EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING

Cilt: 4 Sayı: 2 1 Mart 2009
  • Hakan Mumcu
Technological Applied Sciences Kapak
Technological Applied Sciences
PDF İndir
EN TR

EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING

Öz

Incremental forming is an innovative and flexible process forming in which sheet metal is plastically deformed by a small tool through tool path occurred by CAD/CAM program. Small and medium volume complex parts can be produced by dieless forming inexpensively using this method. In this study, maximum forming angle in truncated pyramid geometry formed from Al-1050-H14 sheet metal without fracturing has been experimentally investigated. Also, wall thickness variations of the formed metal have been measured. The experimental studies were carried out on CNC vertical milling machine by using negative incremental forming. According to the experimental results, maximum forming angle has been obtained as èmax = 61o.

Anahtar Kelimeler

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

-

Yazarlar

Hakan Mumcu Bu kişi benim

Yayımlanma Tarihi

1 Mart 2009

Gönderilme Tarihi

8 Ağustos 2014

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2009 Cilt: 4 Sayı: 2

DOI

https://doi.org/10.12739/10.12739

IZ

https://izlik.org/JA95MY37JH

Kaynak Göster

RIS / Bibtex
APA
Mumcu, H. (2009). EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING. Technological Applied Sciences, 4(2), 182-191. https://doi.org/10.12739/10.12739
AMA
1.Mumcu H. EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING. Technological Applied Sciences. 2009;4(2):182-191. doi:10.12739/10.12739
Chicago
Mumcu, Hakan. 2009. “EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING”. Technological Applied Sciences 4 (2): 182-91. https://doi.org/10.12739/10.12739.
EndNote
Mumcu H (01 Mart 2009) EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING. Technological Applied Sciences 4 2 182–191.
IEEE
[1]H. Mumcu, “EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING”, Technological Applied Sciences, c. 4, sy 2, ss. 182–191, Mar. 2009, doi: 10.12739/10.12739.
ISNAD
Mumcu, Hakan. “EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING”. Technological Applied Sciences 4/2 (01 Mart 2009): 182-191. https://doi.org/10.12739/10.12739.
JAMA
1.Mumcu H. EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING. Technological Applied Sciences. 2009;4:182–191.
MLA
Mumcu, Hakan. “EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING”. Technological Applied Sciences, c. 4, sy 2, Mart 2009, ss. 182-91, doi:10.12739/10.12739.
Vancouver
1.Hakan Mumcu. EXPERIMENTAL INVESTIGATION OF MAXSIMUM FORMING ANGLE AND WALL THICKNESS VARIATION ON Al-1050 SHEET METAL IN NEGATIVE INCREMENTAL FORMING. Technological Applied Sciences. 01 Mart 2009;4(2):182-91. doi:10.12739/10.12739