ANALYSIS ON SOLAR PANEL PERFORMANCE AND PV-INVERTER CONFIGURATION FOR TROPICAL REGION

Yıl 2017, Cilt: 3 Sayı: 3, 1259 - 1270, 01.07.2017

E. A. Setiawan

https://doi.org/10.18186/journal-of-thermal-engineering.323392

Cited By: 5

Öz

In this paper, proper inverter topology for tropical region will be determined with temperature effect as a
considered factor. PV characteristics on certain temperature are obtained through mathematical equations in
MATLAB-Simulink and it will be represented by PV I-V and P-V characteristic curves. Based on the modeling,
some PV parameters such as temperature coefficients of short circuit current (ISC), open circuit voltage (VOC),
maximum output power (PMAX), and maximum power voltage (VMP) can be determined as high as 0.56%/oC,
-0.31%/oC -0.4%/oC, and 0.43 %/oC respectively. As the result, for tropical region, the central inverter is the
most proper inverter topology to supply 5 kWAC PV system, string inverter in the 2nd place, and AC module with
utility rates of 97.34%, 96.32 %, and 88.1% based on direct measurement on PV panel’s temperature respectively.
From NOCT approach, the utility rates are around 92.96 % for central inverter, 91.98% for string inverter and 91.8
% for AC module. 

Anahtar Kelimeler

Photovoltaic, PV-Inverter Configuration, PV Modeling, Solar Panel Characteristics, Temperature, Tropics

Kaynakça

• [1]Solar Metric (2010) Guide to Interpreting I-V Curve Measurements of PV Arrays. Available on http://www.solmetric.com/
• [2]Bowden, Stuart, Honsberg, Christiana. (2013). Instructions on Photovoltaic. http://www.pveducation.org/
• [3]A. Green, M. (1998). Solar Cells Operating Principles, Technology and System Applications. Kensington: The University of New South Wales.
• [4]Meteoblue (2015). General Climate Zone. Available on https://content.meteoblue.com/en/meteoscool/generalclimate-zones/tropical-zone
• [5]Cramer, G.; Ibrahim, M.; Kleinkauf, W.: PV System Technologies – State of the Art and Trends in Decentralised Electrification. reFOCUS, January/February 2004.
• [6]Shivananda Pukhrem (2013). A PHOTOVOLTAIC PANEL MODEL IN MATLAB/SIMULINK. Available on http://www.researchgate.net/publication/255721161
• [7]Bowden, Stuart, Honsberg, Christiana. (2013). Nominal Operating Cell Temperature. http://www.pveducation.org/.
• [8]N.H. Zaini, M. Z. Ab Kadir, M. Izadi, N.I. Ahmad, M.A.M Radzi and N. Azis. (2015). The Effect of Temperature on a Mono-crystalline Solar PV Panel. IEEE Conference on Energy Conversion (CENCON). Pages: 249 - 253, DOI: 10.1109/CENCON.2015.7409548