Tailoring the Porosity and Breathability of Nanofiber Webs with Mesh Size of the Deposition Material

Yıl 2023, , 680 - 686, 30.06.2023

Çiğdem Akduman , Nida Oğlakçıoğlu

https://doi.org/10.16984/saufenbilder.1254690

Cited By: 1

Öz

Nano and micro-pores of the electrospun webs present good moisture vapor transmission rate, while it maintains resistance to pressured air and resistance to liquid for some type of clothing. Laminating a nanofiber web to any textile structure could improve the desired resistance to air permeability with providing excellent breathability. In the present study, hydrophobic thermoplastic polyurethane (TPU) and hydrophilic poly (vinyl alcohol) (PVA) nanofiber webs were produced onto three different chromium sieve wires and then laminated to an interlining fabric and compared in means of pore size, breathability, and air permeability. Mesh count of the wires affected the pore size and smallest pore size are belong to 90 mesh wire. The water vapor permeability of the samples varied between 80% and 90% as well as providing relatively low air permeability values. With increasing nanofiber amount, air permeability decreased dramatically.

Anahtar Kelimeler

Nanofibers, deposition time, mesh count, porosity, water vapor permeability, air permeability

Destekleyen Kurum

-

Proje Numarası

-

Teşekkür

-

Kaynakça

• [1] T. Subbiah, G.S. Bhat, R.W. Tock, S. Parameswaran, and S. S. Ramkumar, “Electrospinning of nanofibers”, Journal of Applied Polymer Ccience, vol. 96 no. 2, pp. 557-569, 2005.
• [2] S. Ramakrishna, K. Fujihara, W.E. Teo, T. Yong, Z. Ma, and R. Ramaseshan, “Electrospun nanofibers: solving global issues,” Materials Today, vol. 9 no. 3, pp. 40-50, 2006.
• [3] Ü. Kurtan, “Carbon nanofibers fabricated from electrospun nano-sized boron oxide/polyacrylonitrile nanofibers as electrode for supercapacitors,” Sakarya University Journal of Science, vol. 25 no.5, pp. 1180-1188, 2021.
• [4] I. Alghoraibi, S. Alomari, “Different Methods for Nanofiber Design and Fabrication” In Handbook of Nanofibers, A. Barhoum, M. Bechelany, A. Makhlouf, Springer International Publishing, Cham, Switzerland, 2018, 1170p.
• [5] W. E. Teo, and S. Ramakrishna, “A review on electrospinning design and nanofibre assemblies,” Nanotechnology, vol.17, no.14, pp. 1878-184, 2006. [6] M. A. A. De Prá, R. M. Ribeiro-do-Valle, M. Maraschin and B. Veleirinho, “Effect of collector design on the morphological properties of polycaprolactone electrospun fibers,” Materials Letters, vol. 193, pp. 154-157, 2007.
• [7] S. Ramakrishna, K. Fujihara, W. Teo, T. Lim, and Z. Ma, “Electrospinning Process” In An Introduction to Electrospinning and Nanofibers, World Scientific Publishing Co. Pte. Ltd., Singapore, 2005, 382p.
• [8] H. Liu and Y. L. Hsieh, “Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate,” Journal of Polymer Science Part B: Polymer Physics, vol.40, no.18, pp. 2119-2129, 2002.
• [9] M. Sattary, M. Rafienia, M. T. Khorasani and H. Salehi, “The effect of collector type on the physical, chemical, and biological properties of polycaprolactone/gelatin/nano‐hydroxyapatite electrospun scaffold,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 107, no.4, pp. 933-950, 2019.
• [10] Y. Wang, G. Wang, L. Chen, H. Li, T. Yin, B. Wang, J.C. Lee and Q. Yu, “Electrospun nanofiber meshes with tailored architectures and patterns as potential tissue-engineering scaffolds,” Biofabrication, vol. 1, no.1, 015001, 2009.
• [11] C. Akduman, N. Oğlakcıoğlu, P. A. Akcakoca Kumbasar, and Sarı, B. “Investigation of thermal comfort properties of electrospun nanofiber mats,” Journal of Fashion Technology and Textile Engineering, , vol.S4, no. 015, pp.1-3, 2018.
• [12] N. Oğlakcıoğlu, C. Akduman, and B. Sarı, “Investigation of thermal comfort properties of electrospun thermoplastic polyurethane fiber coated knitted fabrics for wind‐resistant clothing,” Polymer Engineering and Science, vol. 61, no.3, pp.669-679, 2021.
• [13] J.Sheng, J. Zhao, X. Yu, L. Liu, J. Yu, and B. Ding, “Electrospun nanofibers for waterproof and breathable clothing” In Electrospinning” In Nanofabrication and Applications, pp. 543-570, B. Ding,W. Xianfeng, Y. Jianyong (Eds), Elsevier Inc., Oxford, 2019, 806p.
• [14] B. Yoon and S. Lee, “Designing waterproof breathable materials based on electrospun nanofibers and assessing the performance characteristics,” Fibers and Polymers, vol. 12, no.1, pp. 57-64, 2011.
• [15] L. Sumin, D. Kimura, K. H. Lee, J. C. Park and I. S. Kim, “The effect of laundering on the thermal and water transfer properties of mass-produced laminated nanofiber web for use in wear,” Textile Research Journal, vol. 80, no.2, pp.99-105, 2010.
• [16] P. Gibson, M. Sieber, J. Bieszczad, J. Gagne, D. Fogg and J. Fan, “A Design Tool for Clothing Applications: Wind Resistant Fabric Layers and Permeable Vents,” Journal of Textiles, pp.1-7, 2014.
• [17] M. Gorji, M. Karimi and S. Nasheroahkam, “Electrospun PU/P (AMPS-GO) nanofibrous membrane with dual-mode hydrophobic–hydrophilic properties for protective clothing applications,” Journal of Industrial Textiles, vol.47, no.6, pp.1166-1184, 2018.
• [18] A. Sadighzadeh, M. Valinejad, A. Gazmeh and B. Rezaiefard, “Synthesis of polymeric electrospun nanofibers for application in waterproof‐breathable fabrics,” Polymer Engineering and Science, vol. 56, no.2, pp.143-149, 2016.
• [19] S. Ullah, M. Hashmi, N. Hussain, A. Ullah, M. N. Sarwar, Y. Saito, S. H. Kim and I. S. Kim, “Stabilized nanofibers of polyvinyl alcohol (PVA) crosslinked by unique method for efficient removal of heavy metal ions,” Journal of Water Process Engineering, vol 33, pp. 101111, 2020.
• [20] A. Çay, E. P. A. Kumbasar, Z. Keskin, Ç. Akduman and A. Ş. Ürkmez, “Crosslinking of poly (vinyl alcohol) nanofibres with polycarboxylic acids: biocompatibility with human skin keratinocyte cells,” Journal of Materials Science, vol. 52, no.20, pp.12098-12108, 2017.
• [21] A. Cay and M. Miraftab, “Properties of electrospun poly (vinyl alcohol) hydrogel nanofibers crosslinked with 1, 2, 3, 4‐butanetetracarboxylic acid,” Journal of Applied Polymer Science, vol.129, no.6, pp.3140-3149, 2013.
• [22] Ç. Akduman, E. P. Akçakoca Kumbasar and I. Özgüney, “Development and Characterization of Naproxen-Loaded Poly (Vinyl Alcohol) Nanofibers Crosslinked with Polycarboxylic Acids,” AATCC Journal of Research, vol. 5, no.1, pp. 29-38, 2018.
• [23] A. Pakolpakçil, Effect of Glutaraldehyde Crosslinking Parameters on Mechanical and Wetting Properties of PVA/NaAlg Electrospun Mat”, Sakarya University Journal of Science, vol. 26, no.5, pp 990-999, 2022.
• [24] A. Patanaik and R. D. Anandjiwala, “Modelling nonwovens using artificial neural networks” In Soft Computing in Textile Engineering, pp. 246-267, Woodhead Publishing, 2011.
• [25] T. Vadicherla and D. Saravanan, “Thermal comfort properties of single jersey fabrics made from recycled polyester and cotton blended yarns,” Indian Journal of Fibre and Textile Research, vol.42, no.3, pp.318-324, 2017.
• [26] M. Boguslawska-Baczek and L. Hes, “Effective water vapour permeability of wet wool fabric and blended fabrics,” Fibres and Textiles in Eastern Europe, pp. 67-71, vol. 21, no.1(97), 2013.
• [27] L. Hes. Permetest Manual, SENSORA [Online] Available:http://www.sensora.eu/PermetestManual09.pdf, 31 March 2023.
• [28] Y. Liu, R. Wang, H. Ma, B. S. Hsiao and B. Chu, “High-flux microfiltration filters based on electrospun polyvinylalcohol nanofibrous membranes,” Polymer, vol. 54, no.2, pp.548–556, 2013.
• [29] P. Gibson, H. Schreuder-Gibson and D. Rivin, “Transport properties of porous membranes based on electrospun nanofibers,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.187, pp.469-481, 2001.