledge, instead of increasing the heat transfer rates, fin surfaces can
resist and block the incoming air flow which will affect heat transfer rate
adversely. This review is a guideline for designers presenting how rectangular
fin arrays are used to enhance heat transfer rates.

Kaynakça

  • [1] Liu, S., Sakr, M., A Comprehensive Review on Passive Heat Transfer Enhancements in Pipe Exchangers, Renewable and Sustainable Energy Reviews, vol. 19, pp: 64-81, 2013.
  • [2] Nagarani, N., Mayilsamy, K., Murugesan, A., Kumar, S.G., Review of Utilization of Extended Surfaces in Heat Transfer Problems, Renewable and Sustainable Energy Reviews, vol. 29, pp: 604-613, 2014.
  • [3] Kraus, A., Azız, Ab., Welty, J., Extended Surface Heat Transfer, John Wıley &Sons, INC., 2001, USA. [4] Jeng, T,M, Tzeng, S,C., Pressure Drop and Heat Transfer of Square Pin-Fin Arrays in in-Line and Staggered Arrangements,, International Journal of Heat and Mass Transfer, vol. 50, pp: 2364-2375, 2007.
  • [5] Wang, F., Zhang, J., Wang, S., Investigation on Flow and Heat Transfer Characteristics in Rectangular Channel with Drop-Shaped Pin Fins, Propulsion and Power Research, vol. 1, pp: 64-70, 2012.
  • [6]Cho, Y.I.,Ganic, E.N:, Hartnett, J.P., Rohsenow, W.M., Basic Concepts of Heat Transfer, McGraw Hıll, 3rd Edition,1998, USA.
  • [7] Incropera, F., Dewitt, D.P., Introduction to Heat Transfer, 6th Edition, John Wıley &Sons, INC., 2002, USA.
  • [8] Gomes D. K., Experimental Investigation Of Air Cooling Systems For Electronic Equipment By Using Vortex Promoters, M.Sc. Thesis, Rutgers University, New Jersey, 2007.
  • [9] Sahin,B., Demir,A., Performance Analysis of a Heat Exchanger Having Perforated Square Fins, Applied Thermal Engineering, vol. 28, pp: 621-632, 2008.
  • [10] Şara, O.N., Performance Analysis of Rectangular Ducts with Staggered Square Pin Fins, Energy Conversion and Management, vol. 44, pp: 1787-1803, 2003.
  • [11] Mostafavi, G., Natural Convection Heat Transfer from Interrupted Rectangular Fins, MSc Thesis, Sımon Fraser University, 2012.
  • [12] Munson, B.R., Young, D.F., Okiishi, T.H., Fundamentals of Fluid Mechanics,5th Edition, John Wiley&Sons, 2006.
  • [13] Elenbaas, W., Heat Dissipation of Parallel Plates by Free Convection, Physica Vol 9, pp: 1-28, 1942.
  • [14] Starner, K.E., McManus JR,, H.N., An Experimental Investigation of Free Convection Heat Transfer From Rectangular Fin Arrays, Journal of Heat Transfer, Series C, Vol. 85, pp: 273-278, 1963.
  • [15] Welling, J.R., Wooldridge, G.B., Free Convection Heat Transfer Coefficients From Rectangular Vertical Fins, Journal of Heat Transfer, Series C, Vol. 87, pp: 439-444, 1965.
  • [16] Harahap, F., McManus JR, H.N., Natural Convection Heat Transfer From Horizontal Rectangular Fin Arrays, Transactions of ASME, vol. 89, pp: 32-38, 1967.
  • [17] Jones, C.D., Smith, L.F., Optimum Arrangement of Rectangular Fins on Horizontal Surfaces for Free Convection Heat Transfer, Transactions of ASME, vol. 92, pp:6-10, 1970.
  • [18]Leung, C.W., Probert, S.D., Shilston, M.J., Heat Exchanger Design: Optimal Uniform Separation between Rectangular Fins Protruding from a Vertical Rectangular Base, Applied Energy, vol. 19, pp: 287-299, 1985.
  • [19] Leung, C.W., Probert, S.D., Shilston, M.J., Heat Transfer Performances of Vertical Rectangular Fins Protruding from Rectangular Bases: Effect of Fin Length, Applied Energy, vol. 22, pp: 313-318, 1986.
  • [20] Leung, C.W., Probert, S.D., Heat Exchanger Design: Optimal Uniform Thickness of Vertical Rectangular Fins Protruding Perpendicularly Outwards, at Uniform Separations, From a Vertical Rectangular Base, Applied Energy, Vol. 26, pp: 111-118, 1987.
  • [21] Leung, C.W., Probert, S.D., Heat Exchanger Design: Optimal Thickness (under Natural Convection Conditions) of Vertical Rectangular Fins Protruding Upwards from a Horizontal Rectangular Base, Applied Energy, vol. 29, pp: 299-306, 1988.
  • [22] Bar-Cohen, A., Optimum natural convection cooling of electronic assemblies, American Society of Mechanical Engineers, Design Engineering Conference and Show, Chicago, Ill., May 9-12, 1977.
  • [23] Bar-Cohen, Fin thickness for an optimized natural convection array of rectangular fibs, ASME Journal of Heat Transfer, vol. 101, pp: 564-566, 1979.
  • [24]Leung, C.W., Probert, S.D., Natural convective heat exchanger with vertical rectangular fins and base: design criteria, Proc.I.Mech.E., vol 201, pp: 365-372, 1987.
  • [25] Leung, C.W., Probert, S.D., Steady State Heat Transfers from Vertical Fins protruding Upwards From Horizontal Bases, J.Inst. Energy, 1989.
  • [26] Leung, C.W., Probert, S.D., Heat-exchanger Performance: Effect of Orientation, Applied Energy, vol 33, pp: 235-252, 1989.
  • [27] Ko, Y.M., Leung, C.W., Probert, S.D., Steady-State Free Convective Cooling of Heat Exchangers with Vertical Rectangular Fins: Effect of Fin Material, Applied Energy, vol 34, pp: 181-191, 1989.
  • [28] Babus’Hag, R.F., Probert, S.F., Taylor, C.R., Heat Transfer Effectivenesses of Shrouded, Rectangular Fin Arrays, Applied Energy, vol. 46, pp: 99-112, 1993.
  • [29] Harahap, F., Setio, D., Correlations for Heat Dissipation and Natural Convection Heat-Transfer from Horizontally-Based, Vertically-Finned Arrays, Applied Energy, vol. 69, pp: 29-38, 2001.
  • [30] Yazicioglu, B., Yüncü, H., Optimum Fin Spacing of Rectangular Fins on a Vertical Base in Free Convection Heat Transfer, Heat and Mass Transfer, vol 44, pp: 11-21, 2007.
  • [31] Yüncü, H,, Güvenc, A., An experimental investigation on performance of rectangular fins on a vertical base in free convection heat transfer, Heat and Mass Transfer, vol. 37, pp: 409-416, 2001.
  • [32] Dogan, M., Sivrioglu, M., Experimental Investigation of Mixed Convection Heat Transfer From Longitudinal Fins in a Horizontal Rectangular Channel: In Natural Convection Dominated Flow Regimes, Energy Conversion and Management, vol. 50, pp: 2513-2521, 2009.
  • [33] Dogan, M., Sivrioglu, M., Experimental Investigation of Mixed Convection Heat Transfer From Longitudinal Fins in a Horizontal Rectangular Channel, International Journal of Heat and Mass Transfer, vol. 53, pp: 2149-2158, 2010.
  • [34] Hong, S-H., Chung, B-J., Variations of the Optimal Fin Spacing According to Prandtl number in Natural Convection, International Journal of Thermal Sciences, vol. 101, pp: 1-8, 2016.
  • [35] Ayli, E., Bayer, O., Aradag, S., Experimental Investigation and CFD Analysis of Rectangular Profile FINS in a Square Channel for Forced Convection Regimes, International Journal of Thermal Sciences, vol. 109, pp: 279-290, 2016.
  • [36] Sane, N.K., Sukhatme, S.P., Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays, in Proc. Of 5th International Heat Transfer Conference, Vol. 3, pp: 114-118, 1974, Tokyo, Japan.
  • [37] Vollaro, A.L., Grignaffini, S., Gugliermetti, F., Optimum Design of Vertical Rectangular Fin Arrays, International Journal of Thermal Science, vol. 38, pp: 525-529, 1999.
  • [38] Arquis, E., Rady, M., Study of Natural Convection Heat Transfer in a Finned Horizontal Fluid Layer, International Journal of Thermal Sciences, vol. 44, pp: 43-52, 2005.
  • [39] Baskaya, S., Sivrioglu, M., Ozek, M., Parametric Study of Natural Convection Heat Transfer from Horizantal Rectangular Fin Arrays, International Journal of Thermal Science, vol: 39, pp: 797-805, 2000.
  • [40] Pathak, M.K., Mer, K.K.S., Pant, P.P., Numerical Analysis of Natural Convection in Rectangular Enclosure with Heated Finned Base Plate, International Journal of Research in Mechanical Engineering & Technology , vol: 3, pp:64-67,2013. [41] Culham, J. , Yovanovich, M. M., Lee,S., Thermal Modeling of Isothermal Cuboids and Rectangular Heat Sinks Cooled by Natural Convection, IEEE Transaction on Components, Packaging and Manufacturing Technology, vol. 18, pp. 559-566, 1995.
  • [42] Yuncu, H., Anbar, G., An Experimental Investigation on Performance of Fins on a Horizontal Base in Free Convection Heat Transfer,” Journal Of Heat and Mass Transfer, vol. 33, no. 5-6, pp. 507-514, 1998.
  • [43] Bar-Cohen, A., Rohensow, W., Thermally Optimum Spacing of Vertical, Natural Convection Cooled Parallel Plates, Journal of heat Transfer, vol. 106, no 1, pp. 11-124, 1984.
  • [44] Miyatake, O Fujii, T., Free Convection Heat Transfer Between Vertical Parallel Plates -One Plate Isothermally Heated and The Other Thermally Insulated, Heat Transfer Japan, vol. 1, pp. 30-38, 1972.
  • [45] Olusoji,O., Hetherington,H., Application of The Finite Element Method to Natural Convection Heat Transfer From The Open Vertical Channel, International Journal of Heat and Mass Transfer, vol. 20, no. 11, pp. 1195-1204, 1977.
  • [46] Fujii, M., “Enhancement of Natural Convection Heat Transfer From A Vertical Heated Plate Using Inclined Fins,” Heat Transfer—Asian Research, vol. 36, no. 6, pp. 334-344, 2007.
  • [47] Kapade, T.T., Palande, D.D. Review of Natural Convective Heat Transfer from Interrupted Rectangular Fin Array, International Research Journal of Engineering and Technology, Vol. 2, pp: 823-829, 2015.
  • [48] Ahmadi, M., Mostofavi, G., Bahrami, M., Natural Convection from Rectangular Interrupted Fins, International Journal of Thermal Sciences, vol. 82, pp: 62-71, 2014.
  • [49] Kharce, S.S., Farkade, H.S., Heat Transfer Analysis through Fin Array by Using Natural Convection, International Journal of Emerging Technology and Advanced Engineering, vol 2., pp: 595-598, 2012.
  • [50] Wange, S.M., Metkar, R.M., Computational Analysis of Inverted Notched Fin Arrays Dissipating Heat by Natural Convection, International Journal of Engineering and Innovative Technology, vol 2. pp: 245-249, 2013.
  • [51] Dixit, S.R., Mishra, D.P., Heat Transfer Analysis through Horizontal Rectangular Inverted Notched Fin Array Using Natural Convection by Experimental Method, International Journal of Scientific & Engineering Research, vol. 4, 2013.
  • [52] Shebab, S.N., Experimental Study of Free- Convection from Rectangular Fins Array on a Heated Horizontal Plate with Notch Effect, Al-Nahrain Journal for Engineering Sciences, Vol (20), pp: 140-148, 2017.
  • [53] Bakale, R., Baheti, K., Dokade, C., Galande, P., Experimental Analysis of Natural Convection Heat Transfer from Notched Fin, Imperial Journal of Interdisciplinary Research, Vol 2, pp: 1211-1214, 2016.
  • [54] Singh, B., Singh, S., A Research Paper on Heat Transfer in Notch Fin and Un-notch Fin, International Journal for Research in Applied Science & Engineering Technology, Vol 4, pp:12-19, 2016.
  • [55] Kallanavar, S., Kapale, U.C., Computational Analysis of Notched Fin Array Using Natural Convection, International Research Journal of Engineering Technology, Vol. 3, pp: 741-746, 2016.
  • [56] Taji, S.G., Parishward, G.V., Sane, N.K., Experimental Investigation of Heat Transfer and Flow Pattern From Heated Horizontal Rectangular Fin Array Under Natural Convection, International Journal of Heat and Mass Transfer, Vol. 50, pp: 1005-1015, 2014.
  • [57] Beldar, K., Analysis of Natural Convective Heat Transfer From Cylinder Having Rectangular Notched Fins, International Journal of Engineering Research & Technology, Vol. 6, pp: 834-838, 2017.
  • [58] Essa, A.A., Widyan, M.A., Enhancement of Natural Convection Heat Transfer from a Fin by Triangular Perforations of Bases Parallel and Towards its Tip, Applied Mathematics & Mechanics, vol 28, pp:1033-1044,2014
  • [59] Essa, A.A., Al-Odat, M.Q., Enhancement of Natural Convection Heat Transfer from Perforated Plates, The Arabian Journal for Science and Engineering, vol. 34, 2014.
  • [60] Zan,W., Lı, W., Sun, Z-J., Hong, R-H., Modelling Natural Convection Heat Transfer From Perforated Plates, Journal of Zhejiang University- SCIENCE A (Applied Physics and Engineering), vol. 12, pp: 353-360, 2012.
  • [61] Meng, X.R., Ma, X.L., Lu, J.F., Wei, X.L., A Study on Improving in Natural Convection Heat Transfer for Heat Sink of High Power LEDs, Manufacturing Science and Technology, ICMST2011, pp: 6834-6839, 2011.
  • [62] Sara, O.N. , Pekdemir, T., Yapici, S., Yılmaz, M., Heat-transfer enhancement in a channel flow with perforated rectangular blocks, International Journal of Heat and Fluid Flow, vol. 22 , pp: 509–518, 2001.
  • [63] Ehteshum, M., Ali, M., Islam, Q., Tabassum, M., Thermal and Hydraulic Performance Analysis of Rectangular Fin Arrays with Perforation Size and Number, Procedia Engineering, vol. 105, pp: 184-191, 2015.
  • [64] Awasarmol, U. V., Pise, A.T., An Experimental Investigation of Natural Convection Heat Transfer Enhancement from Perforated Rectangular Fin Arrays at Different Inclinations, Experimental Thermal and Fluid Science, vol. 68, pp: 145-154, 2015.
  • [65] Sahin, B., Demir, A., Performance Analysis of a Heat Exchanger having Perforated Square Fins, Applied Thermal Engineering, vol. 28, pp: 621-632, 2008.
  • [66] Ehteshum, M., Ali, M., Islam, Q., Tabassum, M., Thermal and Hydraulic Performance Analysis of Rectangular Fin Arrays with Perforation Size and Number, Procedia Engineering, vol. 105, pp: 184-191, 2015.
  • [67] Muthuraja, C.S., Aravindkumar, Hanoca, P., Experimental Study of the Perforated Rectangular Fins by Natural Convection, International Journal of Advanced Technology in Engineering and Science, vol. 3, pp: 303-307, 2015.
  • [68] Patil, M. H., Patil, S.V., Deore, E.R., Chaudhari, G.A., Design & Analysis of Perforated Rectangular Fin Array with Varying Percentage of Perforation, International Advanced Research Journal in Science, Engineering and Technology, Vol. 3, pp: 26-31, 2016.
  • [69] Ibrahim, T.K., Basrawi, F., Mohammed, M.N., Ibrahim, H., Effect of Perforation Area on Temperature Distribution of the Rectangular Fins Under Natural Convection, ARPN Journal of Engineering and Applied Sciences, Vol. 11, pp:6371-6375, 2016.
  • [70] Dhanawade, K.H., Sunnapwar, V.K., Dhanawade, S.H., Thermal Analysis of Square and Circular Perforated Fin Arrays by Forced Convection, International Journal of Current Engineering and Technology, vol 2, pp: 109-114, 2014.
  • [71] Prasad, L., Tewari, S., Kumar, A., An Experimental Study of Heat Transfer Enhancement in the Perforated Rectangular Fin, Journal of Integrated Science & Technology
  • [72] Huang, G.J., Wong, S.C., Lin, C.P., Enhancement of Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays with Perforations in Fin Base, International Journal of Thermal Sciences, vol. 84, pp: 164-174, 2014.
  • [73] Bassam, A.K., Abu, H., Natural Convection Heat Transfer from a Cylinder with High Conductivity Permeable Fins, ASME Journal of Heat Transfer, vol. 125, pp: 282-288, 2003.
  • [74] Bassam, A.K., Abu, H., Enhanced Forced Convection Heat Transfer from a Cylinder Using Permeable Fins, ASME Journal of Heat Transfer, vol. 125, pp: 804-811, 2003.
  • [75] Ismail, F., Reza, M.O., Zobaer, M.A., Ali, M., Numerical Investigation of Turbulent Heat Convection from Solid Longitudinally Perforated Rectangular fins, Procedia Engineering, vol. 56, pp: 497-502, 2013.
  • [76] Jonsson, H., Moshfegh, B., Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks—Influence of Flow By Pass, IEEE Transactions on Components and Packaging Technologies, vol: 24, pp:142–149, 2001.
  • [77] Shaeri, M.R., Yaghoubi, M., Thermal Enhancement from Heat Sinks By Using Perforated Fins, Energy Conversion and Management, vol. 50, pp: 1264-1270, 2009.[78] Rouvreau S, David L, Calluaud D, Joulain P. Laminar junction flow at low Reynolds number: influence of the upstream region on the comparison between experiments and calculations. , Comptes Rendus Mécanique ,vol 333, pp: 265–272, 2005.
  • [79] Shaeri, MR., Jen, T.C., The Effects of Perforation Sizes on Laminar Heat Transfer Characteristics of an Array of Perforated Fins, Energy Conversion and Management, Vol. 64, pp: 328-334, 2012.
  • [80] Ismail, F., Hasan, M.N., Saha, S.C., Numerical Study of Turbulent Fluid Flow and Heat Transfer in Lateral Perforated Extended Surfaces, Energy, vol. 64, pp: 632-639, 2014.
  • [81] Shaeri, M.R., Yaghoubi, M., Jafarpur, K., Heat Transfer Analysis of Lateral Perforated Fin Heat Sinks, Applied Energy, Vol. 86, pp: 2019-2029, 2009.
  • [82] Vyas, A., Gupta, S., Gupta, S., Determining Relation among Shape of Perforation and Convective Heat Transfer from Lateral Fin Arrangement Using Simulation by Computational Fluid Dynamics, International Refereed Journal of Engineering and Science (IRJES), Vol. 5., pp: 24-31, 2016.
  • [83] Fujii, T., Imura, H., Natural-Convection Heat Transfer from a Plate with Arbitrary Inclination, International Journal of Heat and Mass Transfer, vol. 12, pp: 755-767, 1972.
  • [84] Mittelman, G., Dayan, A., Turjeman, K.D., Ullmann, A., Laminar Free Convection Underneath a Downward Facing Inclined Hot Fin Array, International Journal of Heat and Mass Transfer, vol. 50, pp: 2582-2589, 2007.
  • [85] Khudheyer, A.F., Hasan, Z.H., Effect of the Fins Configuration on Natural Convection Heat Transfer Experimentally and Numerically, International Journal of Energy and Environment, vol. 6, pp: 607-628, 2015.
  • [86] Naidu, S.V., Rao, D., Rao, B.G., Sombabu, A., Sreenivasulu, B., Natural Convection Heat Transfer from Fin Arrays- Experimental and Theoretical Study on Effect of Inclination of Base on Heat Transfer, ARPN Journal of Engineering and Applied Sciences, vol. 5, pp: 7-15, 2010.
  • [87] Rocha, A.D., Ganzarolli, M.M. Natural Convection in an Arbitrary Inclined Plate with Protruding Heated Elements, 18th International Conference of Mechanical Engineering, 2005, Brazil.
  • [88] Lee, J.B., Kim, H.J., Kim, D.K., Thermal Optimization of Horizontal Tubes with Tilted Rectangular Fins under Free Convection for the Cooling of Electronic Devices, Applied Sciences, vol: 7, 2017.
  • [89] Tari, I., Mehrtash, M., Natural Convection Heat Transfer From Inclined Plate- Fin Heat Sink, International Journal of Heat and Mass Transfer, s, vol. 56, pp: 574-593, 2013.[90] McAdams, W.H., Heat Transmission, McGraw-Hill, New York, 1954
  • [91] Churchill, S.W., Chu, H.H.S., Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate, International Journal of Heat and Mass Transfer, vol. 18, pp: 1323-1329, 1975
Toplam 87 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Makaleler
Yazarlar

Ece Ayli 0000-0002-6209-161X

Ender İnce Bu kişi benim 0000-0002-0761-6807

Yayımlanma Tarihi 19 Aralık 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 4 Sayı: 2

Kaynak Göster

APA Ayli, E., & İnce, E. (2018). REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS. Mugla Journal of Science and Technology, 4(2), 162-174. https://doi.org/10.22531/muglajsci.445045
AMA Ayli E, İnce E. REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS. MJST. Aralık 2018;4(2):162-174. doi:10.22531/muglajsci.445045
Chicago Ayli, Ece, ve Ender İnce. “REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS”. Mugla Journal of Science and Technology 4, sy. 2 (Aralık 2018): 162-74. https://doi.org/10.22531/muglajsci.445045.
EndNote Ayli E, İnce E (01 Aralık 2018) REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS. Mugla Journal of Science and Technology 4 2 162–174.
IEEE E. Ayli ve E. İnce, “REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS”, MJST, c. 4, sy. 2, ss. 162–174, 2018, doi: 10.22531/muglajsci.445045.
ISNAD Ayli, Ece - İnce, Ender. “REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS”. Mugla Journal of Science and Technology 4/2 (Aralık 2018), 162-174. https://doi.org/10.22531/muglajsci.445045.
JAMA Ayli E, İnce E. REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS. MJST. 2018;4:162–174.
MLA Ayli, Ece ve Ender İnce. “REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS”. Mugla Journal of Science and Technology, c. 4, sy. 2, 2018, ss. 162-74, doi:10.22531/muglajsci.445045.
Vancouver Ayli E, İnce E. REVIEW OF ENHANCEMENT OF HEAT TRANSFER FROM RECTANGULAR FIN ARRAYS. MJST. 2018;4(2):162-74.

5975f2e33b6ce.png
Muğla Sıtkı Koçman Üniversitesi Fen Bilimleri ve Teknoloji Dergisi Creative Commons Atıf-GayriTicari-AynıLisanslaPaylaş 4.0 Uluslararası Lisansı ile lisanslanmıştır.