Design and Analysis of the Support System for the Exhaust Gas Aftertreatment Unit in Stage V Emission Tractors

Öz

In line with the increasing global environmental awareness, the goals of improving air quality and protecting public health necessitate the reduction of harmful pollutants emitted by diesel engines. In this context, the implementation of Stage 5 emission standards requires the integration of advanced exhaust gas aftertreatment systems into exhaust assemblies, such as Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), and Selective Catalytic Reduction (SCR). These systems play a critical role in reducing the environmental impact of internal combustion engines and contribute significantly to the goal of a more sustainable world. However, the mass of these systems and the vibrational loads to which they are subjected - particularly due to the severe excitation experienced during off-road agricultural operations - make the structural integrity of the supporting brackets critical. The structural durability of these components is of great importance to ensure safe, long-lasting, and trouble-free operation. In this study, the structural durability and vibrational behavior of a bracket designed to carry the exhaust gas aftertreatment system for a diesel engine used in tractors were investigated. A design optimization study was also conducted to achieve a safer and more efficient configuration. The structural performance of the bracket under static and dynamic loading was evaluated using Finite Element Analysis (FEA), considering vibration conditions arising from field operations. Additionally, modal analysis was performed to identify possible resonance conditions resulting from engine and chassis-induced vibrations. The findings indicate that the optimized bracket design enhances durability and service life, significantly reducing the risk of field failures. The improved design supports clean and efficient engine operation in compliance with Stage 5 emission standards, contributing positively to environmental performance.

Anahtar Kelimeler

• Bracket design
• Exhaust aftertreatment systems
• Emission
• Finite element analysis
• Structural analysis

Kaynakça

1. Gökçe E. Investigation of Performance and Emission Characteristics of a Domestic Tractor Engine for the Stage III-B Standard. Kocaeli University; 2022.
2. Özcan E. Theoretical Investigation and Application Regarding to 4 Valved Cylinder Head Design of a Turbo Diesel Tractor Engine Suited for Stage IIIB Emission Standart. Istanbul Technical University; 2009. http://dx.doi.org/10.29228/
3. Chakraborty A, Polisetti S, Jayaseelan J, Upadhyay R. Application of Reliability Technique for Developing a Test Methodology to Validate the Engine Mounted Components for Off-Road Applications Under Vibration. SAE Technical Paper Series. 2017 Sept 29. https://doi.org/10.4271/2017-01-7004
4. Perumal S, Kumar A, Mahajan A, Redkar D, Balakrishnan S. Field Failure Resolution of a Tractor Engine Exhaust System Using Constrained Single Objective Optimization and Stochastic Analysis. SAE International Journal of Commercial Vehicles. 2017 Jan 10;10(1):411–22. https://doi.org/10.4271/2017-26-0233.
5. DU Dong-hui, CAO Liu-jian, HE Ming-fei. Finite Element Analysis of After Treatment Mounting Bracket Based on Creo Simulation Software. Tractor & Farm Transporter. 2022;49(2):43-46.
6. XU Zhi-liang, LI Jing, ZHANG Lie-ming. Finite Element Analysis of Fixed Support for Tractor Compressor. Tractor & Farm Transporter, 2023;50(3):64-67.
7. Nareddiwar S, Dey T, Sunilkumar R. Packaging Design, Weld Fatigue Analysis and Validation of Diesel Exhaust After-treatment System. Mechanical Engineering Research. 2018 Nov 30;8(2):36. https://doi.org/10.5539/mer.v8n2p36
8. Mohapatra DP, Kangde S, Londhe A, Srikanth NN, Singh P. Powertrain Mounted Exhaust System Failure Correlation and Methodology Development in CAE. SAE Technical Paper Series. 2017 Jan 10. https://doi.org/10.4271/2017-26-0267

9. Gupta B, Li J, Singaravel V. Simulation Methodology for Failure Analysis of Catalytic Converter Mounting on Commercial Vehicles. SAE Technical Paper Series. 2024 Apr 9. https://doi.org/10.4271/2024-01-2247
10. Rahman S, Chakraborty A, Perumal S, Redkar D, Usulamarthi R, Singh R. Structural Development and Improvement of SCR Assembly Design for Exhaust After Treatment System of a Construction Equipment Off Highway Vehicle. SAE Technical Paper Series. 2024 Jan 16. https://doi.org/10.4271/2024-26-0091
11. Solanki AS, Jaju YR. Test Correlation of an Exhaust System Durability Failure Using Enhanced CAE Approach. SAE Technical Paper Series. 2019 Jan 9. https://doi.org/10.4271/2019-26-0293
12. P S, Sujatha C, K. C. Transient Fatigue Analysis of Exhaust System Mounting Brackets for Commercial Vehicle - Correlation. SAE Technical Paper Series. 2017 Mar 28. https://doi.org/10.4271/2017-01-1333
13. LI De-zhi, LIU Zhao-bin, YANG Yin, XIAO Yong, XING Shou-chen, ZHANG Lu-yun. Finite Element Analysis and Optimization of Mounting Bracket of Engine After-treatment System. Tractor & Farm Transporter. 2021;48(1):32-34.
14. Heuser P, Ghetti S, Rathod D, Petri S, Schoenfeld S. Bharat Stage VI Solutions for Commercial Engines for the India Market. SAE Technical Paper Series. 2017 Jan 10;1. https://doi.org/10.4271/2017-26-0043