Failure Analysis of Fire Extinguishers: Experimental and Numerical Investigation
Öz
1.Giriş
This study investigates failure mechanisms in deep-drawn portable fire extinguishers using hydrostatic tests and finite element analysis (FEA).
2.Materyal&Metod
Production stages were systematically examined, with deep drawing-induced mechanical properties and nonlinear bilinear isotropic hardening incorporated into the numerical model.
3.Sonuçlar
While extinguishers meeting ASTM, TSE EN 13018, and TSE EN 3-8 standards passed successfully with sufficient weld penetration, those outside standard ranges failed.
4.Tartışma
The FEA model, accounting for material thinning and hardening, showed high correlation with experimental failure pressures and locations. Results indicate that material hardening, thinning, and welding effects especially in the bush region are the critical parameters governing catastrophic failure in these vessels.
Kaynakça
Anahtar Kelimeler
Kaynakça
- Agag Jr. G. M. (2024). Weld-joint design to optimize groove weld depth and mechanical properties for the welding of the nozzle onto the pressure vessel. Welding International, 38(8), 511–530.
- Apurva, P. (2011). Design and analysis of a pressure vessel. International Journal of Innovative Research in Technology & Science, Mumbai. Canonico, D. A. (2000). Adjusting the boiler code. Mechanical Engineering, 122(02), 54–57.
- Colgan, M., & Monaghan, J. (2003). Deep drawing process: analysis and experiment. Journal of Materials Processing Technology, 132(1-3), 35–41. da Silva Costa, G. C., & de Resende, A. A. (2020). Evaluation of the TIG–MIG/MAG welding process in direct polarity. SN Applied Sciences, 2(2), 4–6.
- Dalmış, I. S., & Eruslu, S. O. (2025). Failure analysis of deep drawn single-piece pressure vessels. Mechanics, 31, 358–367.
- Diamantoudis A.Th., & Kermanidis Th. (2005). Design by analysis versus design by formula of high strength steel pressure vessels: a comparative study. International Journal of Pressure Vessels and Piping,82,43-50.
- Dwivedi, N., & Kumar, V. (2012). Burst pressure prediction of pressure vessel using FEA. International Journal of Engineering Research & Technology (IJERT), 1(7), 1–6.