A Hybrid Blockchain-BIM Platform for Construction Project Design-Phase Quality Assurance

Öz

For the construction projects design-phase Building Information Modelling (BIM) workflows are still coordinated through siloed approvals and weakly enforced quality checks. The ultimate aim of this study is to propose a hybrid blockchain-backed BIM platform that provides representational conversion for submission, validation, approval and revision as smart-contract-controlled state transitions on a permissioned ledger, recurrently settled on the public blockchain for finality. For this purpose, a simulation-based comparison is done for the platform with a centralized workflow across three load levels. Simulation results revealed that, the hybrid configuration achieved lower and more stable latency (median 1.5-2.8 s versus a markedly wider, load-sensitive baseline distribution), higher throughput, higher transaction integrity, more complete audit traces and closer alignment between validation results/outputs and approval decisions, with the largest gap observed for final approval (φ = 0.32). These results show that ledger-based state transitions can improve efficiency, quality-gate enforcement and record reliability and authenticity in the design phase of the construction projects.

Anahtar Kelimeler

• Blockchain
• Building Information Modelling (BIM)
• smart contracts
• construction quality control
• blockchain-BIM integration
• automated quality assurance
• design-phase workflow administration

Kaynakça

1. N. O. Nawari and S. Ravindran, "Blockchain technology and BIM process: Review and potential applications," J. Inf. Technol. Constr., vol. 24, 2019.
2. R. Sood, N. Sharma, B. Laishram, Y. G. Sandanayake, K. G. A. S. Waidyasekara, K. A. T. O. Ranadewa, and H. Chandanie, "BIM and blockchain integrated construction management: a review," in Proc. 12th World Construction Symp., 2024, p. 292.
3. A. A. Hijazi, A. Alashwal, M. B. Shishehgarkhaneh, and R. N. Calheiros, "Blockchain-BIM Integration in Construction: A Systematic Literature Review of Workflows, Mechanisms, and Platforms," J. Build. Eng., 2026, Art. no. 115388.
4. V. Plevris, N. D. Lagaros, and A. Zeytinci, "Blockchain in Civil Engineering, Architecture and Construction Industry: State of the Art, Evolution, Challenges and Opportunities," Front. Built Environ., vol. 8, 2022, Art. no. 840303, doi: 10.3389/fbuil.2022.840303.
5. C. M. Eastman, P. Teicholz, R. Sacks, and K. Liston, BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, 2nd ed. Hoboken, NJ, USA: Wiley, 2011.
6. Y. Celik, "A novel framework for integrating blockchain and building information modelling in construction projects," Ph.D. dissertation, Cardiff Univ., Cardiff, U.K., 2024.
7. B. G. Celik, Y. S. Abraham, and M. Attaran, "Unlocking Blockchain in Construction: A Systematic Review of Applications and Barriers," Buildings, vol. 14, no. 6, p. 1600, 2024, doi: 10.3390/buildings14061600.
8. M. A. Kamel, E. S. Bakhoum, and M. M. Marzouk, "A framework for smart construction contracts using BIM and blockchain," Sci. Rep., vol. 13, no. 1, p. 10217, 2023.

9. M. A. Berawi, T. Y. Zagloel, M. N. Ariq, and M. Sari, "A Blockchain-based BIM model for the smart building planning process," in Proc. 3rd Int. Sci. Conf. Innovations in Digital Economy, 2021, pp. 253-261.
10. L. Wang, K. Hu, H. Wang, X. Yan, J. Ren, L. Lu, X. Liu, and L. Guan, "Procurement and Supply Chain Enhancement by Application of Building Information Modelling in the Construction Industry," Turkish J. Civ. Eng., Advanced Online Publication, 2026, doi: 10.18400/tjce.1886007.
11. R. Brandín and S. Abrishami, "IoT-BIM and blockchain integration for enhanced data traceability in offsite manufacturing," Autom. Constr., vol. 159, 2024, Art. no. 105266.
12. H. Luo, M. Das, J. Wang, and J. C. Cheng, "Construction payment automation through smart contract-based blockchain framework," in Proc. ISARC, vol. 36, 2019, pp. 1254-1260.
13. C. Sydora and E. Stroulia, "Rule-based compliance checking and generative design for building interiors using BIM," Autom. Constr., vol. 120, 2020, Art. no. 103368.
14. R. Zheng, J. Jiang, X. Hao, W. Ren, F. Xiong, and Y. Ren, "bcBIM: A blockchain-based big data model for BIM modification audit and provenance in mobile cloud," Math. Probl. Eng., vol. 2019, 2019, Art. no. 5349538, doi: 10.1155/2019/5349538.
15. M. Kuperberg and M. Geipel, "Blockchain and BIM (building information modeling): progress in academia and industry," arXiv:2104.00547, 2021.
16. T. Dounas, D. Lombardi, and W. Jabi, "Framework for decentralised architectural design BIM and Blockchain integration," Int. J. Archit. Comput., vol. 19, no. 2, pp. 157-173, 2021.
17. S. Matarneh, F. Elghaish, F. P. Rahimian, and N. Dawood, "Automated construction payment using blockchain-enabled smart contracts and building information modelling," in Proc. 29th Int. Workshop Intell. Comput. Eng. (EG-ICE), 2022, pp. 494-458.
18. F. Javed and J. Mangues-Bafalluy, "An empirical smart contracts latency analysis on ethereum blockchain for trustworthy inter-provider agreements," arXiv:2503.01397, 2025.
19. X. Tao, M. Das, Y. Liu, P. W. K. Yiu, K. Chen, and J. C. Cheng, "A conceptual framework for secure BIM-based design: using blockchain and asymmetric encryption," in Proc. ISARC, vol. 38, 2021, pp. 81-87.
20. M. Das, X. Tao, and J. C. P. Cheng, "BIM security: A critical review and recommendations using encryption strategy and blockchain," Autom. Constr., vol. 126, 2021, Art. no. 103682, doi: 10.1016/j.autcon.2021.103682.
21. R. Lal, A. O. Daoud, A. G. Mohamed, and M. Nabawy, "Blockchain for Safety Compliance in Construction: A Comprehensive Literature Review," Buildings, vol. 16, no. 1, p. 143, 2026, doi: 10.3390/buildings16010143.
22. C. K. Lee, C. Chai, M. Bujna, M. A. Fauzi, and Y. Q. Boo, "Understanding the causes of design errors in construction projects: A DEMATEL-based framework," J. Leg. Aff. Dispute Resolut. Eng. Constr., vol. 16, no. 2, 2024, Art. no. 04524002.
23. L. Lung, "Using BIM to simulate the energy consumption and reduce its cost," Int. J. Innov. Manag. Technol., vol. 10, no. 1, pp. 21-26, 2019.
24. T. Minato, "Design documents quality in the Japanese construction industry: factors influencing and impacts on construction process," Int. J. Proj. Manag., vol. 21, no. 7, pp. 537-546, 2003.
25. A. O. Akponeware and Z. A. Adamu, "Clash detection or clash avoidance? An investigation into coordination problems in 3D BIM," Buildings, vol. 7, no. 3, p. 75, 2017.
26. O. A. Krasovskaya, V. E. Vyaznikov, and A. I. Mamaeva, "Application of BIM technologies as it projects for digital transformation in industry," in Proc. Int. Sci. Pract. Conf. Digital Inf. Technol. Econ. Manag., Cham, Switzerland: Springer, 2021, pp. 104-116.
27. H. Aladağ, G. Demirdöğen, A. T. Demirbağ, and Z. Işık, "Structural Equation Model for BIM Adoption in the Turkish Construction Industry," Turkish J. Civ. Eng., vol. 37, no. 2, pp. 77-103, 2026, doi: 10.18400/tjce.1641335.
28. A. Budak and İ. Karataş, "Impact of the BIM system in construction management services in developing countries; Case of Turkey," Pamukkale Univ. J. Eng. Sci., vol. 28, no. 6, pp. 828-839, 2022, doi: 10.5505/pajes.2022.64369.
29. G. Ozcan-Deniz, B. Ozorhon, and O. C. Kaya, "Building Information Modeling (BIM) integration in developing countries: An in-depth examination of adoption factors from public clients' perspectives," Int. J. Archit. Comput., vol. 23, no. 2, pp. 481-497, 2025, doi: 10.1177/14780771241270196.
30. Istanbul Metropolitan Municipality (İBB), Directorate of City Planning, "BIMIST: Digitalization of Building Permit Processes," 2021. [Online]. Available: https://imarmudurlugu.ibb.istanbul/hizmetkategori/bim-ar-ge-calismalari (accessed Aug. 2026).
31. G. Bozkurt, S. Ersoy, and E. Yaşa, "Evaluation of Integration of BIM and Virtual Reality Applications in Building Production Processes," Turkish J. Civ. Eng., vol. 35, no. 4, pp. 117-144, 2024, doi: 10.18400/tjce.1244122.
32. E. Halmetoja and N. Lepkova, "Utilising building information models in facility maintenance and operations," Teknik Dergi, vol. 33, no. 5, pp. 12337-12351, 2022, doi: 10.18400/tekderg.748397.
33. I. Lozinski, "A few words about rule-based model checking," BIM Corner, 2022. [Online]. Available: https://bimcorner.com/a-few-words-about-rule-based-model-checking/ (accessed Apr. 2026).
34. A. Patel, "The Role of BIM Coordination in Delivering Clash-Free Models," 2026. [Online]. Available: https://www.smartcadd.com/role-of-bim-coordination-in-delivering-clash-free-models/ (accessed Apr. 2026).
35. R. Yasaweerasinghelage, M. Staples, and I. Weber, "Using architectural modelling and simulation to predict latency of blockchain-based systems," School Comput. Sci. Eng., UNSW Australia, Tech. Rep. 201704, 2017.
36. Republic of Türkiye Official Gazette, "Regulation Amending the Zoning Regulation for Planned Areas," 2025. [Online]. Available: https://www.resmigazete.gov.tr/eskiler/2025/03/20250311-1.htm (accessed Aug. 2026).
37. Republic of Türkiye, Law No. 4708 on Building Inspection (Yapı Denetimi Hakkında Kanun), Official Gazette No. 24461, 13 July 2001.
38. Republic of Türkiye, Law No. 4734 on Public Procurement (Kamu İhale Kanunu), Official Gazette No. 24648, 22 January 2002.
39. Republic of Türkiye, Law No. 5070 on Electronic Signatures (Elektronik İmza Kanunu), Official Gazette No. 25355, 23 January 2004.
40. European Parliament and Council of the European Union, Regulation (EU) No 910/2014 of 23 July 2014 on Electronic Identification and Trust Services for Electronic Transactions in the Internal Market (eIDAS), as amended by Regulation (EU) 2024/1183, 2014/2024.
41. Supreme People's Court of the People's Republic of China, Provisions on Several Issues Concerning the Trial of Cases by Internet Courts, Fa Shi [2018] No. 16, effective 7 September 2018, Art. 11.
42. Republic of Türkiye, Code of Civil Procedure (Hukuk Muhakemeleri Kanunu), Law No. 6100, Official Gazette No. 27836, 4 February 2011, Arts. 199-200.
43. X. Tao, M. Das, Y. Liu, and J. C. P. Cheng, "Distributed common data environment using blockchain and Interplanetary File System for secure BIM-based collaborative design," Autom. Constr., vol. 130, 2021, Art. no. 103851, doi: 10.1016/j.autcon.2021.103851.