Ultrasonic Characterization of Polymer Based Sille Stone Powder Composite Mortars

Yıl 2024, Cilt: 35 Sayı: 3, 21 - 46, 01.05.2024

Ahmet Cihat Arı , Mustafa Tosun , İmran Oral , Yasin Ramazan Eker

https://doi.org/10.18400/tjce.1297882

Cited By: 2

Öz

The Sille stone mined in the Sille Region of Konya province in Türkiye, is an andesitic rock. This stone is a material used in the construction of traditional and modern buildings. The Sille stone is cut while being used in buildings. The Sille stone powder (SSP) is formed during this cutting process. The SSPs cause environmental pollution. Therefore, this study was carried out to produce durable and eco-friendly new restoration mortars from the SSP that can be used in the restoration of historical buildings. The SSP composites were prepared by contributing SSP into epoxy and polyester resins in varied ratios such as 60‒75 wt.%. The effect of resin types and SSP contribution ratios on the elastic properties of epoxy resin (ER)/SSP and polyester resin (PR)/SSP composites was investigated by the ultrasonic pulse-echo method. Additionally, the morphology of these composites was investigated by scanning electron microscopy (SEM). Experimental results figured out that both longitudinal and shear wave velocity values of the PR/SSP composites were higher than of the ER/SSP composites. Furthermore, a linear increase was observed in the elastic properties of obtained composites with the increasing amounts of SSP.

Anahtar Kelimeler

Polymer materials, Sille stone powder, ultrasonic, nondestructive testing, restoration

Destekleyen Kurum

Konya Technical University

Proje Numarası

211120045

Teşekkür

This study was prepared by utilizing the doctoral thesis titled ‘‘Production and Characterization of Natural Stone Powder and Polymer Binding Mortars for the Repair of Historic Buildings; Sille Stone Example” made by Ahmet Cihat ARI under the supervision of Mustafa TOSUN and completed in March 2023. This study was supported by Konya Technical University Scientific Research Projects Commission within the scope of PhD (project number 211120045). The authors are grateful for the support provided by Konya Technical University (Turkey). Analyzes in the study were carried out in the laboratory of Necmettin Erbakan University, Science and Technology Research and Application Center (BİTAM). We would like to thank the staff of BİTAM for their assistance.

Kaynakça

• Saheb D. N., Jog J. P., Natural Fiber Polymer Composites: A Review, Advances in Polymer Technology, 18(4), 351-363, 1999.
• Humphreys M. F., The Use of Polymer Composites in Construction, International Conference on Smart and Sustainable Built Environment, Australia, 2003.
• Pendhari S. S., Kant T., Desai Y. M., Application of Polymer Composites in Civil Construction: A General Review, Composite Structures, 84(2), 114-124, 2008.
• Jain A., Polymer Concrete: Future of Construction Industry, International Journal of Scientific Research, 2(11), 201-202, 2012.
• Van Gemert D., Czarnecki L., Maultzsch M., Schorn H., Beeldens A., Łukowski P., Knapen E., Cement Concrete and Concrete–Polymer Composites: Two Merging Worlds: A Report from 11th ICPIC Congress in Berlin, 2004, Cement and Concrete Composites, 27(9-10), 926-933, 2005.
• Pascal S., Alliche A., Pilvin P., Mechanical Behaviour of Polymer Modified Mortars, Materials Science and Engineering: A, 380(1-2), 1-8, 2004.
• Hwang E.-H., Ko Y. S., Comparison of Mechanical and Physical Properties of SBR-Polymer Modified Mortars Using Recycled Waste Materials, Journal of Industrial and Engineering Chemistry, 14(5), 644-650, 2008.
• Buyuksagis I. S., Uygunoglu T., Tatar E., Investigation on The Usage of Waste Marble Powder in Cement-Based Adhesive Mortar, Construction and Building Materials, 154, 734-742, 2017.
• Marvila M. T., Alexandre J., de Azevedo A. R. G., Zanelato E. B., Evaluation of The Use of Marble Waste in Hydrated Lime Cement Mortar Based, Journal of Material Cycles and Waste Management, 21, 1250-1261, 2019.
• Vardhan K., Siddique R., Goyal S., Strength, Permeation and Micro-Structural Characteristics of Concrete Incorporating Waste Marble, Construction and Building Materials, 203, 45-55, 2019.
• Srivastava A., Singh S. K., Utilization of Alternative Sand for Preparation of Sustainable Mortar: A Review, Journal of Cleaner Production, 253, 119706, 2020.
• Eren Y., Stratigraphy of Autochthonous and Cover Units of the Bozdağlar Massif NW Konya, Geological Bulletin of Turkey, 36, 7-23, 1993.
• Aksoy R., Demiröz A., The Konya Earthquakes of 10–11 September 2009 and Soil Conditions in Konya, Central Anatolia, Turkey, Natural Hazards and Earth System Sciences, 12, 295-303, 2012.
• Aksoy R., Extensional Neotectonic Regime in West-Southwest Konya, Central Anatolia, Turkey, International Geology Review, 61(14), 1803-1821, 2019.
• Sprenger S., Epoxy Resin Composites with Surface‐Modified Silicon Dioxide Nanoparticles: A Review, Journal of Applied Polymer Science, 130(3), 1421-1428, 2013.
• Doan T. T. L., Brodowsky H. M., Gohs U., Mäder E., Re‐use of Marble Stone Powders in Producing Unsaturated Polyester Composites, Advanced Engineering Materials, 20, 1701061, 2018.
• Ramadan N., Taha M., La Rosa A. D., Elsabbagh A., Towards Selection Charts for Epoxy Resin, Unsaturated Polyester Resin and Their Fibre-Fabric Composites with Flame Retardants, Materials, 14(5), 1181, 2021.
• Ying G.-G., Song C., Ren J., Guo S.-Y., Nie R., Zhang L., Mechanical and Durability-Related Performance of Graphene/Epoxy Resin and Epoxy Resin Enhanced OPC Mortar, Construction and Building Materials, 282, 122644, 2021.
• Debska B., Lichołai L., Miąsik P., Assessment of the Applicability of Sustainable Epoxy Composites Containing Waste Rubber Aggregates in Buildings, Buildings, 9(2), 31, 2019.
• Abenojar J., Martínez M. A., de Armentia S. L., Paz E., del Real J. C., Velasco F., Mechanical Properties and Fire-Resistance of Composites with Marble Particles, Journal of Materials Research and Technology, 12, 1403-1417, 2021.
• Barros M. M., de Oliveira M. F. L., da Conceição Ribeiro R. C., Bastos D. C., de Oliveira M. G., Ecological Bricks from Dimension Stone Waste and Polyester Resin, Construction and Building Materials, 232, 117252, 2020.
• Lee C. H., Jo Y. H., Correlation and Correction Factor Between Direct and Indirect Methods for the Ultrasonic Measurement of Stone Samples, Environmental Earth Sciences, 76, 477, 2017.
• Ahmad A., Pamplona M., Simon S., Ultrasonic Testing for The Investigation and Characterization of Stone–A Non-Destructive and Transportable Tool, Studies in Conservation, 54, 43-53, 2009.
• Favaro M., Mendichi R., Ossola F., Russo U., Simon S., Tomasin P., Vigato P. A., Evaluation of Polymers for Conservation Treatments of Outdoor Exposed Stone Monuments. Part I: Photo-Oxidative Weathering, Polymer Degradation and Stability, 91(12), 3083-3096, 2006.
• Alameri I., Oltulu M., Mechanical Properties of Polymer Composites Reinforced by Silica-Based Materials of Various Sizes, Applied Nanoscience, 10, 4087-4102, 2020.
• Ghassemi P., Toufigh V., Durability of Epoxy Polymer and Ordinary Cement Concrete in Aggressive Environments, Construction and Building Materials, 234, 117887, 2020.
• Jafari K., Toufigh V., Experimental and Analytical Evaluation of Rubberized Polymer Concrete, Construction and Building Materials, 155, 495-510, 2017.
• Kılıç A., Teymen A., Determination of Mechanical Properties of Rocks Using Simple Methods, Bulletin of Engineering Geology and the Environment, 67, 237-244, 2008.
• Ye G., Lura P., Van Breugel K., Fraaij A. L. A., Study on The Development of The Microstructure in Cement-Based Materials by Means of Numerical Simulation and Ultrasonic Pulse Velocity Measurement, Cement and Concrete Composites, 26(5), 491-497, 2004.
• Mesquita E., Martini R., Alves A., Antunes P., Varum H., Non-Destructive Characterization of Ancient Clay Brick Walls by Indirect Ultrasonic Measurements, Journal of Building Engineering, 19, 172-180, 2018.
• de Araújo Freitas V. L., de Albuquerque V. H. C., de Macedo Silva E., Silva A. A., Tavares J. M. R., Nondestructive Characterization of Microstructures and Determination of Elastic Properties in Plain Carbon Steel Using Ultrasonic Measurements, Materials Science and Engineering: A, 527(16-17), 4431-4437, 2010.
• Adamus K., Janina A., Lacki J., Ultrasonic Testing of Thin Walled Components Made of Aluminum Based Laminates, Composite Structures, 202, 95-101, 2018.
• Sun H., Zhu J., Nondestructive Evaluation of Steel-Concrete Composite Structure Using High-Frequency Ultrasonic Guided Wave, Ultrasonics, 103, 106096, 2020.
• Xu S., Wang J., Jiang Q., Zhang S., Study of Natural Hydraulic Lime-Based Mortars Prepared with Masonry Waste Powder as Aggregate and Diatomite/Fly Ash as Mineral Admixtures, Journal of Cleaner Production, 119, 118-127, 2016.
• Branco F. G., Belgas M. d. L., Mendes C., Pereira L., Ortega J. M., Mechanical Performance of Lime Mortar Coatings for Rehabilitation of Masonry Elements in Old and Historical Buildings, Sustainability, 13(6), 3281, 2021.
• Autiero F., Ramesh M., Azenha M., Di Ludovico M., Prota A., Lourenço P. B., Experimental Analysis of Lime Putty and Pozzolan-Based Mortar for Interventions in Archaeological Sites, Materials and Structures, 54, 148, 2021.
• Grazzini A., Zerbinatti M., Fasana S., Mechanical Characterization of Mortars Used in the Restoration of Historical Buildings: an Operative Atlas for Maintenance and Conservation, IOP Conference Series: Materials Science and Engineering, 629, 012024, 2019.
• Ramesh M., Azenha M., Lourenço P. B., Quantification of Impact of Lime on Mechanical Behaviour of Lime Cement Blended Mortars for Bedding Joints in Masonry Systems, Construction and Building Materials, 229, 116884, 2019.
• Aliabdo A. A. E., Elmoaty A. E. M. A., Reliability of Using Nondestructive Tests to Estimate Compressive Strength of Building Stones and Bricks, Alexandria Engineering Journal, 51(3), 193-203, 2012.
• Ozdemir A., Capillary Water Absorption Potential of Some Building Materials, Geological Engineering, 26(1), 19-32, 2002.
• Kekec B., Unal M., Investigation of The Texture, Physical and Mechanical Properties of Some Rocks Used as Building Stone, 7-Th International Multidisciplinary Scientific Geoconference SGEM, 2007.
• Saydan M., Unal A., Keskin U. S., Kansun G., An Investigation of the Current Situation of the Mısırlıoğlu Bridge and Possible Damages After Freeze-Thaw by Using Finite Elements Analysis, Sille–Konya (Central Anatolia, Turkey), Engineering Failure Analysis, 117, 104788, 2020.
• Zedef V., Kocak K., Doyen A., Ozsen H., Kekec B., Effect of Salt Crystallization on Stones of Historical Buildings and Monuments, Konya, Central Turkey, Building and Environment, 42(3), 1453-1457, 2007.
• Fener M., İnce İ., Effects of the Freeze–Thaw (F–T) Cycle on the Andesitic Rocks (Sille-Konya/Turkey) Used in Construction Building, Journal of African Earth Sciences, 109, 96-106, 2015.
• Korkanç M., Hüseyinca M. Y., Hatır M. E., Tosunlar M. B., Bozdağ A., Özen L., İnce İ., Interpreting Sulfated Crusts on Natural Building Stones Using Sulfur Contour Maps and Infrared Thermography, Environmental Earth Sciences, 78, 378, 2019.
• Öztürk Ç., Akpınar S., Tarhan M., Investigation of the Usability of Sille Stone as Additive in Floor Tiles, Journal of the Australian Ceramic Society, 57, 567-577, 2021.
• Öztürk Ç., Physicochemical Properties of Heat Treated Sille Stone for Ceramic Industry, Open Chemistry, 16(1), 1134-1142, 2018.
• Güyer F., Günaydın A. B., Akbulut İ., Ak S., Kurtman T., Demirci A. R., Akarsu B., Emre Ö., Durdu M., Karakaş M., Üyüklü A., Yıldız H., Konya İli Çevre Jeolojisi ve Doğal Kaynaklar, No: 42149, MTA Rap., Ankara, 1998.
• Url1, https://www.kompozitpazari.com/ (Accessed 13.09.2023), 2023.
• Url2, https://brtr-kimya-as.business.site/ (Accessed 13.09.2023), 2023.
• Standard A., ASTM D638-14. Standard Test Method for Tensile Properties of Plastics, ASTM International: West Conshohocken, PA, 2014.
• Dong J., Kim B., Locquet A., McKeon P., Declercq N., Citrin D. S., Nondestructive Evaluation of Forced Delamination in Glass Fiber-Reinforced Composites by Terahertz and Ultrasonic Waves, Composites Part B: Engineering, 79, 667-675, 2015.
• Hellier C. J., Handbook of Nondestructive Evaluation, Blacklick, OH, 2nd ed. McGraw-Hill Education, 2013.
• Nanekar P. P., Shah B. K., Characterization of Material Properties by Ultrasonics, BARC Newsletter, 249, 25-38, 2003.
• Perepechko I. I., Acoustic Methods of Investigating Polymers (Translated from Russian by G. Leib), Moscow, Mir Publishers, 1975.
• Shah A. A., Ribakov Y., Zhang C., Efficiency and Sensitivity of Linear and Non-Linear Ultrasonics to Identifying Micro and Macro-Scale Defects in Concrete, Materials & Design, 50, 905-916, 2013.
• Fang Y., Lin L., Feng H., Lu Z., Emms G. W., Review of The Use of Air-Coupled Ultrasonic Technologies for Nondestructive Testing of Wood and Wood Products, Computers and Electronics in Agriculture, 137, 79-87, 2017.
• Vasconcelos G., Lourenço P. B., Alves C. A. S., Pamplona J., Ultrasonic Evaluation of The Physical and Mechanical Properties of Granites, Ultrasonics, 48(5), 453-466, 2008.
• Noor-E-Khuda S., Albermani F., Mechanical Properties of Clay Masonry Units: Destructive and Ultrasonic Testing, Construction and Building Materials, 219, 111-120, 2019.
• Lafhaj Z., Goueygou M., Djerbi A., Kaczmarek M., Correlation Between Porosity, Permeability and Ultrasonic Parameters of Mortar with Variable Water/Cement Ratio and Water Content, Cement and Concrete Research, 36(4), 625-633, 2006.
• Trtnik G., Kavčič F., Turk G., Prediction of Concrete Strength Using Ultrasonic Pulse Velocity and Artificial Neural Networks, Ultrasonics, 49(1), 53-60, 2009.
• Hirsekorn S., Van Andel P. W., Netzelmann U., Ultrasonic Methods to Detect and Evaluate Damage in Steel, Nondestructive Testing and Evaluation, 15(6), 373-393, 1998.
• Aggelakopoulou E., Bakolas A., Moropoulou A., Properties of Lime–Metakolin Mortars for the Restoration of Historic Masonries, Applied Clay Science, 53(1), 15-19, 2011.
• Garbacz A., Garboczi E. J., Ultrasonic Evaluation Methods Applicable to Polymer Concrete Composites, US Department of Commerce, Technology Administration, National Institute of Standards and Technology, 2003.
• Oral I., Determination of Elastic Constants of Epoxy Resin/Biochar Composites by Ultrasonic Pulse Echo Overlap Method, Polymer Composites, 37(9), 2907-2915, 2016.
• Bulut Ü., Tanaçan L., Perlitin Puzolanik Aktivitesi (Pozzolanic Activity of Perlite) İtüdergisi/a Mimarlık, Planlama, Tasarım, 8(1), 81-89, 2009.
• Topçu İ. B., Gökbel S., Işıkdağ B., Genleştirilmiş Perlitin Horasan Harçlarında Kullanılması (Using Expanded Perlite in Khorasan Mortars), 2nd International Sustainable Building Sympodium, Ankara, Turkey, 133-137, 2015.
• Gupta L. K., Vyas A. K., Impact on Mechanical Properties of Cement Sand Mortar Containing Waste Granite Powder, Construction and Building Materials, 191, 155-164, 2018.
• Wu F., Liu C., Sun W., Zhang L., Mechanical Properties of Bio-Based Concrete Containing Blended Peach Shell and Apricot Shell Waste, Materiali in Tehnologije, 52(5), 645-651, 2018.
• Eren F., Keskinateş M., Felekoğlu B., Tosun Felekoğlu K., Mineral Katkı İkamesinin Kalsiyum Alümina Çimentolu Harçların Taze Hal ve Zamana Bağlı Sertleşmiş Hal Özelliklerine Etkileri, Turkish Journal of Civil Engineering, 34(3), 139-162, 2023.
• Haach V. G., Vasconcelos G., Lourenço P. B., Influence of Aggregates Grading and Water/Cement Ratio in Workability and Hardened Properties of Mortars, Construction and Building Materials, 25(6), 2980-2987, 2011.
• Iucolano F., Liguori B., Colella C., Fibre-Reinforced Lime-Based Mortars: A Possible Resource for Ancient Masonry Restoration, Construction and Building Materials, 38, 785-789, 2013.
• Oğuz C., Türker F., Koçkal N. U., Andriake Limanı’nda Roma, Bizans ve Selçuklu Dönemi Harçların Özellikleri, İMO Teknik Dergi, 429, 6993-7013, 2015.
• Papatzani S., Paine K., Nanomontmorillonite Reinforced Fibre Cements and Nanomontmorillonite-Nanosilica Reinforced Mortars, Turkish Journal of Civil Engineering, 34(3), 43-60, 2023.
• Sahu R., Gupta M. K., Chaturvedi R., Tripaliya S. S., Pappu A., Moisture Resistant Stones Waste Based Polymer Composites with Enhanced Dielectric Constant and Flexural Strength, Composites Part B: Engineering, 182, 107656, 2020.
• Awad A. H., El-Gamasy R., Abd El-Wahab A. A., Abdellatif M. H., Assessment of Mechanical Properties of HDPE Composite with Addition of Marble and Granite Dust, Ain Shams Engineering Journal, 11(4), 1211-1217, 2020.
• Awad A. H., El-gamasy R., Abd El-Wahab A. A., Abdellatif M. H., Mechanical Behavior of PP Reinforced with Marble Dust, Construction and Building Materials, 228, 116766, 2019.
• Kabeer K. I. S. A., Vyas A. K., Utilization of Marble Powder as Fine Aggregate in Mortar Mixes, Construction and Building Materials, 165, 321-332, 2018.
• Reddy B. V. V., Gupta A., Influence of Sand Grading on the Characteristics of Mortars and Soil–Cement Block Masonry, Construction and Building Materials, 22(8), 1614-1623, 2008.
• Afifi H., Hasan E., Annealing Effect on Microhardness and Elastic Constants of PMMA, Polymer-Plastics Technology and Engineering, 42(4), 543-554, 2003.
• Afifi H. A., Ultrasonic Pulse Echo Studies of the Physical Properties of PMMA, PS, and PVC, Polymer-Plastics Technology and Engineering, 42(2), 193-205, 2003.
• Ali M. G. S., Elsayed N. Z., Eid A. M., Ultrasonic Attenuation and Velocity in Steel Standard Reference Blocks, Romanian Journal of Acoustics and Vibration, 10(1), 33-38, 2013.
• Hirose S., Hatakeyama T., Hatakeyama H., Glass Transition and Thermal Decomposition of Epoxy Resins from the Carboxylic Acid System Consisting of Ester-Carboxylic Acid Derivatives of Alcoholysis Lignin and Ethylene Glycol with Various Dicarboxylic Acids, Thermochimica Acta, 431(1-2), 76-80, 2005.
• Kocaman S., Soydal U., Ahmetli G., Influence of Cotton Waste and Flame-Retardant Additives on the Mechanical, Thermal, and Flammability Properties of Phenolic Novolac Epoxy Composites, Cellulose, 28, 7765-7780, 2021.
• Zakriya M., Ramakrishnan G., Gobi N., Palaniswamy N. K., Srinivasan J., Jute-Reinforced Non-Woven Composites as a Thermal Insulator and Sound Absorber–A Review, Journal of Reinforced Plastics and Composites, 36, 206-213, 2017.
• Amin V. R., Ultrasonic Attenuation Estimation for Tissue Characterization, Retrospective Theses and Dissertations, Ames, Iowa State University, 1989.
• Oral I., Guzel H., Ahmetli G., Gur C. H., Determining The Elastic Properties of Modified Polystyrenes by Sound Velocity Measurements, Journal of Applied Polymer Science, 121(6), 3425-3432, 2011.
• Url3, https://kvmgm.ktb.gov.tr/Eklenti/116937,kultur-ve-turizm-bakanligi-2023-2-birim-fiyatlaripdf.pdf?0 (Accessed 13.09.2023), 2023.