A New Laminate Composite System: Metallic-Intermetallic Laminate Material

Yıl 2013, Cilt: 3 Sayı: 4, 18 - 25, 23.07.2016

Tuba Yener Zeynep Öztekin İbrahim Altınsoy Gözde F.Çelebi Efe Sakin Zeytin

Öz

Metallic-intermetallic laminate (MIL) composites consisting of alternating layers of Ta, Al and the intermetallic Al3Ta have been fabricated by reactive foil sintering in open atmospheric furnace. In this study, tantalum and aluminum foils with initial thicknesses of 250 µm were used. Sintering process has carried at 850-900 and 950 ºC for 5 and 7.5 hours under 2 MPa pressure. The aluminium foil was consumed by forming a tantalum aluminide intermetallic compound. Thus, the final microstructure consists of alternating layers of intermetallic compound and unreacted Ta metal. Microstructural characterizations of produced composites have conducted by using scaning electron microscope. Hardness values of test samples have also measured by vickers indentation method

Anahtar Kelimeler

Intermetallic, tantalum aluminide, laminate composite, sintering

Kaynakça

• Bataev, I.A. Bataev, A.A. Mali, V.I, Pavliukova, D.V., (2012) Structural and mechanical properties of metallic–intermetallic laminate composites produced by explosive welding and annealing (pp: 225–234), Materials and Design
• İpek, M, Üstel, F., Zeytin S, (2008), Fracture Behaviour of Ti-Al3Ti Metallic-Intermetallic Laminate (MIL) Composites, (p.1262-1268), Pamukkale University, Denizli.
• Oktay, S,Yıldırım, H, Yener, T., İpek, M., Zeytin S., Bindal, C. (2010), Intermetallics Formation in Nickel Aluminum Laminate System, (pp:1043-1050), Pamukkale University, Denizli
• Peng, L.M. Wang, J.H., Li, H., Zhao, J.H., He,L.H, (2004) Synthesis and microstructural characterization of Ti–Al3Ti metal –intermetallic laminate (MIL) composites, (pp:243–248) Scripta Materialia
• Peng, L.M., Li, H. Wang, J.H., (2005) Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti –Al3Ti) composites, (pp:309–318), Materials Science and Engineering
• Price, R.D., Jiang, F., Kulin, R.M., Vecchio, K.S., (2011), Effects of ductile phase volume fraction on the mechanical properties of Ti–Al3Ti metal-intermetallic laminate (MIL) composites, (pp:3134-3146), Materials Science and Engineering
• Rohatgi, A., Harach, D.J., Vecchio, K.S., Harvey, K.P., (2003) Resistance-curve and fracture behavior of Ti–Al3Ti metallic –intermetallic laminate (MIL) composites, (pp:2933–2957), Acta Materialia
• Tiezheng Li, F. Grignon, D.J. Benson, K.S. Vecchio, E.A. Olevsky, Fengchun Jiang, A. Rohatgi, R.B. Schwarz, M.A. Meyers, (2004), Modeling the elastic properties and damage evolution in Ti–Al3Ti metal intermetallic laminate (MIL) composites, (pp:10–26), Materials Science and Engineering
• Yeh, C.L., Wang, H.J., (2010) Formation of Ta–Al intermetallics by combustion synthesis involving Al-based thermite reactions, (pp:153–158), Journal of Alloys and Compounds
• Zeytin S ., Üstel, F., İpek, M., Kazdal, Zeytin, H., (2008), Production of Ti–Al3Ti metal intermetallic laminate (MIL) composites, Project Number:104M184, Tubitak Project
• http://en.wikipedia.org/2012