Yıl 2017, Cilt 9 , Sayı 3, Sayfalar 113 - 124 2017-12-26

Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact

Umut ÇALIŞKAN [1] , Recep EKİCİ [2] , Mustafa Kemal Apalak [3]


 The repair technique of the composite patch with bonding adhesive are used with the purpose of repairing materials and increasing working life of the materials. In this study, the impact strength of notched metal materials repaired by composite patch investigated by numerically. Fiber reinforced laminated composite patch was modeled by using finite element model. Composite patch was bonded to damaged materials, and this structure was subjected to impact test. The geometrical and material non-linearities were considered in the explicit dynamic analysis. The notched plate was made of aluminum 6061-T6. The effects of design parameters, such as composite patch geometry, on the impact energy absorption of the plates were investigated. The metal notched plates were modeled as a Johnson-Cook material model and the composite patches were modeled orthotropic elastic material model and Hashin damage. In the analysis results, the damage mechanisms of composite patch were exhibited and strength of damaged materials was exhibited in terms of contact force, kinetic energy and stress distributions. The effect of patch geometries was also investigated in terms of absorbing impact energies. As the plates without patch perforated, repaired metal notched plates with composite patch did not perforate.

Composite Patch, Notched Materials, Impact, Non-linear Finite Element Method
  • Mall, S. and Conley, D.S. (2009). Modeling and validation of composite patch repair to cracked thick and thin metallic panels. Composites: Part A, 40, 1331-1339. https://doi.org/10.1016/j.compositesa.2008.08.007.
  • Shams, S.S. and El-Hajjar, R.F. (2013). Overlay patch repair of scratch damage in carbon fiber/epoxy laminated composites. Composites: Part A, 49, 148-156, https://doi.org/10.1016/j.compositesa.2013.03.005.
  • Albedah, A., Khan, S.M.A., Benyahia, F. and Bouiadjra, B.B. (2016). Effect of load amplitude change on the fatigue life of cracked Al plate repaired with composite patch. International Journal of Fatigue, 88, 1-9, https://doi.org/10.1016/j.ijfatigue.2016.03.002.
  • Cheng, P., Gong, X.J., Aivazzadeh, S. and Xiao, X. (2014). Experimental observation of tensile behavior of patch repaired composites. Polymer Testing, 34, 146-154, https://doi.org/10.1016/j.polymertesting.2014.01.007.
  • Constantin, N., Sandu, M. and Sorohan, Ş. (2013). Restoration of the mechanical performance of damaged Al panels using bonded composite repair patches. International Journal of Adhesion & Adhesives, 42, 69-76, https://doi.org/10.1016/j.ijadhadh.2013.01.003.
  • Errouane, H., Sereir, Z. and Chateauneuf, A. (2014). Numerical model for optimal design of composite patch repair of cracked aluminum plates under tension. International Journal of Adhesion & Adhesives, 49, 64-72, https://doi.org/10.1016/j.ijadhadh.2013.12.004 .
  • Benyahia, F., Aminallah, L., Albedah, A., Bouiadjra, B.B. and Achour, T. (2015). Experimental and numerical analysis of bonded composite patch repair in aluminum alloy 7075 T6. Materials and Design, 73, 67-73, https://doi.org/10.1016/j.matdes.2015.02.009.
  • Sabelkin, V., Mall, S., Hansen, M.A., Vandawaker, R.M. and Derriso, M. (2007). Investigation into cracked aluminum plate repaired with bonded composite patch. Composite Structures, 79, 55-66, https://doi.org/10.1016/j.compstruct.2005.11.028.
  • ABAQUS/Explicit (Version 6.14), User’s manual, Finite Element Software. Available from: http://www.simulia. com.
  • Manes, A., Serpellini, F., Pagani, M., Saponara, M. and Giglio, M. (2014). Perforation and penetration of aluminium target plates by armour piercing bullets. International Journal of Impact Engineering, 69, 39-54, https://doi.org/10.1016/j.ijimpeng.2014.02.010.
  • Singh, H., Namala, K. K. and Mahajan, P. (2015). A damage evolution study of E-glass/epoxy composite under low velocity impact. Composites Part B,76, 235-248, https://doi.org/10.1016/j.compositesb.2015.02.016.
Konular Mühendislik, Ortak Disiplinler
Bölüm Makaleler
Yazarlar

Yazar: Umut ÇALIŞKAN
Kurum: ERCİYES ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Recep EKİCİ
Kurum: ERCİYES ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Mustafa Kemal Apalak
Kurum: ERCİYES ÜNİVERSİTESİ
Ülke: Turkey


Tarihler

Yayımlanma Tarihi : 26 Aralık 2017

Bibtex @araştırma makalesi { umagd349964, journal = {International Journal of Engineering Research and Development}, issn = {}, eissn = {1308-5514}, address = {Kırıkkale Üniversitesi Mühendislik Fakültesi Dekanlığı Kampüs 71450 Yahşihan/KIRIKKALE}, publisher = {Kırıkkale Üniversitesi}, year = {2017}, volume = {9}, pages = {113 - 124}, doi = {10.29137/umagd.349964}, title = {Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact}, key = {cite}, author = {ÇALIŞKAN, Umut and EKİCİ, Recep and Apalak, Mustafa Kemal} }
APA ÇALIŞKAN, U , EKİCİ, R , Apalak, M . (2017). Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact. International Journal of Engineering Research and Development , 9 (3) , 113-124 . DOI: 10.29137/umagd.349964
MLA ÇALIŞKAN, U , EKİCİ, R , Apalak, M . "Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact". International Journal of Engineering Research and Development 9 (2017 ): 113-124 <https://dergipark.org.tr/tr/pub/umagd/issue/33339/349964>
Chicago ÇALIŞKAN, U , EKİCİ, R , Apalak, M . "Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact". International Journal of Engineering Research and Development 9 (2017 ): 113-124
RIS TY - JOUR T1 - Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact AU - Umut ÇALIŞKAN , Recep EKİCİ , Mustafa Kemal Apalak Y1 - 2017 PY - 2017 N1 - doi: 10.29137/umagd.349964 DO - 10.29137/umagd.349964 T2 - International Journal of Engineering Research and Development JF - Journal JO - JOR SP - 113 EP - 124 VL - 9 IS - 3 SN - -1308-5514 M3 - doi: 10.29137/umagd.349964 UR - https://doi.org/10.29137/umagd.349964 Y2 - 2017 ER -
EndNote %0 Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact %A Umut ÇALIŞKAN , Recep EKİCİ , Mustafa Kemal Apalak %T Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact %D 2017 %J International Journal of Engineering Research and Development %P -1308-5514 %V 9 %N 3 %R doi: 10.29137/umagd.349964 %U 10.29137/umagd.349964
ISNAD ÇALIŞKAN, Umut , EKİCİ, Recep , Apalak, Mustafa Kemal . "Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact". International Journal of Engineering Research and Development 9 / 3 (Aralık 2017): 113-124 . https://doi.org/10.29137/umagd.349964
AMA ÇALIŞKAN U , EKİCİ R , Apalak M . Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact. IJERAD. 2017; 9(3): 113-124.
Vancouver ÇALIŞKAN U , EKİCİ R , Apalak M . Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact. International Journal of Engineering Research and Development. 2017; 9(3): 124-113.