Performance-Based Design and Design Process of Kinetic Facade Systems

Öz

Kinetic façade systems, which increase the comfort of the occupants by interacting with the external environment and/or occupants interior space thanks to their adaptability function, and providing high daylight performance on the façade and energy efficiency throughout the life cycle of the building, offer efficient and effective solutions, as a sunshade shell. The optimum adaptability performance of the sunshade components that form the kinetic façade depends on the design and design process of these façades. In this context, in the design process where the morphological (physical-formal) structure of the kinetic facade is modeled and its kinetic transformation is designed, its functional properties are determined and performance analyzes have happened; The design approaches adopted, the design systems used and the design procedures created by the tools, methods, and techniques required by these systems gain importance. Within the scope of the study, it is aimed to reveal the relationship between the performance-based design of kinetic facade systems and the design process. For this purpose, comparative analysis and evaluation of the kinetic facade design samples were determined after the literature review has been done.In the conclusion section of the study, general determinations were made about performance-based optimum kinetic facade design and design process based on the findings, and the lack of studies on the design of these systems in the literature was mentioned and it was suggested that design methods and approaches in this field should be increased and developed.

Anahtar Kelimeler

• Kinetic Facade Design
• Kinetic Facade Design Process
• Parametric And Algorithmic Design
• Performance-Based Design
• Facade Design Optimization

Kinetik Cephe Sistemlerinin Performansa Dayalı Tasarımı ve Tasarım Süreci

Öz

Uyarlanabilir olma fonksiyonu sayesinde dış çevreyle ve/veya iç mekandaki kullanıcılarla etkileşime girip cephede günışığına bağlı yüksek performans ve binanın yaşam döngüsü boyunca enerji etkinliği sağlayarak kullanıcıların konforunu arttıran kinetik cephe sistemleri, güneş kırıcı bir kabuk olarak verimli ve efektif çözümler sunmaktadır. Kinetik cepheyi oluşturan güneş kırıcı bileşenlerin optimum uyarlanabilirlik performansını göstermesi, bu cephelerin tasarımına ve tasarım sürecine bağlıdır. Bu bağlamda, kinetik cephenin morfolojik (fiziksel-biçimsel) yapısının modellenip kinetik dönüşümü tasarımının yapıldığı, fonksiyonel özelliklerinin belirlendiği ve performans analizlerinin gerçekleştiği tasarım sürecinde; benimsenen tasarım yaklaşımları, kullanılan tasarım sistemleri ve bu sistemlerin gerektirdiği araç, yöntem ve tekniklerin bir araya gelerek oluşturduğu tasarım prosedürleri önem kazanmaktadır. Çalışma kapsamında, kinetik cephe sistemlerinin performansa dayalı tasarımı ile tasarım sürecinin ilişkisini ortaya koymak amaçlanmıştır. Bu amaçla önce literatür taraması, sonrasında belirlenen kinetik cephe tasarım örneklerinin karşılaştırmalı analizi ve değerlendirmesi yapılmıştır. Çalışmanın sonuç bölümünde, elde edilen bulgulardan yola çıkarak performansa dayalı optimum kinetik cephe tasarımı ve tasarım sürecine dair genel tespitler yapılmış ve literatürdeki bu sistemlerin tasarımına ilişkin çalışmaların eksikliğinden bahsedilip bu alandaki tasarım yöntem ve yaklaşımlarının arttırılıp geliştirilmesi gerektiği önerilmiştir.

Anahtar Kelimeler

• Cephe Tasarımı
• Kinetik Cephe Tasarım Süreci
• Parametrik ve Algoritmik Tasarım
• Performansa Dayalı Tasarım
• Cephe Tasarımı Optimizasyonu

Kaynakça

1. Akipek, F. Ö., & İnceoğlu, N. (2007). Bilgisayar destekli tasarım ve üretim teknolojilerinin mimarlıktaki kullanımları. Megaron Yıldız Teknik Üniversitesi E-Dergisi, 2(4), 237-253.
2. Albag, O., Anishchenko, M., Grassi, G., & Paoletti, I. (2020). Adaptive skins: towards new material systems. Digital transformation of the design, construction and management processes of the built environment, 209-219.
3. Alkhatib, H., Lemarchand, P., Norton, B., & O'Sullivan, D. T. J. (2021) Deployment and control of adaptive building facades for energy generation, thermal insulation, ventilation and daylighting: A review. Applied Thermal Engineering, 185, 116331. https://doi.org/10.1016/j.applthermaleng.2020.116331
4. Alkhayyat, J. (2013). Design strategy for adaptive kinetic patterns: creating a generative design for dynamic solar shading systems. (M.a. Thesis. Manchester: University of Salford School Of Build Environment MSc Digital Architectural Design). Manchester, England, https://www.academia.edu/6978438/Design_strategy_for_adaptive_kinetic_patterns_creating_a_generative_design_for_dynamic_solar_shading_system
5. Alotaibi, F. (2015). The role of kinetic envelopes to improve energy performance in buildings. Journal of Architectural Engineering Technology, 4(3), 149-153. DOI:10.4172/2168-9717.1000149
6. Arida, S. (2004). Contextualizing generative design. (Doctoral dissertation. Massachusetts Institute of Technology). Cambridge, US, https://core.ac.uk/download/pdf/4385734.pdf
7. Barozzi, M., Lienhard, J., Zanelli, A., & Monticelli, C. (2016). The sustainability of adaptive envelopes: developments of kinetic architecture. Procedia Engineering, 155, 275-284 https://doi.org/10.1016/j.proeng.2016.08.029
8. Davis, D., Burry, J., & Burry, M. (2011, July). Untangling parametric schemata: enhancing collaboration through modular programming. Proceedings of the 14th İnternational Conference on Computer Aided Architectural Design, University of Liege, Liege, 55-68. https://www.researchgate.net/publication/228843549_Untangling_Parametric_Schemata_Enhancing_Collaboration_through_Modular_Programming

9. Elkhayat, Y. O. (2014). Interactive movement in kinetic architecture. JES. Journal of Engineering Sciences, 42(3), 816-845. DOI:10.21608/jesaun.2014.115027
10. Elmokadem, A., Ekram, M., Waseef, A., & Nashaat, B. (2018). Kinetic architecture: concepts, history and applications. International Journal of Science and Research (IJSR), 7(4): 750-758. DOI:10.21275/ART20181560
11. Figliola, A. (2023). Digital workflow for climate resilient building façade generation. Building Research & Information, 51(3), 257-278. https://doi.org/10.1080/09613218.2022.2121907
12. Formentini, M., & Lenci, S. (2018). An innovative building envelope (kinetic façade) with Shape Memory Alloys used as actuators and sensors. Automation in Construction, 85, 220-231. https://doi.org/10.1016/j.autcon.2017.10.006
13. Fox, M. A., & Yeh, B. P. (1999 December). Intelligent kinetic systems in architecture. In Managing Interactions in Smart Environments: 1st International Workshop on Managing Interactions in Smart Environments (MANSE’99), Dublin, 91-103.
14. Güzer, C.A., Kahraman, İ., Kanan, N.Ö, Tombak, E., Kabakçı, O.K., Gül, K. (2016, Mayıs). Bütünleşik bina tasarımı yaklaşımı ile proje geliştirme süreci uygulama kılavuzu. Enerji ve Tabii Kaynaklar Bakanlığı Yenilenebilir Enerji Genel Müdürlüğü, Çankaya, Ankara. https://webdosya.csb.gov.tr/db/meslekihizmetler/ustmenu/ustmenu838.pdf
15. Haghighat, S., & Sadeh, H. (2023). Parametric design of an automated kinetic building façade using BIM: A case study perspective. Journal of Building Engineering, 73, 106800. https://doi.org/10.1016/j.jobe.2023.106800
16. Heidari Matin, N., & Eydgahi, A. (2022). Technologies used in responsive facade systems: a comparative study. Intelligent buildings international, 14(1), 54-73. https://doi.org/10.1080/17508975.2019.1577213
17. Henríquez, D., Herrera, R. F., & Vielma, J. C. (2022). Method for designing prequalified connections using generative design. Buildings, 12(10): 1579. https://doi.org/10.3390/buildings12101579
18. Hosseini, S. M., Mohammadi, M., & Guerra-Santin, O. (2019). Interactive kinetic façade: Improving visual comfort based on dynamic daylight and occupant's positions by 2D and 3D shape changes. Building and Environment, 165, 106396. https://doi.org/10.1016/j.buildenv.2019.106396
19. Hosseini, S. M., Mohammadi, M., Schröder, T., & Guerra-Santin, O. (2020). Integrating interactive kinetic façade design with colored glass to improve daylight performance based on occupants’ position. Journal of Building Engineering, 31, 101404. https://doi.org/10.1016/j.jobe.2020.101404
20. Hosseini, S. M., Mohammadi, M., Schröder, T., & Guerra-Santin, O. (2021). Bio-inspired interactive kinetic façade: Using dynamic transitory-sensitive area to improve multiple occupants’ visual comfort. Frontiers of Architectural Research, 10(4), 821-837. https://doi.org/10.1016/j.foar.2021.07.004
21. Khoo, C. K. (2013). Morphing architecture with responsive material systems (Doctoral dissertation, RMIT University). https://researchrepository.rmit.edu.au/esploro/outputs/doctoral/Morphing-architecture-with-responsive-material-systems/9921861599501341
22. Khidmat, R. P., Fukuda, H., Paramita, B., Qingsong, M., & Hariyadi, A. (2022). Investigation into the daylight performance of expanded-metal shading through parametric design and multi-objective optimisation in Japan. Journal of Building Engineering, 51, 104241. https://doi.org/10.1016/j.jobe.2022.104241
23. Knippers, J., Scheible, F., Oppe, M., & Jungjohann, H. (2012 July). Bio-inspired kinetic gfrp-façade for the thematic pavilion of the expo 2012 in yeosu. International Symposium of Shell and Spatial Structures IASS 2012, 90(6), 341-347. Seoul, South Korea. https://www.researchgate.net/publication/311534824_Bio-inspired_Kinetic_GFRP-facade_for_the_Thematic_Pavilion_of_the_EXPO_2012_in_Yeosu
24. Kolarevic, B. (2003). Designing and manufacturing architecture in the digital age. (1st ed.) Taylor & Francis https://doi.org/10.4324/9780203634561
25. Le-Thanh, L., Le-Duc, T., Ngo-Minh, H., Nguyen, Q. H., & Nguyen-Xuan, H. (2021). Optimal design of an Origami-inspired kinetic façade by balancing composite motion optimization for improving daylight performance and energy efficiency. Energy, 219, 119557. https://doi.org/10.1016/j.energy.2020.119557
26. Leach, N. (2009). Digital morphogenesis. Architectural Design, 79(1), 32-37. https://doi.org/10.1002/ad.80
27. Loonen, R. C., Favoino, F., Hensen, J. L., & Overend, M. (2017). Review of current status, requirements and opportunities for building performance simulation of adaptive facades. Journal of Building Performance Simulation, 10(2), 205-223. https://doi.org/10.1080/19401493.2016.1152303
28. Ma, W., Wang, X., Wang, J., Xiang, X., & Sun, J. (2021). Generative design in building information modelling (BIM): approaches and requirements. Sensors, 21, 21(16), 5439. https://doi.org/10.3390/s21165439
29. Mahmoud, A. H. A., & Elghazi, Y. (2016). Parametric-based designs for kinetic facades to optimize daylight performance: Comparing rotation and translation kinetic motion for hexagonal facade patterns. Solar Energy, 126, 111-127. https://doi.org/10.1016/j.solener.2015.12.039
30. Mallasi, Z. (2018). Using parametric BIM integration for prototyping future responsive façades. Journal of Facade Design and Engineering, 6(1): 89-100. https://doi.org/10.7480/jfde.2018.1.1865
31. Megahed, N. A. (2017). Understanding kinetic architecture: typology, classification, and design strategy. Architectural Engineering and Design Management, 13(2): 130-146. https://doi.org/10.1080/17452007.2016.1203676
32. Menges, A., & Ahlquist, S. (2011). Computational design thinking: computation design thinking. John Wiley & Sons.
33. Nagy, Z., Svetozarevic, B., Jayathissa, P., Begle, M., Hofer, J., Lydon, G., Willmann, A., & Schlueter, A. (2016). The adaptive solar facade: from concept to prototypes. Frontiers of Architectural Research, 5(2), 143-156. https://doi.org/10.1016/j.foar.2016.03.002
34. Oxman, R. (2006). Theory and design in the first digital age. Design Studies, 27(3): 229-265. doi:10.1016/j.destud.2005.11.002
35. Oxman, R., Gu, N. (2015 16-18 September). Theories and models of parametric design thinking. Proceedings of the 33rd eCAADe Conference. 2, 477-482, Vienna, Austria. DOI:10.52842/conf.ecaade.2015.2.477
36. Panya, D. S., Kim, T., & Choo, S. (2020). A methodology of interactive motion facades design through parametric strategies. Applied Sciences, 10(4), 1218. doi: https://doi.org/10.3390/app10041218
37. Radwan, G. A., & Osama, N. (2016). Biomimicry, an approach, for energy effecient building skin design. Procedia Environmental Sciences, 34, 178-189. https://doi.org/10.1016/j.proenv.2016.04.017
38. Ramzy, N., & Fayed, H. (2011). Kinetic systems in architecture: New approach for environmental control systems and context-sensitive buildings. Sustainable Cities and Society, 1(3): 170-177. https://doi.org/10.1016/j.scs.2011.07.004
39. Reichert, S., Menges, A., & Correa, D. (2015). Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness. Computer-Aided Design, 60, 50-69. https://doi.org/10.1016/j.cad.2014.02.010
40. Sadegh, S. O., Gasparri, E., Brambilla, A., & Globa, A. (2022). Kinetic facades: An evolutionary-based performance evaluation framework. Journal of Building Engineering, 53, 104408. https://doi.org/10.1016/j.jobe.2022.104408
41. Samir, H., Shahin, M. (2018). Adaptive building envelopes of multistory buildings as an example of high performance building skins. Alexandria Engineering Journal, 58(1), 346-348. https://doi.org/10.1016/j.aej.2018.11.013
42. Sankaewthong, S., Horanont, T., Miyata, K., Karnjana, J., Busayarat, C., & Xie, H. (2022). Using a biomimicry approach in the design of a kinetic façade to regulate the amount of daylight entering a working space. Buildings, 12(12), 2089. https://doi.org/10.3390/buildings12122089
43. Schleicher, S., Lienhard, J, Poppinga, S., Speck, T., Knippers, J. (2015). A methodology for transferring principles of plant movements to elastic systems in architecture. Computer-Aided Design, 60, 105-117 https://doi.org/10.1016/j.cad.2014.01.005
44. Seyrek, C. I., Widera, B., & Woźniczka, A. (2021). Sustainability-related parameters and decision support tools for kinetic green façades. Sustainability, 13(18): 10313. https://doi.org/10.3390/su131810313
45. Shen, Y. T., & Lu, P. W. (2016, March). The development of kinetic façade units with BIM-based active control system for the adaptive building energy performance service. International Conference of the Association for Computer-Aided Architectural Design Research in Asia CAADRIA 517-526. DOI:10.52842/conf.caadria.2016.517
46. Shen, Y. T., & Wu, T. Y. (2016 17-22 July). Sync-BIM: the interactive BIM-Based platform for controlling data-driven kinetic façade. HCI International 2016–Posters' Extended Abstracts: 18th International Conference, HCI International Proceedings Part II, 445-450, Toronto, Canada. DOI:10.1007/978-3-319-40542-1_72
47. Sherbini, K., & Krawczyk, R. (2004 December). Overview of intelligent architecture. 1st ASCAAD International Conferencee-Design İn Architecture KFUPM, 137-152. Dhahran, Saudi Arabia. https://www.ascaad.org/conference/2004/pdfs/paper10.pdf
48. Soleimani, A. (2019 18-20 October). Computational Design Thinking and Thinking Design Computing. 2019 Reynolds Symposium: Education by Design, Portland, US. https://www.wiley.com/en-sg/Computational+Design+Thinking:+Computation+Design+Thinking-p-9780470665701
49. Stevenson, C. M. (2011 March). Morphological principles: current kinetic architectural structures. Conference: In Adaptive Architecture, 1-12. Building Centre Trust and the University of Nottingham, London. https://www.researchgate.net/publication/316885581_Morphological_Principles_of_Current_Kinetic_Architectural_Structures
50. Tabadkani, A., Roetzel, A., Li, H. X., & Tsangrassoulis, A. (2021). A review of occupant-centric control strategies for adaptive facades. Automation in Construction, 122, 103464. https://doi.org/10.1016/j.autcon.2020.103464
51. Tabadkani, A., Shoubi, M. V., Soflaei, F., & Banihashemi, S. (2019). Integrated parametric design of adaptive facades for user's visual comfort. Automation in Construction, 106, 102857. https://doi.org/10.1016/j.autcon.2019.102857
52. Wang, J., Li, J., Chen, X. (2010 17-19 December). Parametric design based on building ınformation modeling for sustainable buildings. 2010 International Conference on Challenges in Environmental Science and Computer Engineering, 237-238. Chengdu, China. doi: DOI: 10.1109/ICCIS.2010.351
53. Yekutiel, T. P., and Y. J. Grobman. (2014). Controlling Kinetic Cladding Components in Building Facades: A Case for Autonomous Movement. The proceeding of 19th international conference of the association of computer-aided architectural design research in Asia, Hong Kong. DOI:10.52842/conf.caadria.2014.129
54. URL-1: https://www.arkitektuel.com/fun-palace-cedric-price/ Erişim Tarihi: 16.04.2023
55. URL-2: https://www.arkitektuel.com/plug-in-city/ Erişim Tarihi: 16.04.2023
56. URL-3: https://www.imarabe.org/en/architecture Erişim Tarihi: 16.04.2023
57. URL-4: https://nedkahn.com/portfolio/wind-veil / Erişim Tarihi: 17.04.2023
58. URL-5: https://igsmag.com/features/case-studies/the-al-bahar-towers-shading-the-real-envelope/ Erişim Tarihi: 17.04.2023
59. URL-6: https://www.evolo.us/opening-of-the-thematic-pavilion-for-the-expo-2012-yeosu-south-korea-soma/ Erişim Tarihi: 17.04.2023
60. URL-7: https://arquitecturaviva.com/works/media-tic-building Erişim Tarihi: 17.04.2023