DEVELOPMENT AND CONTROL OF A HIGH PRECISION STEWART PLATFORM

Yıl 2011, Cilt: 3 Sayı: 1, 51 - 59, 01.03.2011

Selçuk Kızır Zafer Bıngül Cüneyt Oysu Serdar Küçük

Öz

In this paper, development and control of a high precision 6 DOF parallel manipulator (Stewart platform) is presented. A kinematic analysis of 6-6 Stewart platform (SP) was designed and simulated in Solidworks. Also its dynamic model is developed in Matlab-Simulink environments. Platform has two main bodies (top and base plates) and six legs connecting top body to base body via universal joints. SP legs were chosen as a highresolution direct drive motor with a 500nm design resolution from PI Company. Each motor is controlled by a simple PID control within their design resolution. Optimized PID control is designed in SIMULINK environment and embedded in a Dspace DS1103 real time controller. The trajectory and position control of SP was achieved with 500nm accuracy

Anahtar Kelimeler

parallel manipulator, Stewart platform, nano positioning, PID

Kaynakça

• K.H. Hunt. Structural kinematics of in-parallel-actuated robot-arms. ASME J. Mech., Trans. Automat. Des., vol. 105, pp. 705–712, 1983
• B. Dasgupta, T.S. Mruthyunjaya. The Stewart Platform manipulator: a review. Mechanism and Machine Theory 35 (2000) 15-40, December 1998
• P. Nauna, K.J. Waldron and V. Murthy. Direct kinematic solution of a Stewart Platform. IEEE. Trans. Robotics Automat. 6 (4), 438-444, 1990.
• J. P. Merlet. Direct kinematics and assembly modes of parallel manipulators. Int. J. of Robotics Research, 11(2):150-162, 1992
• N. X. Chen and S. M. Song. Direct position analysis of the 4-6 Stewart Platform. ASME J. of Mechanical Design, 116(1):61-66, 1994
• Q. Liao, L. D. Seneviratne and S.W.E. Earles. Forward kinematic analysis for the general 6 Stewart Platform. Intelligent Robots and Systems, IROS '93. Proc. of the IEEE/RSJ International Conference, Volume 3, pp. 1659-1665, July 1993
• E.F. Fitcher. A Stewart Platform-Based Manipulator: General Theory and Practical Construction. Int. J. of Robotics Research, Vol5 No 2 pp 157-182, 1986
• D. Kim and W. Chung. Analytic Singularity Equation and Analysis of Six-DOF Parallel Manipulators Using Local Structurization Method. IEEE Transactions on Robotics and Automation, Vol. 15, No. 4, August 1999.
• J. Sefrioui and C.M. Gosselin. Singularity analysis and representation of planar parallel manipulators. Robot. Autom. Syst., vol. 10, pp.209-224, 1993
• L.W. Tsai. Solving the inverse dynamics of a Stewart–Gough manipulator by the principle of virtual work. J. Mech. Design (122):3-9, 2000
• B. Dasgupta, and T.S. Mruthyunjaya. A Newton–Euler formulation for the inverse dynamics of the Stewart Platform manipulator. Mech. Mach. Theory, 33(8):1135- , 1998
• C.C. Nguyen and F.J. Pooran. Dynamic analysis of a 6 DOF CKCM robot end-effector for dual-arm telerobot systems. Robot. Autom. Syst., 5, 377-394, 1989
• G. Lebret, K. Liu, and F.L. Lewis. Dynamic analysis and control of a Stewart Platform manipulator. J. Robot. Syst., 10(5):629-655, 1993
• J.D. Lee and Z. Geng. A dynamic model of a flexible Stewart Platform. Comput. Struct., 48(3):367-374, 1993
• J. Gallardo, J.M. Rico, D. Checcacci, and M. Bergamasco. Dynamics of parallel manipulators by means of screw theory. Mech. Mach. Theory, 38(11):1113-1131,
• J.G. Wang and C.M. Gosselin. A new approach for the dynamic analysis of parallel manipulators. Multibody Syst. Dyn., 2, 317-334, 1998
• S.H. Koekebakker, P.C. Teerhuis, A.J.J. Van der Weiden. Alternative parameterization in modelling and analysis of a Stewart Platform. Sel. Topics Ident. Model. Contr., , 59–68, 1996
• M.J. Liu, C.X. Li and C.N. Li. Dynamics analysis of the Gough-Stewart Platform manipulator. IEEE Trans. Robot. Autom., 16(1):94-98, 2000