A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE

Cilt: 4 Sayı: 1 1 Şubat 2009
  • Kursat Yildiz
  • Murat Çavus
PDF İndir
EN TR

A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE

Öz

In this research the use of silica fume in the mix proportion of adobe as a component and the strength of silica fume adobe is investigated. For this purpose, some amount of cement is added to the adobe, and 0%, 5%, 10% and 15% silica fume by weight of cement is added to the adobe mixture. Three samples from each of the percent classes are prepared. With these prepared samples, strength tests, water resistance tests, and wind resistance tests are conducted. According to the test results, the addition of silica fume to the adobe can be said to increase the strength and water resistance of adobe. According to the results of the wind resistance test, no significant change is observed in the samples that were painted with plastic paint. In the samples painted with lime, very fine visible cracks were formed and partial disintegrations were observed.

Anahtar Kelimeler

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

-

Yazarlar

Kursat Yildiz Bu kişi benim

Murat Çavus Bu kişi benim

Yayımlanma Tarihi

1 Şubat 2009

Gönderilme Tarihi

29 Ağustos 2014

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2009 Cilt: 4 Sayı: 1

Kaynak Göster

APA
Yildiz, K., & Çavus, M. (2009). A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE. Engineering Sciences, 4(1), 23-29. https://doi.org/10.12739/nwsaes.v4i1.5000067162
AMA
1.Yildiz K, Çavus M. A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE. Engineering Sciences. 2009;4(1):23-29. doi:10.12739/nwsaes.v4i1.5000067162
Chicago
Yildiz, Kursat, ve Murat Çavus. 2009. “A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE”. Engineering Sciences 4 (1): 23-29. https://doi.org/10.12739/nwsaes.v4i1.5000067162.
EndNote
Yildiz K, Çavus M (01 Şubat 2009) A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE. Engineering Sciences 4 1 23–29.
IEEE
[1]K. Yildiz ve M. Çavus, “A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE”, Engineering Sciences, c. 4, sy 1, ss. 23–29, Şub. 2009, doi: 10.12739/nwsaes.v4i1.5000067162.
ISNAD
Yildiz, Kursat - Çavus, Murat. “A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE”. Engineering Sciences 4/1 (01 Şubat 2009): 23-29. https://doi.org/10.12739/nwsaes.v4i1.5000067162.
JAMA
1.Yildiz K, Çavus M. A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE. Engineering Sciences. 2009;4:23–29.
MLA
Yildiz, Kursat, ve Murat Çavus. “A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE”. Engineering Sciences, c. 4, sy 1, Şubat 2009, ss. 23-29, doi:10.12739/nwsaes.v4i1.5000067162.
Vancouver
1.Kursat Yildiz, Murat Çavus. A RESEARCH ON THE PRODUCTION OF SILICA FUME ADOBE. Engineering Sciences. 01 Şubat 2009;4(1):23-9. doi:10.12739/nwsaes.v4i1.5000067162