EFFECT OF TIN ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF PM STEELS

Yıl 2017, Cilt: 12 Sayı: 4, 178 - 184, 20.10.2017

Mustafa Türkmen Hasan Karabulut , Mehmet Akif Erden , Süleyman Gündüz

https://izlik.org/JA78PX66MX

Öz

In this work, the effects of TIN additions on the
microstructures and tensile behaviors of microalloyed powder metallurgy (PM)
steels were investigated. The microstructure of the microaloyed PM steels was characterized
by optic microscope, SEM and EDS. Results indicated that the addition of TiN in
the percentage of 0.1, 0.2 or 0.5 increases the yield strength (YS) and
ultimate tensile strength (UTS) of the PM steels in the sintered conditions.
Elongation also tends to improve with increasing TiN content. In addition, TiN
prevented grain growth during sintering prior to cooling.

Anahtar Kelimeler

Powder Metallurgy , Microalloyed Steel , Tensile Strength , SEM , EDS

Kaynakça

• 1. Karaduman, B., (2010). Production and Characterization of Titanium Matrix Composites Reinforced Titanium Carbide, M.Sc. Thesis, Istanbul Technical University, Institute of Science and Technology, 1-15.
• 2. Erden, M.A., Gündüz, S., Türkmen, M., and Karabulut, H., (2014). Microstructural Characterization and Mechanical Properties of Microalloyed Powder Metallurgy Steels, Materials Science and Engineering A, 616, 201-206.
• 3. Gladman, T., (1997). The Physical Metallurgy of Microalloyed Steels, the Institue of Materials, England, 1, 341.
• 4. Sage, A.M., (1992). An Overview of the Use of Mikroalloys in HSLA Steels with Particular Reference to Vanadyum and Titanium, Processing, Properties and Applications, Proceedings of the Second International Conference on HSLA Steels, Beijing, China.
• 5. Karabulut, H. and Gündüz, S., (2004). Effect of Vanadium Content on Dynamic Strain Ageing in Microalloyed Medium Carbon Steel, Materials and Design, 25, 521–527.
• 6. Sarıtaş, S., Türker, M., and Durlu, N., (2007). Powder Metallurgy and Particulate Materials Processing, Turkish PM Publications, 05, 2-34, 206-237, 379-410.
• 7. Gladman, T. and Woodhead, J.H., (1960). The Accuracy of Point Counting in Metallographic Investigations, Journal of the Iron Steel, 194, 189-194.
• 8. Misra, R.D.K., Tenneti, K.K., Weatherly, G.C., and Tither G., (2003). Microstructure and Texture of Hot Rolled Cb-Ti and V-Cb Microalloyed Steels with Differences in Formability and Toughness, Metall. Mater. Trans. A, 34A, 2341–2351.
• 9. Schade, C., Murphy, T., Lawley, A., and Doherty, R., (2012). Microstrucure and Mechanical Properties of Microalloyed PM Steels, International Journal of Powder Metallurgy, 48(6):51-59.
• 10. Schade, C., Murphy, T., Lawley, A., and Doherty, R., (2012). Microstructure and Mechanical Properties of PM Steels Alloyed with Silicon and Vanadium, International Journal of Powder Metallurgy, 48(6):41-48.
• 11. Xiang-done, H., Xin-ping, M., and Sheng-xia, L., (2013). Effect of Annealing Temperature on Recrystallization Behavior of Cold Rolled Ti-microalloyed steel, J. of Iron and Steel Res Int., 20(9):105-110.
• 12. Korchynsky, M., (2001). The Use of Vanadium in Steel, Proceedings of the Vanitec Symposium, Beijing, China.