F ve C Sınıfı Uçucu Küllerin Betonun Mekanik Özelliklerine Etkisinin Karşılaştırılması

Öz

Bu çalışmada, F ve C sınıfı uçucu küllerin betonun mekanik özelliklerine etkisinin karşılaştırılması amaçlanmıştır. Bu amaç doğrultusunda, beton üretimine katkı olarak %15, %20 ve %25 oranında F ve C sınıfı uçucu kül ayrı ayrı kullanılarak beton üretimi yapılmıştır. Üretilen numunelere mekanik deneyler (basınç dayanımı, eğilme dayanımı) uygulanmıştır. Deneyler sonucunda elde edilen veriler grafiklere aktarılıp yorumlanmıştır. Sonuç olarak, C sınıfı uçucu külün F sınıfı uçucu küle kıyasla daha yüksek basınç dayanımı ve daha iyi eğilme dayanımı sağladığı görülmüştür. Ayrıca uçucu kül gibi atıkların beton endüstrisinde kullanılmasıyla atıkların bertaraf edilmesine katkıda bulunulacağı sonucuna varılmıştır.

Anahtar Kelimeler

• Beton,Uçucu Kül,Atık,Mekanik Özellik

Comparison of the Effect of F and C Class Fly Ash on the Mechanical Properties of Concrete

Öz

In this study, it was aimed to compare the effect of F and C class fly ash on the mechanical properties of concrete. For this purpose, 15%, 20% and 25% F and C class fly ash were produced separately as a contribution to the production of concrete. Mechanical experiments (compressive strength, bending strength) were applied to the produced samples. The data obtained as a result of the experiments are transferred to the graphics and interpreted. The data obtained as a result of the experiments are transferred to the graphics and interpreted. In addition, it has been concluded that wastes such as fly ash will contribute to the disposal of waste by using it in the concrete industry.

Anahtar Kelimeler

• Concrete,Mechanical properties,fly ash

Kaynakça

1. [1] Al Martini, S. Khartabil, A. & Sabouni, A. (2017). Sustainable Concrete Using Recycled Aggregate and Supplementary Cementitious Materials. In the proceeding of the CSCE Annual Conference May 31 – June 3, 2017, Vancouver, Canada.
2. [2] Al-Martini, S. & Al-Khatib M. (2016). An Experimental Study on Self Consolidating Concrete (SCC) under Hot Weather and Hauling Time, Key Engineering Materials Journal, http://dx.doi.org/10.4028/www.scientific.net/kem.677.3.
3. [3] Al-Khatib, M. & S. Al-Martini (2016). Experimental Investigation on the effect of silica fume on Green self-consolidating concrete under extreme conditions, Toronto’2016 AES-ATEMA International Conference (, CANADA: July 2 – 5, 2016) “Advances and Trends in Engineering Materials and their Applications”.
4. [4] Al-Martini, S. & Al-Khatib M. (2017). Rheology of Self Consolidating Concrete (SCC) under Extreme Conditions, ICE Construction Materials Journal, in press, (SCOPUS), https://doi.org/10.1680/jcoma.17.00017.
5. [5] Khartabil, A. & Al Martini, S. (2019). Fresh and Mechanical Properties of Sustainable Concrete Using Recycled Aggregates, Key Engineering Materials, 803, 239-245.
6. [6] Al-Khatib, M. & Al-Martini S., (2017). Predicting the Rheology of Self Consolidating Concrete under Hot Weather, ICE Construction Materials Journal 170(2), 1-11.
7. [7] Ondrej, Z. Ondrej, H & Pavel, R. (2015), Frost Resistance of Concrete Screed with the Fly Ash Addition, Key Engineering Materials, 677, 80-85.
8. [8] Yilmaz A. & Degirmenci N., (2009). Possibility of using waste tire rubber and flyash with Portland cement as construction materials, Waste Management, 29(5), 1541-1546.

9. [9] Lee S, Chon CM. Glass Content In Coal-Fıred Fly Ash For Geopolymer Productıon. In: Fly Ash, Nova Science Publishers, Chapter 4, 2017.
10. [10] Han Z. Dissolution Kinetics of Alumina by Leaching Coal Fly Ash with Ammonium Hydrogen Sulfate, [Doktora Tezi] Shenyang: Shenyang University of Technology; 2016.
11. [11] Arel HS and Shaikh FUA. Effects of fly ash fineness, nano silica, and curing types on mechanical and durability properties of fly ash mortars. Structural Concrete, vol. 19, no. 2, pp. 597–607, 2018.
12. [12] Reiterman, P., Holčapek, O., Jogl, M., Konvalinka, P., Physical and Mechanical Properties of Composites Made with Aluminous Cement and Basalt Fibers Developed for High Temperature Application, Advances in Materials Science and Engineering, Article ID 703029, in press.
13. [13] Çiçek, T. & Çinçin, Y., (2015). Use of fly ash in production of light-weight building bricks. Construction and Building Materials, 94, 521-527.
14. [14] Pavlík Z, Záleská M, Pavlíková M. Experımental Analysıs Of Lıght-Weıght Concrete Incorporatıng Regranulated Waste Polypropylene. 17 th International Multidisciplinary Scientific GeoConference SGEM 2017, Section Green Buildings Technologies and Materials.
15. [15] Ganjian, E., Khorami, M. & Maghsoudi, A. A., (2009). Scrap-tyre rubber replacement for aggregate and filler in concrete, Construction and Building Materials, 23 (5),1828-1836.
16. [16] Mao M, Zhang D, Yang Q, and Zhang W. Study of durability of concrete with fly ash as fine aggregate under alternative interactions of freeze-thaw and carbonation. Advances in Civil Engineering, 2019(15) pages, 2019.
17. [17] Seo T, Lee M, Choi C, and Ohno Y. Properties of drying shrinkage cracking of concrete containing fly ash as partial replacement of fine aggregate, Magazine of Concrete Research, 62(6), p. 427433, 2010.
18. [18] Bilir T, Gencel O, and Topcu IB. Properties of mortars with fly ash as fine aggregate, Construction and Building Materials, vol. 93, pp. 782–789, 2015.
19. [19] Zhang D., Han P., Yang Q & Mao M. Shrinkage Effects of Using Fly Ash instead of Fine Aggregate in Concrete Mixtures. Hindawi Advances in Materials Science and Engineering Volume 2020, 11.
20. [20] Neville, A. M.(2009). Properties of concrete. 2009. New York. pp. 503-661. ISBN 0-582-23070-5.