Dairesel Türbülatörler ile Asimetrik Trapez Dalgalı bir Kanalda Termohidrolik Performans Analizi

Öz

Bu çalışma, içerisine dairesel türbülatörler yerleştirilmiş asimetrik trapez dalgalı bir kanalda türbülanslı akışın ısı transferini analiz etmektedir. Çözümlerde, ANSYS Fluent programı kullanılmıştır. Çözümlerde, standart k-ε türbülans modeli kullanılmıştır. Dairesel türbülatörler kanal içine 3 farklı çapta (d: 2 mm, 4 mm, 6 mm) ve 3 farklı konumda (t: 7 mm, 9 mm ve 11 mm) yerleştirilmiş ve her birinin akış ve ısı transferi üzerindeki etkileri incelenmiştir. Çalışmada, Reynolds sayısı 3000≤Re≤10000 aralığında değiştirilmiş ve kanalın asimetrik dalgalı yüzeyleri TS=340 K sıcaklığında sabit tutulmuştur. Kanal içine farklı çap ve konumlarda yerleştirilen türbülatörler için farklı Reynolds sayılarında Nusselt sayısı (Nu), iyileşme oranı (η), basınç düşüşü (ΔP) ve termohidrolik performans (THP) değerleri hesaplanmıştır. Ayrıca elde edilen sonuçlar, türbülatörlerin olmadığı asimetrik trapez dalgalı kanal ile karşılaştırılmıştır. Çalışma sonucunda, farklı parametrelerde kanal içinde hız ve sıcaklık görüntüleri sunulmuştur. Bulgular, türbülatör çapının ve konumunun basınç düşüşünü ve ısı transferini etkilediğini göstermiştir. Re=10000, d=6 mm ve t=7 mm parametreleri için ısı transferinin türbülatörsüz kanala göre 1.31 kat iyileştiği tespit edilmiştir. En yüksek termohidrolik performans Re=3000, d=6 mm ve t=11 mm durumunda THP=1.14 olarak bulunmuştur.

Anahtar Kelimeler

• Asimetrik trapez kanal
• dairesel türbülatörler
• ısı transferi
• sayısal çalışma

Destekleyen Kurum

TÜBİTAK

Proje Numarası

Proje No: 1919B012319076, 2209A Üniversite Öğrencileri Araştırma Projeleri Destekleme Programı, 2023-2

Thermohydraulic Performance Analysis in an Asymmetric Trapezoidal Wavy Channel with Circular Turbulators

Öz

This numerical study analyzes the heat transfer of turbulent flow in an asymmetric trapezoidal wavy channel with circular turbulators. The ANSYS Fluent program was used for the solutions. The standard k-ε turbulence model was used in the solutions. Circular turbulators were placed in the channel with 3 different diameters (d: 2 mm, 4 mm, 6 mm) and 3 different positions (t: 7 mm, 9 mm, 11 mm) and the effects of each on the flow and heat transfer were investigated. In the study, the Reynolds number was changed in the range of 3000≤Re≤10000, and the asymmetric wavy surfaces of the channel were kept constant at TS=340 K. Nusselt number (Nu), enhancement ratio (η), pressure drop (ΔP), and thermohydraulic performance (THP) values were calculated for different Reynolds numbers, different turbulator diameters and positions in the channel. In addition, the results obtained were compared with the asymmetric trapezoidal wavy channel without turbulators. As a result of the study, velocity and temperature images were presented in the channel for different parameters. The findings showed that the turbulator diameter and position affect the pressure drop and heat transfer. It was found that for the parameters Re=10000, d=6 mm, and t=7 mm, the heat transfer was improved by 1.31 times compared to the channel without a turbulator. The highest thermohydraulic performance was found to be THP=1.14 for Re=3000, d=6 mm, and t=11 mm.

Anahtar Kelimeler

• Asymmetric trapezoidal channel
• circular turbulators
• heat transfer
• numerical study

Proje Numarası

Proje No: 1919B012319076, 2209A Üniversite Öğrencileri Araştırma Projeleri Destekleme Programı, 2023-2

Kaynakça

1. Murshed, S. M. S., & Nieto de Castro C. A. (2017). A critical review of traditional and emerging techniques and fluids for electronics cooling. Renewable and Sustainable Energy Reviews, 78, 821–833. https://doi.org/10.1016/j.rser.2017.04.112
2. Ajarostaghi, S. S., Zaboli, M., Javadi, H., Badenes, B., & Urchueguia, J. F. (2022). A review of recent passive heat transfer enhancement methods. Energies, 15(3), 986. https://doi.org/10.3390/en15030986
3. Zhang, J., Zhu, X., Mondejar, M. E., & Haglind, F. (2019). A review of heat transfer enhancement techniques in plate heat exchangers. Renewable and Sustainable Energy Reviews, 101, 305-328. https://doi.org/10.1016/j.rser.2018.11.017
4. Alam, T., & Kim, M. H. (2018). A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications. Renewable and Sustainable Energy Reviews, 81, 813-839. https://doi.org/10.1016/j.rser.2017.08.060
5. Kurtulmuş, N., Zontul, H., & Sahin, B. (2020). Heat transfer and flow characteristics in a sinusoidally curved converging-diverging channel. International Journal of Thermal Sciences, 148, 106163. https://doi.org/10.1016/j.ijthermalsci.2019.106163
6. Kurtulmus, N., & Sahin, B. (2019). A review of hydrodynamics and heat transfer through corrugated channels. International Communications in Heat and Mass Transfer, 108, 104307. https://doi.org/10.1016/j.icheatmasstransfer.2019.104307
7. Kumar, K., Kumar, R., Bharj, R. S., & Mondal, P. K. (2021). Irreversibility analysis of the convective flow through corrugated channels: A comprehensive review. European Physical Journal Plus, 136(4), 1–40. https://doi.org/10.1140/epjp/s13360-021-01388-x
8. Alfellag, M. A., Ahmed, H. E., Jehad, M. G., & Farhan, A. A. (2022). The hydrothermal performance enhancement techniques of corrugated channels: A review. Journal of Thermal Analysis and Calorimetry, 147, 10177-10206. https://doi.org/10.1007/s10973-022-11247-1

9. Sharma, A. & Khan, M. K. (2023). Heat transfer and flow characteristics of varying curvature wavy microchannels. International Journal of Thermal Sciences, 185, 108096. https://doi.org/10.1016/j.ijthermalsci.2022.108096
10. Krishnan, E. N., Ramin, H., Guruabalan, A., & Simonson, C. J. (2021). Experimental investigation on thermo-hydraulic performance of triangular cross-corrugated flow passages. International Communications in Heat and Mass Transfer, 122, 105160. https://doi.org/10.1016/j.icheatmasstransfer.2021.105160
11. Li, Z-X., Sung, S-Q., Wang, C., Liang, C-H., Zeng, S., Zhong, T., Hud, W-P., & Feng, C-N. (2022). The effect of trapezoidal baffles on heat and flow characteristics of a cross-corrugated triangular duct. Case Studies in Thermal Engineering, 33, 101903. https://doi.org/10.1016/j.csite.2022.101903
12. Zontul, H., Hamzah, H., Kurtulmuş, N., & Şahin, B. (2021). Investigation of convective heat transfer and flow hydrodynamics in rectangular grooved channels. International Communications in Heat and Mass Transfer, 126, 105366. https://doi.org/10.1016/j.icheatmasstransfer.2021.105366
13. Nakhchi, M. E. (2019). Experimental optimization of geometrical parameters on heat transfer and pressure drop inside sinusoidal wavy channels. Thermal Science and Engineering Progress, 9, 121–131. https://doi.org/10.1016/j.tsep.2018.11.006
14. Liu, X., Fu, Y., Wang, J., Zhang, H., & Zhu, J. (2022). Investigation on flow and heat transfer in rectangular cross-section sinusoidal channels. International Journal of Thermal Sciences, 176, 107490. https://doi.org/10.1016/j.ijthermalsci.2022.107490
15. Togun, H., Homod, R. Z., Yaseen, Z. M., Abed, A. M., Dhabab, J. M., Ibrahem, R. K., Dhahbi, S., Rashidi, M. M., Ahmadi, G., Yaïci, W. A., & Mahdi, J. M. (2022). Efficient heat transfer augmentation in channels with semicircle ribs and hybrid Al2O3-Cu/water nanofluids. Nanomaterials, 12(15), 2720. https://doi.org/10.3390/nano12152720
16. Akcay, S. (2023). Heat transfer analysis of pulsating nanofluid flow in a semicircular wavy channel with baffles. Sādhanā, 48, 57. https://doi.org/10.1007/s12046-023-02119-x
17. Ajeel, R. K., Sopian, K., & Zulkifli, R. (2021). A novel curved-corrugated channel model: thermal-hydraulic performance and design parameters with nanofluid. International Communications in Heat and Mass Transfer, 120, 105037. https://doi.org/10.1016/j.icheatmasstransfer.2020.105037
18. Uysal, D., & Akçay, S. (2024). Numerical study of thermal and hydrodynamic characteristics of turbulent flow in hybrid corrugated channels with different wave profiles. Journal of Mechanical Engineering and Sciences, 18(2), 10026–10045. https://doi.org/10.15282/jmes.18.2.2024.5.0792
19. Zhang, L., & Che, D. (2011). Influence of corrugation profile on the thermalhydraulic performance of cross-corrugated plates. Numerical Heat Transfer, Part A: Applications, 59 (4) 267–296. https://doi.org/10.1080/10407782.2011.540963
20. Ahmed, M., Yusoff, M., Ng, K., & Shuaib, N. (2014). Effect of corrugation profile on the thermal–hydraulic performance of corrugated channels using CuO–water nanofluid. Case Studies in Thermal Engineering, 4, 65-75. https://doi.org/10.1016/j.csite.2014.07.001
21. Salami, M., Khoshvaght-Aliabadi, M., & Feizabadi, A. (2019). Investigation of corrugated channel performance with different wave shapes. Journal of Thermal Analysis and Calorimetry, 138(5), 3159–3174. https://doi.org/10.1007/s10973-019-08361-y
22. Nitturi, L. K., Kapu, V. K. S., Gugulothu, R., Kaleru, A., Vuyyuri, V., & Farid, A. (2023). Augmentation of heat transfer through passive techniques. Heat Transfer, 52(6), 4422-4449. https://doi.org/10.1002/htj.22877
23. Kanchan, B. K., Chandan, G. K., & Kumar, J. (2024). Effect of obstacle configuration in sinusoidal bfsc on hydrothermal performance and irreversibility characteristics: A numerical study. Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 48, 145–162. https://doi.org/10.1007/s40997-023-00649-7
24. Raza, A., Hasnain, J., Shah, S. S., Haq, R. U., & Alhushaybari, A. (2024). Influence of solid cylinders on fluid flow and thermal analysis in a curved channel with constant magnetic field. International Communications in Heat and Mass Transfer, 158, 107887. https://doi.org/10.1016/j.icheatmasstransfer.2024.107887
25. Zheng, Y., Yang, H., Mazaheri, H., Aghaei, A., Mokhtari, N., & Afrand, M. (2021). An investigation on the influence of the shape of the vortex generator on fluid flow and turbulent heat transfer of hybrid nanofluid in a channel. Journal of Thermal Analysis and Calorimetry, 143,1425–1438. https://doi.org/10.1007/s10973-020-09415-2
26. Naderifar, A., Nikian, M, Javaherdeh, K., & Borji, M. (2022). Numerical investigation of the effect of fins on heat transfer enhancement of a laminar non-newtonian nanofluid flow through a corrugated channel. Journal of Thermal Analysis and Calorimetry, 147, 9779-9791. https://doi.org/10.1007/s10973-022-11222-w
27. Akcay, S. (2023). Numerical study of turbulent heat transfer process in different wavy channels with solid and perforated baffles. Heat Transfer Research, 54(18), 53-82. https://doi.org/ 10.1615/HeatTransRes.2023046621
28. Acır, A., Ata, I., & Canlı, M. E. (2016). Investigation of effect of the circular ring turbulators on heat transfer augmentation and fluid flow characteristic of solar air heater. Experimental Thermal and Fluid Science, 77, 45-54. http://dx.doi.org/10.1016/j.expthermflusci.2016.04.012
29. Acır, A., & Ata, I. (2016). A study of heat transfer enhancement in a new solar air heater having circular type turbulators. Journal of the Energy Institute, 89, 606-616. http://dx.doi.org/10.1016/j.joei.2015.05.008