Araştırma Makalesi
BibTex RIS Kaynak Göster

INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS

Yıl 2018, Cilt: 13 Sayı: 2, 57 - 67, 14.04.2018

Öz

Turkey
has many types of aggregates that have different chemical and physical
properties. Waste aggregates or low-cost aggregates must be evaluated in the
industry to benefit the environment. Turkey has large water reserves. Therefore,
the usability of natural aggregates, created by the sweeping of water in places
like river beds, lakes, and coasts, in industrial areas such as construction
and metallurgy should be investigated. Because these aggregates have a
quartzitic characteristic, it is also believed that their strength will be
high. In this study investigates the abrasion resistance of natural aggregates
with quartzite characteristics obtained from river beds in the Mediterranean
Region. This study aims to investigate the usability of these natural
aggregates in concrete. For the usability of these quartzitic natural
aggregates in concrete, it has been investigated whether they have the
appropriate abrasion value conforming the relevant Turkish Standard. Thus, it
is aimed to provide both an environmentally friendly production and economic
gain. The present study was carried out experimentally using the Los Angeles
test device for different test parameters. From this study, it has been
concluded that these natural aggregates can be used for the production of
concrete which has sufficient strength especially in terms of abrasion
resistance. The abrasion resistance of the aforementioned aggregates was
compared with the abrasion resistance of aggregates with different properties used
in previous studies.

Kaynakça

  • [1] Güner, M.S., (1999). Material Science–Building Materials and Concrete Technology. Bakanlar Medya, İstanbul, 18-65 (in Turkish).
  • [2] Kamanlı, M. and Balık, F.S., (2003). Concrete Technology. Atlas Yayıncılık, İstanbul, 13-35 (in Turkish).
  • [3] Simsek, O., (2000). Building Materials Cilt II. Ankara Üniversitesi Basımevi, Ankara, 26-58 (in Turkish).
  • [4] Güner, M.S., (1997). The Investigation of Utilization Possibility Rize-İyidere Agregates of Pit at The Concrete Product. Master Thesis, Gazi University, Ankara, 1-36 (in Turkish).
  • [5] Poitevin, P., (1999). Limestone aggregate concrete, usefulness and durability. Cement and Concrete Composites, 21, 89-97.
  • [6] Tuğrul, E., (2015). The Investigation of Abrasion Resistance of Aggregates Under Different Conditions. Master Thesis, Firat University, Elazığ (in Turkish).
  • [7] Temiz, H., Binici, H., Bodur, M.N., and Kara, O., (2006). Engineering Properties of the Natural Aggregates in Kahramanmaraş. KSU Journal of Science and Engineering, 9(2), 61-65 (in Turkish).
  • [8] Alyamaç, K.E. and Tuğrul, E., (2014). A Durable, Eco-Friendly and Aesthetic Concrete Work: Marble Concrete. In 11th International Congress on Advances in Civil Engineering (ACE 2014) (Vol:50, pp:21-25).
  • [9] Tuğrul, E., (2017). Investigation of Abrasion Resistance of Alacakaya Cherry Marble. 8th International Advanced Technologies Symposium, (4158-4166),4012-4020.
  • [10] Tuğrul Tunç, E., (2018). Determination of Los Angeles Abrasion Loss of the Basalt Aggregate Type of Elazığ Province. International Conference on Innovative Engineering Applications (CIEA-2018), (595-602).
  • [11] Postacıoğlu, B., (1987). Concrete (Aggregates, Concrete) Cilt II. Teknik Kitaplar Yayın Evi, İstanbul, 403 (in Turkish).
  • [12] Pul, S., (1994). Agrega Petrografik Yapısının Betonun Dayanım ve Akışkanlığı Üzerindeki Etkileri. Karadeniz Technical University, Master Thesis, Trabzon, 86s (in Turkish).
  • [13] Tunc, E.T., (2019). Recycling of marble waste: A review based on strength of concrete containing marble waste. Journal of environmental management, 231, 86-97, https://doi.org/10.1016/j.jenvman.2018.10.034.
  • [14] İpekoğlu, B., (1999). Quartz, Quartzite, Quartz Sand. İstanbul Maden İhracatçıları Birliği, Türkiye Endüstriyel Mineraller Envanteri, 102-106 (in Turkish).
  • [15] DPT Sekizinci Beş Yıllık Kalkınma Planı, (2001). Madencilik Özel İhtisas Komisyonu Raporu. Endüstriyel Hammaddeler Alt Komisyonu, Toprak Sanayii Hammaddeleri III (Kuvars kumu, Kuvarsit, Kuvars) Çalışma Grubu Raporu, Devlet Planlama Teşkilatı, Ankara (in Turkish).
  • [16] Akçıl, A., Tuncuk, A., and Deveci, H., (2007). Kuvarsın Saflaştırılmasında Kullanılan Kimyasal Yöntemlerin İncelenmesi. Bilimsel Madencilik Dergisi, 46(4), 3-10 (in Turkish).
  • [17] TS 802, (2016). Beton Karışım Tasarımı Hesap Esasları, Türk Standartları Enstitüsü, Ankara (in Turkish).
  • [18] TS EN 1097-2, 2010. Agregaların mekanik ve fiziksel özellikleri için deneyler, Türk Standartları Enstitüsü, Ankara (in Turkish).
  • [19] TS 706, (1981). Beton Agregaları. Türk standartları Enstitüsü, Ankara, (in Turkish).
  • [20] Temizel, K.E., (1998). Determination of Some Properties of Aggregates and Concrete Vvhich is Produced Using Those Aggregates from Kizilirmak River Basin, in Bafra Region, at Samsun. Master Thesis, Ondokuz Mayıs University, Samsun (in Turkish).
  • [21] Yıldırım, M. and Yılmaz, I., (2002). Yıldız ırmağı çökellerinin beton agregası olarak kullanılabilirliklerinin incelenmesi, Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi, 19(2), 181-192 (in Turkish).
  • [22] Sri Ravindrarajah, R. and Tam, C.T., (1985). Properties of Concrete made with Crushed Concrete As Coarse Aggregate. Magazine of concrete research, 37(130), 29-38.
  • [23] González-Fonteboa, B. and Martínez-Abella, F., (2008). Concretes with aggregates from demolition waste and silica fume. Materials and mechanical properties. Building and Environment, 43(4), 429-437.
  • [24] http://www.portalendustri.com.

INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS

Yıl 2018, Cilt: 13 Sayı: 2, 57 - 67, 14.04.2018

Öz

Turkey has many types of aggregates that have different chemical and physical properties. Waste aggregates or low-cost aggregates must be evaluated in the industry to benefit the environment. Turkey has large water reserves. Therefore, the usability of natural aggregates, created by the sweeping of water in places like river beds, lakes, and coasts, in industrial areas such as construction and metallurgy should be investigated. Because these aggregates have a quartzitic characteristic, it is also believed that their strength will be high. In this study investigates the abrasion resistance of natural aggregates with quartzite characteristics obtained from river beds in the Mediterranean Region. This study aims to investigate the usability of
these natural aggregates in concrete. For the usability of these quartzitic natural aggregates in concrete, it has been investigated whether they have the appropriate abrasion value conforming the relevant Turkish Standard. Thus, it is aimed to provide both an environmentally friendly production and economic gain. The present study was carried out experimentally using the Los Angeles test device for different test parameters. From this study, it has been concluded that these natural aggregates can be used for the production of concrete which has sufficient strength especially in terms of abrasion resistance. The abrasion resistance of the aforementioned aggregates was compared with the abrasion resistance of aggregates with different properties used in previous studies. 

Kaynakça

  • [1] Güner, M.S., (1999). Material Science–Building Materials and Concrete Technology. Bakanlar Medya, İstanbul, 18-65 (in Turkish).
  • [2] Kamanlı, M. and Balık, F.S., (2003). Concrete Technology. Atlas Yayıncılık, İstanbul, 13-35 (in Turkish).
  • [3] Simsek, O., (2000). Building Materials Cilt II. Ankara Üniversitesi Basımevi, Ankara, 26-58 (in Turkish).
  • [4] Güner, M.S., (1997). The Investigation of Utilization Possibility Rize-İyidere Agregates of Pit at The Concrete Product. Master Thesis, Gazi University, Ankara, 1-36 (in Turkish).
  • [5] Poitevin, P., (1999). Limestone aggregate concrete, usefulness and durability. Cement and Concrete Composites, 21, 89-97.
  • [6] Tuğrul, E., (2015). The Investigation of Abrasion Resistance of Aggregates Under Different Conditions. Master Thesis, Firat University, Elazığ (in Turkish).
  • [7] Temiz, H., Binici, H., Bodur, M.N., and Kara, O., (2006). Engineering Properties of the Natural Aggregates in Kahramanmaraş. KSU Journal of Science and Engineering, 9(2), 61-65 (in Turkish).
  • [8] Alyamaç, K.E. and Tuğrul, E., (2014). A Durable, Eco-Friendly and Aesthetic Concrete Work: Marble Concrete. In 11th International Congress on Advances in Civil Engineering (ACE 2014) (Vol:50, pp:21-25).
  • [9] Tuğrul, E., (2017). Investigation of Abrasion Resistance of Alacakaya Cherry Marble. 8th International Advanced Technologies Symposium, (4158-4166),4012-4020.
  • [10] Tuğrul Tunç, E., (2018). Determination of Los Angeles Abrasion Loss of the Basalt Aggregate Type of Elazığ Province. International Conference on Innovative Engineering Applications (CIEA-2018), (595-602).
  • [11] Postacıoğlu, B., (1987). Concrete (Aggregates, Concrete) Cilt II. Teknik Kitaplar Yayın Evi, İstanbul, 403 (in Turkish).
  • [12] Pul, S., (1994). Agrega Petrografik Yapısının Betonun Dayanım ve Akışkanlığı Üzerindeki Etkileri. Karadeniz Technical University, Master Thesis, Trabzon, 86s (in Turkish).
  • [13] Tunc, E.T., (2019). Recycling of marble waste: A review based on strength of concrete containing marble waste. Journal of environmental management, 231, 86-97, https://doi.org/10.1016/j.jenvman.2018.10.034.
  • [14] İpekoğlu, B., (1999). Quartz, Quartzite, Quartz Sand. İstanbul Maden İhracatçıları Birliği, Türkiye Endüstriyel Mineraller Envanteri, 102-106 (in Turkish).
  • [15] DPT Sekizinci Beş Yıllık Kalkınma Planı, (2001). Madencilik Özel İhtisas Komisyonu Raporu. Endüstriyel Hammaddeler Alt Komisyonu, Toprak Sanayii Hammaddeleri III (Kuvars kumu, Kuvarsit, Kuvars) Çalışma Grubu Raporu, Devlet Planlama Teşkilatı, Ankara (in Turkish).
  • [16] Akçıl, A., Tuncuk, A., and Deveci, H., (2007). Kuvarsın Saflaştırılmasında Kullanılan Kimyasal Yöntemlerin İncelenmesi. Bilimsel Madencilik Dergisi, 46(4), 3-10 (in Turkish).
  • [17] TS 802, (2016). Beton Karışım Tasarımı Hesap Esasları, Türk Standartları Enstitüsü, Ankara (in Turkish).
  • [18] TS EN 1097-2, 2010. Agregaların mekanik ve fiziksel özellikleri için deneyler, Türk Standartları Enstitüsü, Ankara (in Turkish).
  • [19] TS 706, (1981). Beton Agregaları. Türk standartları Enstitüsü, Ankara, (in Turkish).
  • [20] Temizel, K.E., (1998). Determination of Some Properties of Aggregates and Concrete Vvhich is Produced Using Those Aggregates from Kizilirmak River Basin, in Bafra Region, at Samsun. Master Thesis, Ondokuz Mayıs University, Samsun (in Turkish).
  • [21] Yıldırım, M. and Yılmaz, I., (2002). Yıldız ırmağı çökellerinin beton agregası olarak kullanılabilirliklerinin incelenmesi, Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi, 19(2), 181-192 (in Turkish).
  • [22] Sri Ravindrarajah, R. and Tam, C.T., (1985). Properties of Concrete made with Crushed Concrete As Coarse Aggregate. Magazine of concrete research, 37(130), 29-38.
  • [23] González-Fonteboa, B. and Martínez-Abella, F., (2008). Concretes with aggregates from demolition waste and silica fume. Materials and mechanical properties. Building and Environment, 43(4), 429-437.
  • [24] http://www.portalendustri.com.
Toplam 24 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Makaleler
Yazarlar

Esra Tugrul Tunc 0000-0001-9071-774X

Yayımlanma Tarihi 14 Nisan 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 13 Sayı: 2

Kaynak Göster

APA Tugrul Tunc, E. (2018). INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies, 13(2), 57-67.
AMA Tugrul Tunc E. INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies. Nisan 2018;13(2):57-67.
Chicago Tugrul Tunc, Esra. “INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS”. Qualitative Studies 13, sy. 2 (Nisan 2018): 57-67.
EndNote Tugrul Tunc E (01 Nisan 2018) INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies 13 2 57–67.
IEEE E. Tugrul Tunc, “INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS”, Qualitative Studies, c. 13, sy. 2, ss. 57–67, 2018.
ISNAD Tugrul Tunc, Esra. “INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS”. Qualitative Studies 13/2 (Nisan 2018), 57-67.
JAMA Tugrul Tunc E. INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies. 2018;13:57–67.
MLA Tugrul Tunc, Esra. “INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS”. Qualitative Studies, c. 13, sy. 2, 2018, ss. 57-67.
Vancouver Tugrul Tunc E. INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies. 2018;13(2):57-6.