Enerji İçeceği ve %35 Hidrojen Peroksitin Güncel Restorasyon Malzemelerinin Renk Değişimleri ve Mikrosertlikleri Üzerindeki Etkisinin Değerlendirilmesi

Yıl 2023, Cilt: 10 Sayı: 3, 526 - 531, 25.12.2023

Recep Kara

https://doi.org/10.15311/selcukdentj.1244309

Öz

Amaç: Bu çalışma, %35 hidrojen peroksit ve gazlı enerji içeceğinin CAD/CAM hibrit blokların ve güncel kompozit reçinelerin mikrosertlik ve renk bozulmaları üzerine etkisini amaçlamıştır.
Gereç ve Yöntemler: Her bir materyalden (Tetric-N-Ceram=TNC, Estelite Sigma Quick=ESQ, Shofu HC=SH ve Vita Enamic=VE) onbeş disk (4x10 mm) numune üretildi. Her gruptan beş numune uygulama işlemine göre (gazlı enerji içeceğinde bekletme, 37 °C damıtılmış su içinde bekletme ve %35 hidrojen peroksit ağartma jeline maruz bırakma) rastgele ayrıldı. Numunelerin renk değişimi ve mikrosertliği, uygulamalardan önce ve sonra ölçüldü. Veriler Mann-Whitney-U, Wilcoxon sıralama toplamı testi, tek yönlü ANOVA ve post hoc testi ile analiz edildi (p>0.05).
Sonuçlar: Tüm gruplarda mikrosertlikte değişiklik görülmedi. Hidrojen peroksitine maruz bırakılan ESQ grubunda yüksek renk bozulması bulunurken, en düşük renk değişikliği VE grubunda bulundu. Enerji içeceği ve hidrojen peroksit, test materyallerinin mikrosertliğini etkilemez ancak renk bozulmasına neden olabilir.

Anahtar Kelimeler

Sertlik, Bilgisayar destekli tasarım, Enerji içecekleri, Hidrojen peroksit (H2O2), Kompozit Reçineler

Evaluation of the Effect of an Energy Drink And 35% Hydrogen Peroxide on Discoloration and Microhardness of Current Restorative Materials

Öz

Objective: This study aimed to determine the effect of 35% hydrogen peroxide and carbonated energy drinks on microhardness and discoloration of CAD/CAM hybrid blocks and existing composite resins.
Materials and Methods: Fifteen disc (4x10 mm) samples were produced from each material (Tetric-N-Ceram=TNC, Estelite Sigma Quick=ESQ, Shofu HC=SH and Vita Enamic=VE). Five samples from each group were randomly assigned according to the application procedure (soaking in an aerated energy drink, 37 °C distilled water, and exposure to 35% hydrogen peroxide bleach gel). The color change and microhardness of the samples were measured before and after the treatments. Data were analyzed with Mann-Whitney-U, the Wilcoxon rank-sum test, a one-way ANOVA, and a post hoc test (p>0.05).
Results: No change in microhardness was observed in all groups. The highest color change was found in the ESQ group exposed to hydrogen peroxide, while the lowest color change was found in the VE group. Energy drink and hydrogen peroxide do not affect the microhardness of test materials, but may cause discoloration.

Anahtar Kelimeler

Sertlik, Bilgisayar destekli tasarım, Enerji içecekleri, Hidrojen peroksit (H2O2), Kompozit Reçineler

Kaynakça

• 1. Barakah HM, Taher NM, Dentistry C, Arabia S. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material. The Journal of Prosthetic Dentistry.112:625-31.
• 2. Li RWK, Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: State of the art. Journal of Prosthodontic Research2014.
• 3. Nguyen JF, Ruse D, Phan AC, Sadoun MJ. High-temperature-pressure polymerized resin-infiltrated ceramic networks. Journal of Dental Research. 2014;93:62-7.
• 4. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dental Materials. 2013;29.
• 5. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006;95:137-42.
• 6. Erdemir U, Yildiz E, Eren MM, Ozel S. Surface hardness evaluation of different composite resin materials: Influence of sports and energy drinks immersion after a short-term period. Journal of Applied Oral Science. 2013;21:124-31.
• 7. Xu HHK, Quinn JB, Smith DT, Antonucci JM, Schumacher GE, Eichmiller FC. Dental resin composites containing silica-fused whiskers - Effects of whisker-to-silica ratio on fracture toughness and indentation properties. Biomaterials. 2002;23.
• 8. Hamouda IM. Effects of various beverages on hardness, roughness, and solubility of esthetic restorative materials. Journal of Esthetic and Restorative Dentistry. 2011;23.
• 9. Awliya WY, Al-Alwani DJ, Gashmer ES, Al-Mandil HB. The effect of commonly used types of coffee on surface microhardness and color stability of resin-based composite restorations. Saudi Dental Journal. 2010;22.
• 10. Yap AUJ, Wattanapayungkul P. Effects of in-office tooth whiteners on hardness of tooth-colored restoratives. Operative Dentistry. 2002;27.
• 11. Chongkavinit P, Anunmana C. Optical effect of resin cement, abutment material, and ceramic thickness on the final shade of CAD-CAM ceramic restorations. J Prosthet Dent. 2021;125:517.e1-.e8.
• 12. Lauvahutanon S, Shiozawa M, Takahashi H, Iwasaki N, Oki M, Finger WJ et al. Discoloration of various CAD/CAM blocks after immersion in coffee. Restorative Dentistry & Endodontics. 2017;42:9.
• 13. De Moraes RR, Marimon JLM, Jochims Schneider LF, Sinhoreti MAC, Correr-Sobrinho L, Bueno M. Effects of 6 months of aging in water on hardness and surface roughness of two microhybrid dental composites. Journal of Prosthodontics. 2008;17.
• 14. Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resin-based composites. Journal of the American Dental Association. 2004.
• 15. Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: Influence of beverages and brushing. Dental materials journal. 2012;31.
• 16. Kara R. Discoloration of CAD / CAM Blocks and Bulk-Fill Composite Resin Materials After Thermocycling. 2020;19:8-15.
• 17. Gaglianone LAg, Martins JDo, Rossi TRA, Saraiva LO, Cavalcanti ANó, Mathias P. Changes on the color parameters of air-abraded resin composite exposed to different colored beverages. Journal of investigative and clinical dentistry. 2011;2.
• 18. Barutcigil Ç, Yildiz M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. Journal of Dentistry. 2012;40.
• 19. Al-Dharrab A. Effect of energy drinks on the color stability of nanofilled composite resin. Journal of Contemporary Dental Practice. 2013;14.
• 20. Ardu S, Gutemberg D, Krejci I, Feilzer AJ, Di Bella E, Dietschi D. Influence of water sorption on resin composite color and color variation amongst various composite brands with identical shade code: An in vitro evaluation. Journal of Dentistry. 2011;39.
• 21. Douglas RD. Color stability of new-generation indirect resins for prosthodontic application. Journal of Prosthetic Dentistry. 2000;83.
• 22. Satou N, Khan AM, Matsumae I, Satou J, Shintani H. In vitro color change of composite-based resins. Dental Materials. 1989;5.