Durability Characteristics of Concrete Containing Perlite and Recycled Aggregates

Öz

The construction industry is increasingly focused on sustainable concrete solutions to mitigate the environmental impacts of cement production, natural aggregate depletion, and construction and demolition waste generation. This study examines the combined use of ground expanded perlite (GEP) as a partial replacement for Portland cement, expanded perlite (EP) as a fine aggregate substitute, and recycled concrete aggregate (RCA) as a replacement for natural coarse aggregate. Mechanical performance and durability characteristics, including compressive strength, carbonation resistance, chloride permeability, acid resistance, sorptivity, and ultrasonic pulse velocity, were experimentally evaluated. Results revealed that concrete incorporating 10% GEP, 20% EP, and 25% RCA exhibited superior strength and durability compared to other replacement levels and the control mix. Statistical modeling showed strong agreement with experimental results, identifying optimal factor levels of 9.25% GEP, 21.02% EP, and 25.02% RCA with an overall desirability of 0.844. The study confirms the effectiveness of developing eco-efficient, durable concrete while supporting circular economy principles.

Anahtar Kelimeler

• Durability
• expanded perlite
• recycled aggregates
• carbonation
• acid attack
• absorption.

Kaynakça

1. N. Ankur, N. Singh, Strength characterization and sustainability assessment of coal bottom ash concrete, Environ. Sci. Pollut. Res. (2024). https://doi.org/10.1007/s11356-024-33303-z.
2. P. Kumar, D. Pasla, J.S. Thiyagarajan, Synergetic effect of coarse sintered fly ash aggregates and supplementary cementitious materials in self-compacting concrete: From durability and corrosion perspective, J. Build. Eng. 108 (2025) 112969. https://doi.org/10.1016/j.jobe.2025.112969.
3. D.A. Adesanya, A.A. Raheem, A Study of the Permeability and Acid Attack of Corncob Ash Blended Cements., Constr. Build. Mater. 24 (2010) 403–409. https://doi.org/10.1016/j.conbuildmat.2009.02.001.
4. N. Ankur, N. Singh, Permeation, Toxicity, and Sustainability Assessment of Thermal Coal-Residue Concrete, J. Mater. Civ. Eng. 38 (2026) 1–25. https://doi.org/10.1061/jmcee7.mteng-21661.
5. İ.B. Topçu, B. Işıkdağ, Effect of expanded perlite aggregate on the properties of lightweight concrete, J. Mater. Process. Technol. 204 (2008) 34–38. https://doi.org/10.1016/j.jmatprotec.2007.10.052.
6. M. Bakhshi, A. Dalalbashi, H. Soheili, Energy dissipation capacity of an optimized structural lightweight perlite concrete, Constr. Build. Mater. 389 (2023) 131765. https://doi.org/10.1016/j.conbuildmat.2023.131765.
7. J. Fořt, A. Afolayan, I. Medveď, L. Scheinherrová, R. Černý, A review of the role of lightweight aggregates in the development of mechanical strength of concrete, J. Build. Eng. 89 (2024) 109312. https://doi.org/10.1016/j.jobe.2024.109312.
8. R. Demirboğa, R. Gül, The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete, Cem. Concr. Res. 33 (2003) 723–727. https://doi.org/10.1016/S0008-8846(02)01032-3.

9. O. Gencel, O. Yavuz Bayraktar, G. Kaplan, O. Arslan, M. Nodehi, A. Benli, A. Gholampour, T. Ozbakkaloglu, Lightweight foam concrete containing expanded perlite and glass sand: Physico-mechanical, durability, and insulation properties, Constr. Build. Mater. 320 (2022) 126187. https://doi.org/10.1016/j.conbuildmat.2021.126187.
10. R. Demirboğa, İ. Örüng, R. Gül, Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes, Cem. Concr. Res. 31 (2001) 1627–1632. https://doi.org/10.1016/S0008-8846(01)00615-9.
11. B. Sharma, R.D. Sharma, N. Ankur, N. Singh, K. Sarkar, Evaluating the carbonation resistance of mortars made with industrial byproducts, Sustain. Mater. Civ. Infrastruct. (2024) 65–89. https://doi.org/10.1016/B978-0-443-16142-1.00004-5.
12. P. Kumar, P. Dinakar, T.J. Saravanan, Development and performance analysis of structural lightweight aggregate self-compacting concrete: A sustainable solution, Process Saf. Environ. Prot. 197 (2025) 107052. https://doi.org/10.1016/j.psep.2025.107052.
13. A. El Mir, S.G. Nehme, J.J. Assaad, Durability of self-consolidating concrete containing natural waste perlite powders, Heliyon. 6 (2020). https://doi.org/10.1016/j.heliyon.2020.e03165.
14. U.S. Geological Survey, Mineral Commodity Summaries of Perlite and pumicite, (2023) 2022–2023.
15. Ken Research, Global Perlite Market, (n.d.). https://www.kenresearch.com/global-perlite-market.
16. B. Sharma, R. Sharma, P.P. Bansal, Effect of fine aggregate replacement with expanded perlite and pumice on the development of lightweight concrete, Aust. J. Civ. Eng. 20 (2022) 115–129. https://doi.org/10.1080/14488353.2021.1930635.
17. J. Esfandiari, P. Loghmani, Effect of perlite powder and silica fume on the compressive strength and microstructural characterization of self-compacting concrete with lime-cement binder, Measurement. 147 (2019) 106846. https://doi.org/10.1016/j.measurement.2019.07.074.
18. S.-M. Alexa-Stratulat, G. Taranu, A.-M. Toma, I. Olteanu, C. Pastia, G. Bunea, I.-O. Toma, Effect of expanded perlite aggregates and temperature on the strength and dynamic elastic properties of cement mortar, Constr. Build. Mater. 438 (2024) 137229. https://doi.org/10.1016/j.conbuildmat.2024.137229.
19. M.S. Whwah, M.S. Radhi, A. Dulaimi, L.F.A. Bernardo, T.P. Ribeiro, Simultaneous Effects of Perlite Fine Aggregate and Silica Fume on the Physical Properties of Lightweight Cement Mortars, CivilEng. 6 (2025) 51. https://doi.org/10.3390/civileng6030051.
20. P. V. Premalatha, M. Geethanjali, T. Rahuraman, S. Gurusaran, Experimental Study on concrete behaviour with Partial Replacement of M-Sand with Unexpanded Perlite, E3S Web Conf. 405 (2023). https://doi.org/10.1051/e3sconf/202340503020.
21. S.M.M. Karein, A. Joshaghani, A.A. Ramezanianpour, S. Isapour, M. Karakouzian, Effects of the mechanical milling method on transport properties of self-compacting concrete containing perlite powder as a supplementary cementitious material, Constr. Build. Mater. 172 (2018) 677–684. https://doi.org/10.1016/j.conbuildmat.2018.03.205.
22. S. Urhan, Alkali silica and pozzolanic reactions in concrete. Part 2: Observations on expanded perlite aggregate concretes, Cem. Concr. Res. 17 (1987) 465–477. https://doi.org/10.1016/0008-8846(87)90010-X.
23. M. Arifuzzaman, H.S. Kim, Novel mechanical behaviour of perlite/sodium silicate composites, Constr. Build. Mater. 93 (2015) 230–240. https://doi.org/10.1016/j.conbuildmat.2015.05.118.
24. K. Muthusamy, M.H. Rasid, G.A. Jokhio, A.M.A. Budiea, M.W. Hussin, J. Mirza, Coal bottom ash as sand replacement in concrete: A review, Constr. Build. Mater. 236 (2020) 1–12. https://doi.org/10.1016/j.conbuildmat.2019.117507.
25. T.K. Erdem, Ç. Meral, M. Tokyay, T.Y. Erdoğan, Use of perlite as a pozzolanic addition in producing blended cements, Cem. Concr. Compos. 29 (2007) 13–21. https://doi.org/10.1016/j.cemconcomp.2006.07.018.
26. L.-H. Yu, H. Ou, L.-L. Lee, Investigation on pozzolanic effect of perlite powder in concrete, Cem. Concr. Res. 33 (2003) 73–76. https://doi.org/10.1016/S0008-8846(02)00924-9.
27. F. Bektas, L. Turanli, P.J.M. Monteiro, Use of perlite powder to suppress the alkali–silica reaction, Cem. Concr. Res. 35 (2005) 2014–2017. https://doi.org/10.1016/j.cemconres.2004.10.029.
28. Ł. Kotwica, W. Pichór, E. Kapeluszna, A. Różycka, Utilization of waste expanded perlite as new effective supplementary cementitious material, J. Clean. Prod. 140 (2017) 1344–1352. https://doi.org/10.1016/j.jclepro.2016.10.018.
29. A. Sahraei Moghadam, F. Omidinasab, S. Moazami Goodarzi, Characterization of concrete containing RCA and GGBFS: Mechanical, microstructural and environmental properties, Constr. Build. Mater. 289 (2021) 123134. https://doi.org/10.1016/j.conbuildmat.2021.123134.
30. M. Safiuddin, U.J. Alengaram, M.M. Rahman, M.A. Salam, M.Z. Jumaat, Use of recycled concrete aggregate in concrete: A review, J. Civ. Eng. Manag. 19 (2013) 796–810. https://doi.org/10.3846/13923730.2013.799093.
31. IS 8112 2013, Ordinary Portland Cement, 43 Grade — Specification ( Second Revision), 2013.
32. IS 383: 2016, Coarse and fine aggregate for concrete - specification (third revision), 2016.
33. N. Ankur, N. Singh, Valorization of bottom ash in concrete: serviceability, microstructural and sustainability characterization, Mag. Concr. Res. (2024). https://doi.org/10.1680/jmacr.23.00313.
34. N. Ankur, N. Singh, An investigation on optimizing the carbonation resistance of coal bottom ash concrete with its carbon footprints and eco-costs, Res. Eng. Struct. Mater. x (2023). https://doi.org/10.17515/resm2023.825ma0719.
35. IS:2386 (Part-1), Method of Test for aggregate for concrete, 1963.
36. IS 2386- Part III, Method of Test for aggregate for concrete. Part III- Specific gravity, density, voids, absorption and bulking, Bur. Indian Stand. New Delhi. (1963) (Reaffirmed 2002).
37. IS:2386:1963, Methods of test for Aggregates for Concrete: Part 4, Mechanical properties, Bur. Indian Stand. New Delhi. (1963) [Reaffirmed 2002].
38. P. Dodds, C. Goodier, C. Christodoulou, S. Austin, D. Dunne, F. Mathew, P. Snowden, Durability performance of structural concrete made with coarse recycled concrete aggregates, in: Beushausen, H. (Ed.). Performance-Based Approaches Concr. Struct. Proc. (Fib Symp. 2016), 2016.
39. IS 516:2014, Method of Tests for Strength of Concrete, IS 516 - 1959 ( Reaffirmed 2004 ). (2004) New Delhi,India.
40. ASTM C1898, Standard Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack, Annu. B. ASTM Stand. ASTM Int. (2020) 9–10. https://doi.org/10.1520/D1898-20.1.
41. RILEM, CPC-18 Measurement of hardened concrete carbonation depth, Mater. Struct. 21 (1988) 453–455. https://doi.org/10.1007/BF02472327.
42. ASTM C1202, Electrical indication of concrete’s ability to resist chloride ion penetration, ASTM Int. C0402 (2000) 21–27.
43. ASTM C1585-13, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes, ASTM Int. 41 (2013) 1–6.
44. IS 516 Part 5 Non-destructive testing of concrete section 1 ultrasonic pulse velocity testing-2018, (n.d.).
45. IS 10262, Concrete Mix Proportioning — Guidelines IS 10262, 2019.
46. M. Quattrone, B. Cazacliu, S.C. Angulo, E. Hamard, A. Cothenet, Measuring the water absorption of recycled aggregates, what is the best practice for concrete production?, Constr. Build. Mater. 123 (2016) 690–703. https://doi.org/10.1016/j.conbuildmat.2016.07.019.
47. J. García-González, D. Rodríguez-Robles, A. Juan-Valdés, J. Morán-del Pozo, M. Guerra-Romero, Pre-Saturation Technique of the Recycled Aggregates: Solution to the Water Absorption Drawback in the Recycled Concrete Manufacture, Materials (Basel). 7 (2014) 6224–6236. https://doi.org/10.3390/ma7096224.
48. Y.-H. Kim, C.-B. Park, B. Il Choi, T.Y. Shin, Y. Jun, J.H. Kim, Quantitative Measurement of Water Absorption of Coarse Lightweight Aggregates in Freshly-Mixed Concrete, Int. J. Concr. Struct. Mater. 14 (2020) 34. https://doi.org/10.1186/s40069-020-00408-x.
49. Indian Standard, IS 516 - 1959 Methods of Tests for Strength of Concrete, 2006.
50. AASHTO T358 19, Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration, n.d.
51. ASTM C1202-19, Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration, 2019. https://doi.org/10.1520/C1202-12.2.
52. N. Ankur, N. Singh, Shear strength characterization and sustainability assessment of coal bottom ash concrete, Can. J. Civ. Eng. (2024). https://doi.org/10.1139/cjce-2023-0307.
53. A. Paul, P. Mathew, Internal Curing Agents in Concrete, Int. Res. J. Eng. Technol. (2020) 3833–3838. www.irjet.net.
54. M.S. Whwah, H.A. Al-Hussainy, A. Dulaimi, L.F.A. Bernardo, T.P. Ribeiro, Investigation of the Effects of Water-to-Cement Ratios on Concrete with Varying Fine Expanded Perlite Aggregate Content, J. Compos. Sci. 9 (2025) 1–24. https://doi.org/10.3390/jcs9080390.
55. M. Afifi, M. Nagib Abou-Zeid, R. Ahmed, Internal Curing of Structural Concrete: A Closer Look, J. Mater. Civ. Eng. 34 (2022). https://doi.org/10.1061/(ASCE)MT.1943-5533.0004055.
56. X. Wang, J. Wang, X. Feng, Z. Yang, J. Gu, W. Deng, Effect of Internal Curing on Early Shrinkage and Crack Resistance of UHPC by SAP and Ceramsite, Materials (Basel). 19 (2026) 1–21. https://doi.org/10.3390/ma19040806.
57. Z. Xia, W. Huang, J. Zhang, X. Li, R. Wang, F. Zhang, B. Yu, Internal curing of high strength concrete based on saturated microporous cenospheres, Case Stud. Constr. Mater. 20 (2024) e03072. https://doi.org/10.1016/j.cscm.2024.e03072.
58. C. Kenneth C., Cement, 2020. https://pubs.usgs.gov/periodicals/mcs2020/mcs2020-cement.pdf.
59. D. Kramar, V. Bindiganavile, Impact response of lightweight mortars containing expanded perlite, Cem. Concr. Compos. 37 (2013) 205–214. https://doi.org/10.1016/j.cemconcomp.2012.10.004.
60. M. Limbachiya, M.S. Meddah, Y. Ouchagour, Use of recycled concrete aggregate in fly-ash concrete, Constr. Build. Mater. 27 (2012) 439–449. https://doi.org/10.1016/j.conbuildmat.2011.07.023.
61. R.K. Majhi, A.N. Nayak, B.B. Mukharjee, Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag, Constr. Build. Mater. 159 (2018) 417–430. https://doi.org/10.1016/j.conbuildmat.2017.10.118.
62. T. Li, R. Nogueira, M.F. Costa Pereira, J. de Brito, J. Liu, Effect of the incorporation ratio of recycled concrete aggregate on the properties of self-compacting mortar, Cem. Concr. Compos. 147 (2024) 105429. https://doi.org/10.1016/j.cemconcomp.2024.105429.
63. F. de Larrard, T. Sedran, Optimization of ultra-high-performance concrete by the use of a packing model, Cem. Concr. Res. 24 (1994) 997–1009. https://doi.org/10.1016/0008-8846(94)90022-1.
64. B. Lothenbach, K. Scrivener, R.D. Hooton, Supplementary cementitious materials, Cem. Concr. Res. 41 (2011) 1244–1256. https://doi.org/10.1016/j.cemconres.2010.12.001.
65. O. Sengul, S. Azizi, F. Karaosmanoglu, M.A. Tasdemir, Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete, Energy Build. 43 (2011) 671–676. https://doi.org/10.1016/j.enbuild.2010.11.008.
66. V. Khonsari, E. Eslami, A. Anvari, Effects of expanded perlite aggregate on the mechanical behavior of lightweight concrete, Fract. Mech. Concr. Concr. Struct. - High Performance, Fiber Reinf. Concr. Spec. Loadings Struct. Appl. B. H. Oh, Al. (2010) 1354–1361.
67. İ. Türkmen, A. Kantarcı, Effects of expanded perlite aggregate and different curing conditions on the physical and mechanical properties of self-compacting concrete, Build. Environ. 42 (2007) 2378–2383. https://doi.org/10.1016/j.buildenv.2006.06.002.
68. A.S. Gandage, V.R.V. Rao, M.V.N. Sivakumar, A. Vasan, M. Venu, A.B. Yaswanth, Effect of Perlite on Thermal Conductivity of Self Compacting Concrete, Procedia - Soc. Behav. Sci. 104 (2013) 188–197. https://doi.org/10.1016/j.sbspro.2013.11.111.
69. M.B. Karakoç, R. Demirboga, HSC with Expanded Perlite Aggregate at Wet and Dry Curing Conditions, J. Mater. Civ. Eng. 22 (2010) 1252–1259. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000134.
70. B. Israngkura Na Ayudhya, Compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing perlite aggregate and polypropylene fiber subjected to high temperatures, Songklanakarin J. Sci. Technol. 33 (2011) 555–563.
71. A.A. Ramezanianpour, S.M. Motahari Karein, P. Vosoughi, A. Pilvar, S. Isapour, F. Moodi, Effects of calcined perlite powder as a SCM on the strength and permeability of concrete, Constr. Build. Mater. 66 (2014) 222–228. https://doi.org/10.1016/j.conbuildmat.2014.05.086.