Project, Development and Test of an Artificial Multifunctional Foot

Yıl 2015, Cilt: 1 Sayı: 1, 31 - 34, 01.01.2015

João Almeida Pedro Lobarinhas Luís Ferreira Da Silva Maria José Ferreira Abílio Leite Alfredo Araújo Fernando Sousa

https://doi.org/10.18186/jte.42089

Cited By: 1

Öz

The main purpose of this project is the development of a multifunctional artificial foot, capable of duplicate a human foot in a laboratory environment, in order to evaluate and simulate footwear’s performance under certain conditions. This foot is used as a laboratory prototype and is multisegmented, in order that each section is controlled independently in terms of heat generation and sweating rate, therefore it is possible to simulate more accurately the real behaviour of a human foot. The device produces thermal insulation values that will help to design footwear with better ability in terms of thermal comfort, replacing human volunteers in thermal comfort perception tests, which are very subjective. The prototype was already tested, and preliminary results indicated that thermal insulation values are within the range of expected values produced by other foot thermal manikins and by human volunteers’ tests. This fact suggests that this lab prototype can be used in future thermal comfort evaluations

Anahtar Kelimeler

Footwear testing; thermal comfort; lab prototype; sweating; thermal insulation

Project, Development and Test of an Artificial Multifunctional Foot

Öz

Anahtar Kelimeler

-

Kaynakça

• Babic, M., Lenarcic, J., Zlajpah, L., Taylor, N., Mekjavic, I., 2008. A Device for Simulating the Thermoregulatory Responses of the Foot: Estimation of Footwear Insulation and Evaporative Resistance. Journal of Mechanical Engineering, Vol. 54, Nº 9, p. 628-638.
• International Standards Office, 2004. ISO 15831 Measurement of thermal insulation by means of a thermal manikin.
• Kuklane, K., 1999. Foowear for cold environments: thermal properties, performance and testing. Ph.D. Lulea University of Technology.
• Kuklane, K., Holmér, I., Anttonen, H., Burke, R., Doughty, P., Endrusick, T., Hellsten, M., Shen, Y., Uedelhoven,W., 2003. Interlaboratory tests on thermal foot models. Thermal Environment Laboratory, EAT report, Lund University, Sweden.
• Kuklane, K., (in press) Standard test method for measuring the thermal insulation and evaporative resistance of footwear using a heat foot model. Thermal Environmental Laboratory, Lund Institute of Technology, Sweden. (Accepted for publication 2007).
• Mcguffin, R., Burke, R., Huizenga, C., Hui, Z., Vlahinos, A., Fu, G., 2002. Human thermal comfort model and manikin. In: SAE Future Car Congress. USA, 2002.
• Psikuta, A., Rossi,R., 2010. Opportunities and Constraints of Presently Used Thermal Manikins When Used for Simulation of the Human Body. In: Proceedings of the 8th International Meeting for Manikins and Modelling. Victoria, Canada, 2010.
• Strickland, P., Reid, G., Burrows, B., 1997. Thermal profiles in footwear design: an in-sole measurement system. In: 4th Annual Conference on Mechatronics and Machine Vision in Practice. Australia, 1997.
• Taylor, N.A.S., Caldwell, J.N., Mekjavic, I.B., 2006. The sweating foot: local differences in sweat secretion during exercise-induced Environmental Medicine, Vol. 77, nº10. Aviation, Space and
• Uedelhoven,W., Kurz, B., 1999. CYBOR sweating concept. In: Proceedings of the Third International Meeting on Thermal Manikin Testing 3IMM. Sweden, 2001.
• Yuhong, S., Zhihua, J., 2001. Measurement and evaluation of heat-moisture comfort of footwear. In: Proceedings of the Fourth International Meeting on Thermal Manikins. EMPA, Switzerland, 2001.