Electrochemical Performances of NMC811 Lithium-Ion Pouch Cells under Dynamic Conditions

Yıl 2022, Cilt: 26 Sayı: 5, 858 - 866, 20.10.2022

Mahmud Tokur

https://doi.org/10.16984/saufenbilder.1128132

Öz

Lithium-ion batteries have a wide range of usage areas, from transportation to the defense industry, from daily usage to space applications. The widespread use of consumer electronics day by day also increases the need for this critical strategic technology, which allows us to live at almost every point of our lives without binding factors such as cables. But this technology also has many limitations, which dominate our lives so much that it needs to be overcome. Low cycle life due to poor electrochemical efficiency of electrode materials is one of these limitations. At the same time, energy density constraints are also an obstacle to many technological developments. Therefore, finding new materials with higher capacity and higher cycle life has become inevitable to meet the demands. Moreover, developing novel production techniques suitable for the materials used in the battery is also critical. Cylindrical cells are mostly used commercially in the market due to their easy and fast production technics and relatively safe components. However, the energy density and capacity limit of this architecture pushes the market to use alternative cell designs. There are different cell structures in the lithium-ion battery industry apart from cylindrical cells, such as button type, pouch type, and prismatic type. Among them, pouch cells have rising star geometry due to their unique properties and flexible production style. But many parameters still need to be overcome in pouch cells. In this study, the NMC811 cathode has been selected to investigate some critical parameters in lithium-ion pouch cells. The effects of dynamic conditions such as electrode film thickness, variable temperatures, and current rates on electrochemical performance were analyzed. Finally, a cycle life test was performed on the cell with optimum parameters.

Anahtar Kelimeler

Energy Storage, Lithium Ion Batteries, Pouch Cell, NMC Cathode

Destekleyen Kurum

TUBITAK TEYDEB BIGG-1512

Proje Numarası

2190317

Teşekkür

The author thanks the TUBITAK TEYDEB-BIGG-1512 program for their financial support under contract number 2190317.

Kaynakça

• [1] M. S. Patil, J. H. Seo, S. Panchal, M. Y. Lee, “Numerical study on sensitivity analysis of factors influencing liquid cooling with double cold‐plate for lithium‐ion pouch cell,” International Journal of Energy Research, vol. 45, no. 2, pp. 2533-2559, 2021.
• [2] E. Schuster, Z. Carlos, M. Andreas, R. Magnus, J. S. Hans, "Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell," Journal of Power Sources, vol. 286, pp. 580-589, 2015.
• [3] M. Tokur, A. Aydin, T. Cetinkaya, H. Akbulut, “Shoring up the lithium ion batteries with multi-component silicon yolk-shell anodes for grid-scale storage systems: experimental and computational mechanical studies,” Journal of The Electrochemical Society, vol. 164, no. 9, pp. A2238-A2251, 2017.
• [4] Y. Chen, Y. Hu, Z. Shen, R. Chen, X. He, X. Zhang, Y. Li, K. Wu, “Hollow core–shell structured silicon@ carbon nanoparticles embed in carbon nanofibers as binder-free anodes for lithium-ion batteries,” Journal of Power Sources, vol. 342, pp. 467-475, 2017.
• [5] T. Çetinkaya, "Synthesis, characterization and electrochemical performance of core/shell structured carbon coated silicon powders for lithium ion battery negative electrodes," Sakarya University Journal of Science, vol. 21, no. 3 pp. 489-495, 2017.
• [6] F. Hall, J. Touzri, S. Wußler, H. Buqa, W.G. Bessler, “Experimental investigation of the thermal and cycling behavior of a lithium titanate-based lithium-ion pouch cell,” Journal of Energy Storage, vol. 17, pp. 109-117, 2018.
• [7] J. Deng, C. Bae, A. Denlinger, T. Miller, “Electric vehicles batteries: requirements and challenges,” Joule, vol. 4, no. 3, pp. 511-515, 2020.
• [8] H. Köse, "Production and morphological characterization of tin dioxide nano thin films," Sakarya University Journal of Science, vol. 21, no. 6 pp. 1613-1619, 2017.
• [9] M. Tokur, M.Y. Jin, B.W. Sheldon, H. Akbulut, “Stress bearing mechanism of reduced graphene oxide in silicon-based composite anodes for lithium ion batteries,” ACS Applied Materials & Interfaces, vol. 12, no. 30, pp. 33855-33869, 2020.
• [10] H. Zheng, J. Li, X. Song, G. Liu, V.S. Battaglia, “A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes,” Electrochimica Acta, vol. 71, pp. 258-265, 2012.
• [11] J. Landesfeind, H.A. Gasteiger, “Temperature and concentration dependence of the ionic transport properties of lithium-ion battery electrolytes,” Journal of The Electrochemical Society, vol. 166, no. 14, pp. A3079, 2019.
• [12] R. He, T. Kyu, “Effect of plasticization on ionic conductivity enhancement in relation to glass transition temperature of crosslinked polymer electrolyte membranes,” Macromolecules, vol. 49, no. 15, pp. 5637-5648, 2016.
• [13] V. G. Choudhari, A.S. Dhoble, T.M. Sathe, “A review on effect of heat generation and various thermal management systems for lithium ion battery used for electric vehicle,” Journal of Energy Storage, vol. 32, pp.101729, 2020.